General
Colour	Grey

The article Plio-M-MARKERS M-16 8 grey from Ses-Sterling is a marking ring made of soft PVC, specifically designed for marking cables with an outer diameter of 1.1 to 1.5 mm and a cable cross-section of 0.4 mm². The rings are manufactured in strip form and pre-cut, enabling quick and easy installation. The grey colour provides clear visual identification, distinguishing well from other colours and being easily recognisable in technical installations. The packaging unit contains 1000 rings, suitable for larger installations or series mounting.

Applications
These marking rings are intended for use in electrical and IT installations, particularly for marking lines with an outer diameter between 1.1 and 1.5 mm. They are suitable, for example, for marking data cables, control lines, or other cables in building and industrial technology. The use of soft PVC ensures flexible adaptation to the cable surface without damaging it.

Functions and Equipment in Detail
The rings are made of soft PVC, a material known for its flexibility, resistance to mechanical stress, and low friction properties. The strip form allows for easy handling, as the rings are supplied in a continuous strip and are already pre-cut. This reduces installation time and minimises wear during processing. The grey colour serves as visual identification and is clearly visible in technical environments.

Technology Explained Simply
The marking rings are designed for cables with an outer diameter of 1.1 to 1.5 mm, corresponding to a cable cross-section of 0.4 mm². These dimensions are typical for fine control or data lines used in electrical installations or IT applications. The use of soft PVC ensures that the rings elastically fit around the cable without causing cracks or breaks. The pre-cut strip form simplifies installation, as no additional tools are required for separation.

Compatibility and Accessories
The rings are specifically developed for cables with an outer diameter of 1.1 to 1.5 mm. They are not suitable for larger or smaller cables, as the fit would not be guaranteed. Use in combination with other marking systems is possible as long as the cable dimensions match. There are no specific accessories recommended by the manufacturer for these rings.

Installation and Mounting
Installation is performed by simply sliding the ring onto the cable. Due to the pre-cut strip form, no additional tools are required. The rings fit securely onto the cable thanks to the flexibility of the soft PVC material, preventing displacement during operation. Installation is carried out without additional adhesives or fastening elements.

Advantages in Operation
The use of these marking rings enables clear and durable cable identification, simplifying maintenance and fault diagnosis in complex installations. The grey colour ensures good visibility, especially in environments with multiple cables of different colours. The pre-cut strip form reduces installation time and increases efficiency during mounting. The choice of soft PVC material ensures long service life and resistance to mechanical stress.

The packaging unit of 1000 rings is suitable for larger projects or series installations and reduces the number of necessary orders. The weight specification of 0.028 g per ring is technically relevant, as it affects transport and storage properties, although not directly relevant to the end user.