General
Colour	Orange

Identification rings PLIO-M-MARKERS type M-65 in orange colour with black print of identification number 3 are used for the unambiguous identification of cables in the field of electrical and IT installation. Manufacturer is Ses-Sterling, and the product is specifically designed for cables with an outer diameter of 4.2 to 6.6 mm. The identification rings are designed for cable cross-sections in the range of 10 to 16 mm², thus supporting proper identification in installations with medium to large cable cross-sections. The orange colour corresponds to the international colour code for identification number 3, enabling a standardised, globally understandable assignment.

Identification rings are used in electrical installation to uniquely identify cables, lines or connections. This is particularly important in complex systems, where incorrect assignment can lead to malfunctions or safety risks. The PLIO-M-MARKERS type M-65 are designed for quick and secure mounting onto cables without requiring additional tools.

Functions and equipment in detail
The identification rings are made of soft PVC, a flexible and durable plastic that can be easily pulled over cables and ensures a stable fit. The tape form of the rings allows for easy handling, as they are pre-cut and can be directly pulled onto the cable. The black print of identification number 3 on an orange background ensures high readability, even under low lighting conditions or in complex installation situations. The colour scheme corresponds to the international colour code, widely used in the electrical and IT industry.

Technology explained simply
The use of soft PVC ensures sufficient elasticity, allowing the rings to adapt to the cable diameter and fit securely. The pre-cut tape form reduces installation time, as no additional cutting is required. The identification number 3 is printed in black on orange, providing high contrast and ensuring readability even after prolonged use or in dirty environments.

Compatibility and accessories
The identification rings are designed for cables with an outer diameter of 4.2 to 6.6 mm, corresponding to a cable cross-section size of 10 to 16 mm². They are therefore suitable for medium to large cables in industrial, commercial or building installations. The rings are used without additional tools; they are simply pulled over the cable and hold securely due to the elasticity of the material.

Installation and mounting
Mounting is done by simply pulling the rings over the cable. Due to the tape form and pre-cuts, no additional processing is required. The rings adapt to the cable diameter through the elasticity of the soft PVC and hold securely. Installation is thus quick and tool-free, reducing working time during installation. There are no specific mounting instructions or regulations beyond general handling.

Advantages in operation
The unambiguous identification via orange colour and identification number 3 enables quick cable identification, simplifying maintenance, servicing and fault diagnosis. The high readability of the black print on orange background ensures long-term visibility. The use of soft PVC ensures sufficient durability under normal operating conditions. The pre-cut tape form reduces installation time and increases efficiency during installation.

The packaging contains 100 pieces, sufficient for larger projects or series installations. The weight per piece is 0.23 g, indicating a lightweight but robust construction. The product is used exclusively for cable identification without additional functions such as electrical insulation or mechanical protection.