Schweitzer EFP18412, EAN: 4063514001679

Schweitzer EFP18412 wall distribution enclosure 18HE

19 Inch-Technology > Accessories/Equipment > Miscellaneous

Schweitzer EFP18412 wall distribution enclosure 18HE

Lieske Part No. 538611
Mfg Part No EFP18412
EAN-Code 4063514001679
Manufacturer Schweitzer
Here only 650,70 EUR
774,33 EUR incl. VAT

Further information for Schweitzer EFP18412 wall distribution enclosure 18HE

General
Type of enclosure19-inch wall-mounted distribution enclosure
ModelEasyFix
Back panel materialZinc-plated steel sheet
Front doorwith toughened glass panel parsol grey
Door locking1-point locking
Hinge positionInterchangeable
Swivel lever40 mm PHZ
Surface protectionPowder coating
ColourRAL 7035 light grey
Brush barstop and bottom
Ventilationpassively ventilated
Fan mountingprepared
Side panelspluggable with screw locking
Mountingon wall with lock holes and centre hole
Groundingfully earthed
Type of deliveryconstruction kit in individual carton
The Schweitzer EFP 18412 is a 19-inch wall-mounted distributor housing from the EasyFix series, designed for flexible mounting of network and IT components on walls in offices, server rooms or technical installations. The housing features a modular design with an adjustable-depth 19-inch plane and is suitable for use in racks and distribution systems. It includes a stable rear panel made of galvanized steel sheet, serving as a base module and equipped with lock holes for wall mounting. Additionally, a central hole is integrated into the rear panel to facilitate the installation of support profiles. The support profiles are also galvanized and serve as the base for the front, adjustable-depth 19-inch plane.

Applications
This housing is suitable for use in IT infrastructures where flexible and secure mounting of devices on walls is required. It is commonly used in offices, small server rooms, technical rooms, or during the installation of network and communication systems. The passively ventilated construction with brush strips at the top and bottom enables efficient cable routing and air circulation, supporting heat dissipation of mounted devices. The preparation for fan mounting offers the option to install additional cooling in case of higher heat generation.

Functions and Equipment in Detail
The housing consists of a base module with a stable rear panel and four support profiles, enabling the installation of 19-inch rack rails. The front plane is adjustable in depth, allowing devices of varying depths to be securely mounted. The plug-in side panels with screw locking ensure secure and quick installation without tools. The front door is fitted with a toughened safety glass (ESG) in parsol grey and features a swing handle with 40 mm half cylinder and a 1-point locking mechanism. The door hinge is reversible, allowing the door to be mounted on the left or right side depending on installation requirements. The surface is powder-coated in RAL 7035 light grey, with a two-tone version available upon request.

Technology Explained Simply
The housing construction allows for flexible adaptation to different mounting situations. The support profiles and rack rails are standardized for 19-inch devices, ensuring universal compatibility with network and IT components. The brush strips at the top and bottom ensure dust- and water-tight cable entry, preserving the integrity of cable connections. The passively ventilated design supports cooling of mounted devices, while the preparation for fan mounting offers an expansion option. The complete metallization of the housing ensures secure earthing, which is important for electrical safety and interference prevention.

Compatibility and Accessories
The housing is designed for 19-inch devices and offers an adjustable-depth mounting plane that can be adapted to the depth of the devices to be mounted. The plug-in side panels and modular design allow flexible adaptation to different requirements. The front door with toughened safety glass and 1-point locking mechanism provides secure access, with solid or perforated steel sheet doors available upon request. The preparation for fan mounting allows integration of cooling units if the passively ventilated construction is insufficient.

Installation and Mounting
Mounting is done on a wall using the integrated lock holes and the additional central hole in the rear panel. The support profiles are attached to the rear panel, positioning the 19-inch rack rails. The plug-in side panels are simply inserted into the designated holders, with the screw locking ensuring a secure connection. The front door is attached using the swing handle and 1-point locking mechanism. The door hinge is reversible, allowing the door to be mounted on the left or right side depending on space conditions. The housing is delivered as an assembly kit in an individual carton, requiring on-site assembly.

Operational Advantages
The housing offers flexible and secure mounting of IT and network devices on walls. The adjustable-depth 19-inch plane enables mounting of various devices without additional modifications. The brush strips ensure neat cable routing and prevent dust and moisture ingress. The passively ventilated construction supports device cooling, with the preparation for fan mounting offering an expansion option. The complete metallization ensures secure earthing, which is important for electrical safety. The powder-coated surface in RAL 7035 light grey provides a robust and attractive appearance that fits into various environments.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/538611
qrcode für Schweitzer EFP18412 wall distribution enclosure 18HE