General
Colour	Black

The DK-TPE 8/14/18-2 cable glands from Ses-Sterling are rubber glands made of thermoplastic elastomer (TPE), specifically designed for use in electrical and installation technology. They serve as a protective sleeve for guiding and sealing cables and wires through drill holes in wall or ceiling structures. The glands are available in the colour black and enable a secure, durable, and flexible installation of electrical wiring. The designation DK-TPE 8/14/18-2 describes the technical dimensions: an outer diameter of 8 mm, an inner diameter of 14 mm, and a total length of 18 mm, where the digit 2 refers to the specific design type.

Applications
These cable glands are used in electrical installations, particularly for routing cables through building elements such as concrete, drywall, or wood. They protect the wiring from mechanical stress, such as friction or pressure, and prevent the ingress of dust, moisture, or insects. Due to their elastic properties, they adapt to the drill holes and ensure a tight, yet not overly tight, guidance of the cables. The glands are intended for indoor use, with the TPE material composition providing high flexibility and resistance to ageing and UV radiation.

Functions and Features in Detail
The rubber glands are made of TPE material, a thermoplastic elastomer that combines the elasticity of rubber with the processability of plastics. This allows for easy installation and a long service life under normal operating conditions. The glands are solid throughout, meaning they have a uniform wall thickness along their entire length, ensuring consistent cable guidance. The black colour ensures discreet integration into the installation, especially in technical rooms or visible cable runs.

Technology Explained Simply
The designation DK-TPE 8/14/18-2 describes the geometric dimensions: the outer diameter is 8 mm, the inner diameter is 14 mm, and the total length of the gland is 18 mm. The digit 2 refers to the specific shape, designed for optimal fit in drill holes. The material TPE (Thermoplastic Elastomer) is known for its high elasticity, resistance to mechanical stress and chemical influences. It is also recyclable and provides good electrical insulation properties. The glands are not intended for use in explosive environments, but for general installations in buildings.

Compatibility and Accessories
The cable glands are designed for use with cables and wires having an outer diameter between 8 mm and 14 mm. They fit into drill holes with a diameter of approximately 8 mm, with the elastic shape of the TPE material enabling a secure and tight guidance. The glands do not require special tools or additional mounting aids; they are simply inserted into the drill hole and conform to the wall surface due to their elasticity.

Installation and Mounting
Installation is carried out by simply inserting the gland into the prepared drill hole. The elastic structure of the TPE material ensures that the gland adapts to the hole and provides a tight, yet not overly tight, guidance for the cables. The glands are not intended for use in moving or heavily loaded areas, but for static installations in walls, ceilings, or other building components. The packaging contains 100 pieces, which is sufficient for larger installations.

Operational Advantages
The DK-TPE 8/14/18-2 cable glands offer a reliable and durable solution for cable routing through building elements. The TPE material ensures high flexibility and resistance to mechanical stress, extending the service life of the glands. The black finish ensures discreet integration into the installation. The simple installation process and high availability in packages of 100 pieces make them a practical solution for electricians and tradespeople. The glands are not intended for outdoor use, as no specific weather resistance or IP protection rating is specified.