Schweitzer ENZ22579, EAN: 4063514007343

Schweitzer ENZ22579 stand enclosure 22 HE

19 Inch-Technology > Rack Cabinets > Racksystems 21-30HE

Schweitzer ENZ22579 stand enclosure 22 HE

Lieske Part No. 407908
Mfg Part No ENZ22579
EAN-Code 4063514007343
Manufacturer Schweitzer
Here only 1.872,96 EUR
2.228,82 EUR incl. VAT

Further information for Schweitzer ENZ22579 stand enclosure 22 HE

General
Cabinet height22 HE
Front doorsteel sheet with 4 mm ESG glass (parsol grey)
Rear doorsteel sheet
Door lockswivel handle for 40 mm (PHZ), multi-point locking
Side wallsremovable, lockable
Bottom platethree-part with filter cassette
Roofwith brush strip and cover plate
Socket height100 mm
Leveling feet4 pieces
Cable retention railsSide-mounted
Mounting planeadjustable depth, pre-mounted front and rear
Clearance to doors105 mm
Screw setM6 (pack of 50 sets)
Surface protectionpowder-coated RAL 7035 light grey
Groundingfully earthed
The Schweitzer ENZ22579 is a 19-inch floor-standing enclosure with a height of 22 U, designed for use in network infrastructures and IT systems. It combines a modern design with practical equipment, enabling quick and efficient installation. The enclosure is fully earthed and provides a stable base for mounting network devices, servers, and other IT components. The front door is made of sheet steel with a 4 mm thick ESG glass panel in parsol grey, allowing clear visibility into the enclosure, while the rear door is also made of sheet steel. Both doors are equipped with a door locking mechanism featuring a swing handle for 40 mm (PHZ) and a multipoint locking system to ensure secure access.

Applications
This enclosure is suitable for use in server rooms, data centers, office IT infrastructures, and technical rooms where structured and secure installation of IT devices is required. The pre-mounted 19-inch rails at the front and rear, with adjustable depth mounting, allow flexible adaptation to different device heights. The 105 mm clearance to the doors ensures sufficient space to facilitate device mounting and maintenance.

Functions and Equipment in Detail
The enclosure features side-mounted cable strain relief rails that enable organized cable routing and prevent cable clutter. The removable side panels are lockable and provide additional protection against unauthorized access. The three-part base plate is equipped with a filter cassette, ensuring efficient air circulation and dust filtration. The roof is fitted with a brush strip and a cover plate to ensure clean and secure sealing. The 100 mm high plinth is fitted with four levelling feet, ensuring stable and level placement, and includes mounting holes for securing to the floor and for cable entry.

Technology Explained Simply
The adjustable depth 19-inch rails allow individual adjustment of mounting height to optimally utilize different device heights. The cable strain relief rails ensure structured cable routing, simplifying maintenance and fault diagnosis. The multipoint locking system on the doors provides a high security standard, protecting against unauthorized access. The filter cassette in the base plate supports air circulation and reduces dust accumulation inside the enclosure, which can extend the service life of installed devices.

Compatibility and Accessories
The enclosure is designed for mounting standard 19-inch devices and offers universal compatibility with common IT and network equipment. The pre-mounted mounting rails and cable strain relief rails facilitate integration into existing infrastructures. The removable side panels and lockable doors allow flexible use, depending on the security requirements of the application environment.

Mounting and Installation
Installation is facilitated by the pre-mounted mounting rails and levelling feet, enabling quick and secure setup. The mounting holes in the plinth allow securing to the floor to prevent shifting. The cable entry in the plinth simplifies bottom cable routing, ensuring a clean and structured installation.

Operational Advantages
The enclosure offers high operational reliability through full earthing and secure locking mechanisms. The structured cable routing and filter cassette contribute to ease of maintenance and extended service life of installed devices. The powder-coated surface in RAL 7035 light grey provides an attractive appearance and high corrosion resistance. A two-tone or black finish is available upon request to match individual design preferences.

Surface and Finish
The enclosure surface is powder-coated in RAL 7035 light grey, ensuring high resistance to dirt and corrosion. The neutral color blends well into most technical environments. The front door with the 4 mm ESG glass panel allows visual monitoring of installed devices without opening the doors. The removable side panels and lockable doors offer additional flexibility in use.

Reversible Door Hinge
The door hinge is reversible and fully removable, enabling flexible adaptation to different room geometries. This is particularly advantageous when installing in rooms with limited space or when mounting against walls with varying access points.

Screw Set
The delivery includes a screw set M6 (pack of 50), intended for mounting devices inside the enclosure. The screws are suitable for standard 19-inch mounting and simplify installation.

Complete Equipment
The enclosure is fully earthed, ensuring a safe and interference-free operating environment for sensitive IT devices. The combination of robust sheet steel, ESG glass, multipoint locking system, and filter cassette makes the Schweitzer ENZ22579 a reliable solution for professional IT infrastructures.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/407908
qrcode für Schweitzer ENZ22579 stand enclosure 22 HE