General
Colour	Black

The Helavia DA 230/300/40 black from Ses-Sterling are cable glands made of polychloroprene rubber, specifically designed for use in electrical and installation technology. These rubber glands provide secure and tight cable guidance through drill holes in wall or ceiling structures. The glands are black and enable a clean, professional cable installation, while simultaneously withstanding mechanical stress and environmental influences. Product number 02520188010 identifies this specific version, which is listed in the product group Protection

Form parts HELAVIA.

Cable glands are indispensable in electrical installations to protect cables from mechanical damage when passing through building components. The Helavia DA 230/300/40 black offer a firm yet elastic fit that adapts to the drill hole and ensures a tight seal. The use of polychloroprene rubber ensures high resistance to weathering, aging, and chemical stress, making them suitable for use in both indoor and outdoor environments. The glands are designed for drill holes with a diameter of 230 mm to 300 mm, with a gland length of 40 mm.

Polychloroprene rubber is a synthetic elastomer commonly used in electrical and installation technology due to its high elasticity, weather resistance, and chemical resistance. The material choice ensures a long service life of the glands, even under difficult environmental conditions. The black color is typical for electrical installation components and ensures unobtrusive integration into building elements. The glands are not intended for use in explosive environments, as no specific approvals or protection types (such as Ex) are mentioned.

The cable glands DA 230/300/40 are available in a packaging unit of 50 pieces. The weight per piece is 10 g, with the total packaging weighing 0.5 kg. These specifications refer to the packaging unit and are relevant for storage and handling. The glands are designed for use in electrical installations where secure and tight cable guidance through building components is required. They are typically used in wall or ceiling structures to protect cables from mechanical damage and ensure proper installation.

The compatibility of the glands is limited to drill holes with a diameter of 230 mm to 300 mm. The length of 40 mm allows sufficient embedding in the building components to ensure a stable and tight connection. The use is exclusively within the field of electrical and installation technology.

The installation and mounting is done by simply inserting the glands into the pre-drilled opening. The elastic shape of the polychloroprene rubber ensures that the glands adapt to the drill hole and provide a tight seal. No additional fastening or tools are required. The glands are suitable for use in wall and ceiling structures, where the drill hole must be properly prepared before inserting the glands.

The operational advantages lie in easy handling, high material durability, and secure sealing. The glands ensure long-term and reliable cable guidance, thereby extending the service life of the installation. The use of polychloroprene rubber ensures high weather resistance, making the glands suitable for outdoor use as well. The black color ensures unobtrusive integration into building elements, preserving the aesthetics of the installation.

The glands are available in a packaging unit of 50 pieces, with a weight of 10 g per piece. The total packaging weighs 0.5 kg. Product number 02520188010 identifies this specific version, which is listed in the product group Protection > Form parts HELAVIA. The specifications refer exclusively to the glands themselves, without additional tools, instructions, or documentation.

Application areas include electrical installations in residential and commercial buildings, where secure and tight cable guidance through wall or ceiling structures is required. The glands are designed for drill holes with a diameter of 230 mm to 300 mm and offer a length of 40 mm. The use is exclusively within the field of electrical and installation technology, with no specific approvals or protection types (such as Ex) mentioned. The glands are not intended for use in explosive environments.

The functions and equipment in detail include secure cable guidance through drill holes, mechanical protection, and tight sealing. The glands are made of polychloroprene rubber, ensuring high resistance to weathering, aging, and chemical stress. The black color is typical for electrical installation components and ensures unobtrusive integration into building elements.

Technology explained simply means that the glands are made of an elastic material that adapts to the drill hole and ensures a tight seal. The use of polychloroprene rubber ensures high weather resistance, making the glands suitable for outdoor use as well. The glands are not intended for use in explosive environments, as no specific approvals or protection types (such as Ex) are mentioned. The glands are suitable for use in wall and ceiling structures, where the drill hole must be properly prepared before inserting the glands.

The compatibility and accessories refer to use in drill holes with a diameter of 230 mm to 300 mm. The length of 40 mm allows sufficient embedding in the building components to ensure a stable and tight connection. The use is exclusively within the field of electrical and installation technology.

The installation and mounting is done by simply inserting the glands into the pre-drilled opening. The elastic shape of the polychloroprene rubber ensures that the glands adapt to the drill hole and provide a tight seal. No additional fastening or tools are required. The glands are suitable for use in wall and ceiling structures, where the drill hole must be properly prepared before inserting the glands.

The operational advantages lie in easy handling, high material durability, and secure sealing. The glands ensure long-term and reliable cable guidance, thereby extending the service life of the installation. The use of polychloroprene rubber ensures high weather resistance, making the glands suitable for outdoor use as well. The black color ensures unobtrusive integration into building elements, preserving the aesthetics of the installation.

The glands are available in a packaging unit of 50 pieces, with a weight of 10 g per piece. The total packaging weighs 0.5 kg. Product number 02520188010 identifies this specific version, which is listed in the product group Protection > Form parts HELAVIA. The specifications refer exclusively to the glands themselves, without additional tools, instructions, or documentation.