General
Colour	Black

The DM6 black cable strain relief from Ses-Sterling is a fastening component made of soft PVC, specifically developed to protect cables and lines during installation in installation systems. The product serves to reduce tensile stress on cables, particularly in areas where cables are routed through openings, conduits, or other guiding elements. The strain relief is placed between the cable and the guiding element to reduce mechanical stress and extend the service life of the lines. The black color allows for discreet integration into technical installations, especially in racks, enclosures, or cable ducts.

Cable strain relief is the central term for the function of this product: it absorbs the mechanical stress that occurs when pulling or laying cables. The DM6 is designed for cables with a diameter of 6.6 to 8 mm, making it suitable for a wide range of standard cables in the field of electrical and data installation. The use of soft PVC as material ensures high flexibility and elasticity, allowing the strain relief to adapt to the shape of the cable without causing damage. The material is also resistant to environmental influences commonly found in typical installation environments, such as moisture or minor temperature fluctuations.

Soft PVC as a material offers good sliding properties and prevents rubbing or abrasion on the cable surface. The strain relief is simply slipped over the cable and inserted into the corresponding opening or guide, immediately fulfilling its function. Installation requires no tools and is quick to perform, making technical installations more efficient. The packaging unit contains 100 pieces, enabling economical handling for larger projects or series installations.

The DM6 black strain relief is part of the product group soft PVC components from Ses-Sterling, which focuses on protective and guiding elements for cables and lines. These components are widely used in electrical and IT installations, as they maintain the mechanical integrity of cabling and simplify installation. The use of strain reliefs is common in installations within enclosures, server racks, or building automation systems, where cables are often routed through narrow openings.

Cable protection is another central aspect of the function: the strain relief protects the cable from mechanical damage caused by tensile stress or sharp edges. This is particularly important when installing sensitive data cables, such as network or sensor cables, which can lead to signal loss or failure if damaged. The strain relief thus serves not only to reduce mechanical stress but also to ensure the functionality of the entire installation.

The packaging unit of 100 pieces enables efficient storage and distribution, especially in workshops or large-scale installations. The weight of 2.52 g per piece is low, facilitating handling and transportation. The product designation DM6 black and the manufacturer number 01310002010 are unique identifiers used in the trade and for ordering. The EAN number 3597470005392 serves for unique identification in the inventory management system.

Use in outdoor environments or humid conditions should therefore be evaluated based on specific requirements. The packaging is designed for professional use and provides a clear overview of the product features.

Installation systems benefit from the use of strain reliefs, as they improve installation quality and facilitate maintenance. The strain relief is not a substitute for proper cable routing, but a supplementary element that minimizes mechanical stress. It is used in combination with other fastening elements, such as cable ties or guide rails, to ensure structured and secure cabling.

The DM6 black strain relief is thus a standardized component for professional electrical and IT installations, designed to protect cables and increase installation efficiency. The use of soft PVC and the specific fit for cables with a diameter of 6.6 to 8 mm make the product a reliable tool in the daily work of installers.

The DM6 black strain relief from Ses-Sterling is a proven element for mechanical cable stress relief and for improving the quality of installations in technical systems.