Schweitzer EF12312, EAN: 4063514001280

Schweitzer EF12312 Wall Mount Enclosure 12HE 600x615x500

19 Inch-Technology > Rack Cabinets > Wallmount Racks

Schweitzer EF12312 Wall Mount Enclosure 12HE 600x615x500

Lieske Part No. 147062
Mfg Part No EF12312
EAN-Code 4063514001280
Manufacturer Schweitzer
Here only 492,97 EUR
586,63 EUR incl. VAT

Further information for Schweitzer EF12312 Wall Mount Enclosure 12HE 600x615x500

General
Type of enclosureWall-mounted distribution enclosure
Rack height12 HE
Front doorwith ESG glass, parsol grey
Hinge positionInterchangeable
Claspintegrated round lock
Door handleSwivel lever handle
Rear panelmade of galvanised steel sheet
Support profilesfour
DIN railtwo 19 inch
Enclosure partsPluggable
Brush barstop and bottom
Ventilationpassively ventilated
Fan mountingprepared
Surface protectionPowder coating
ColourRAL 7035 light grey
Groundingfully earthed
MountingWall mounting
Mounting screwsincluded in delivery scope
Packagingin single carton
The Schweitzer wall-mounted distribution enclosure EF 12312 is a flexible 19-inch system for wall mounting, designed for use in IT and electrical installations. It serves as a compact, lockable unit for housing network and communication devices as well as other electronic components in racks with a height of 12 U. The enclosure consists of a stable base module with a rear panel, support profiles, and integrated rack rails, supplemented by plug-in cover parts and a lockable front door with toughened safety glass (ESG). The construction allows for an adjustable-depth 19-inch mounting plane, optimizing the installation of devices with varying depths.

Applications

The EF 12312 is suitable for use in office and administrative environments, small server rooms, network and security system installations, and technical rooms where a compact, wall-mounted distribution unit is required. The passively ventilated design with brush strips at the top and bottom ensures efficient cable routing and air circulation, supporting heat dissipation from mounted devices. The provision for fan mounting enables enhanced cooling under higher load conditions.

Functions and Equipment in Detail

The enclosure features a stable rear panel made of galvanized steel sheet, serving as the base module and equipped with lock holes and an additional center hole for wall mounting. Four support profiles are mounted on this rear panel, forming the basis for the front, adjustable-depth 19-inch mounting plane. The two 19-inch rack rails allow for secure mounting of devices according to the standard 19-inch format. The front door is fitted with a toughened safety glass (ESG) in parsol grey, providing clear visibility of the installed devices. The door is equipped with a swing handle and an integrated round lock, ensuring secure closure. The door hinge is reversible, allowing flexible installation at different wall positions.

Technology Explained Simply

The construction of the EF 12312 is designed for modular and adaptable installation. The plug-in side panels with screw locking enable quick and secure assembly without tools. The brush strips at the top and bottom ensure dust- and water-tight cable entry, allowing the unit to be used even in environments with higher protection requirements. The surface is powder-coated in RAL 7035 light grey, providing high corrosion resistance and an attractive appearance. The enclosure is fully earthed, ensuring electrical safety and minimizing interference. The provision for fan mounting allows integration of cooling fans if the passively ventilated design is insufficient.

Compatibility and Accessories

The EF 12312 is designed for mounting devices in 19-inch format and offers an adjustable-depth mounting plane. The front door is standardly equipped with a toughened safety glass (ESG), but closed or perforated steel sheet doors are available upon request. The surface is standardly powder-coated in RAL 7035 light grey, with a two-tone finish available upon request. The unit is delivered in an individual carton, fully assembled and ready for use.

Installation and Mounting

Wall mounting is performed using the pre-drilled lock holes and the additional center hole on the rear panel. Mounting screws are included in the delivery. The adjustable-depth 19-inch mounting plane allows flexible installation of devices with different depths. The plug-in side panels and reversible door hinge increase installation flexibility. The brush strips at the top and bottom facilitate cable routing and ensure a clean and orderly installation.

Operational Advantages

The EF 12312 offers a compact, secure, and flexible solution for wall mounting of IT and electrical devices. The adjustable-depth mounting plane, the lockable front door with integrated round lock, and the passively ventilated design with brush strips ensure safe, orderly, and maintenance-friendly operation. The complete surface finishing and earthing enhance the safety and reliability of the installation. The modular design enables quick assembly and adaptation to different requirements.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/147062
qrcode für Schweitzer EF12312 Wall Mount Enclosure 12HE 600x615x500