General
Colour	Yellow

Identification rings of the brand Ses-Sterling, type Pliotex PT-V+ 30 5 yellow, are used for the clear identification of cables in the field of electrical and IT installations. These rings are specifically designed for cables with an outer diameter of 1.0 to 3.0 mm and are suitable for cable cross-sections in the range of 0.2 to 1.5 mm². The identification is achieved by a black print of the number "12,7 cm ( 5 inch ) on a yellow ring, enabling clear visibility and assignment. The rings are made of soft PVC, a flexible and shape-stable material that can be easily slid over cables and ensures a permanent identification.

Identification rings are used in electrical engineering and IT to uniquely identify cables, lines, or connections. This is particularly important in complex installations, during maintenance work, or for fault diagnosis, to avoid misassignment. The color yellow and the black print 5 provide high contrast, enabling quick recognition even under low lighting conditions or near other colored cables. The rings are packaged individually, allowing targeted selection and use without waste.

Functions and equipment in detail include the use of soft PVC as material, offering high flexibility and resistance to mechanical stress. The rings are pre-cut, so they can be directly slid over the cable without additional tools or cutting operations. The identification is achieved by a permanent, non-washable print that remains intact even after prolonged use or in humid environments. The packaging contains 100 pieces per bag, enabling economical handling in larger projects.

Technology explained simply shows that the rings, due to their composition of soft PVC, exhibit high elasticity, allowing them to be slid over cables with an outer diameter of 1.0 to 3.0 mm. The material is also resistant to minor mechanical stresses and temperature fluctuations typical in installation environments. The identification with the number "12,7 cm ( 5 inch ) is achieved by direct printing integrated into the ring's surface to minimize wear or contamination.

Compatibility and accessories refers to the use of the rings with cables within the specified diameter and cross-section range. The rings are not suitable for cables outside the range of 1.0 to 3.0 mm outer diameter, as they either cannot be slid over or will not fit securely. The rings are used exclusively as individual components for identification.

Mounting and installation is done by simply sliding the ring over the cable. Due to the pre-cut shape and the flexibility of the soft PVC material, no additional processing is required. After sliding, the rings fit securely and cannot be moved, ensuring permanent identification. The installation is quick and requires no special tools or skills.

Advantages in operation include easy handling, clear visibility of the identification, and long-term material durability. The rings enable quick cable identification, accelerating maintenance and fault repair. The use of soft PVC ensures high flexibility and shape stability, so the rings remain undamaged even with frequent movement or in tight cable runs. The packaging with 100 pieces per bag offers economical use for larger projects.