| Weight & dimensions |
| Width | 552 mm |
| Depth | 345 mm |
| Height | 116 mm |
| Weight | 7600 g |
| Memory |
| Buffer size | 128 KB |
| Print quality |
| Colour | No |
| Maximum resolution | 360 x 360 DPI |
| Maximum printing width (columns) | 136 |
| Ports & interfaces |
| Standard interfaces | Parallel,USB 2.0 |
| Optional connectivity | Ethernet,Serial (RS-232) |
| Power |
| AC input frequency | 50/60 Hz |
| Voltage tolerance | 10 % |
| Power consumption (standby) | 1.5 W |
| Power consumption (typical) | 30.4 W |
| Other features |
| Dimensions (WxDxH) | 552 x 345 x 116 mm |
| Print technology |
| Print head | 24-pin |
| Standard printer languages | Epson ESC/P2,IBM ProPrinter |
| Paper handling |
| Continuous paper width range | 76 - 406 mm |
| Paper feed | Pull tractor,Push tractor |
| Cut sheet top margin | 0.5 mm |
| Printing |
| Maximum print speed | 390 cps |
| Character pitch | 10,12,15,17.1,20 cpi |
| Bitmap fonts | Courier,OCR-B,Orator,Prestige,Roman |
| Maximum number of copies | 4 copies |
| Maximum print speed (LQ) | 104 cps |
| Normal print speed | 312 cps |
| Typestyles supported | Double height,Double width,Emphasised,Enhanced,Italics,Subscript,Superscript,Underline |
| Sound emission |
| Noise level (quiet mode) | 52 dB |
| Noise level | 56 dB |
| Endurance |
| Ribbon life | 200 million characters |
| Mean time between failures (MTBF) | 10000 h |
LED damp-room diffuser light, 49 W, 7440 lm, SKI, IP65, symmetrical wide beam, 4000 K, Ra= 80, Ta -20 °C/+30 °C, L70>100000 h (@ Ta max), L80>70000 h (@ Ta max), L90>50000 h (@ Ta 25°C), highly chemical-resistant diffuser, clear with internal prisms, stainless steel closure (1.4571), housing made of glass-fiber reinforced polyester, color gray, for food areas, EAN/GTIN:4041254342054.Robust LED damp-room diffuser light for food areas in accordance with International Featured Standard Food. Highly impact-resistant glass-fiber reinforced polyester housing, shatter-proof, highly chemical-resistant special diffuser with high impact strength, clear with internal prisms. Multi-part, captive stainless steel clamps, two of which are safety locks, silicone seal. Painted aluminum reflector with highly efficient Zhaga-compliant LED modules, anti-glare elements and electronic ballast with overload and short-circuit protection.