SCHUCH 121120028, EAN: 4041254203522

SCHUCH 121120028 121/35 emergency exit self-adhesive

Light Systems > Special Purpose Lamps > Emergency Lights

SCHUCH 121120028 121/35 emergency exit self-adhesive

Lieske Part No. 207876
Mfg Part No 121120028
EAN-Code 4041254203522
Manufacturer SCHUCH
Here only 22,42 EUR
26,68 EUR incl. VAT

Further information for SCHUCH 121120028 121/35 emergency exit self-adhesive

General
Product typeStandard pictogram -
Applicationemergency exit signage -
Marking typeEmergency exit bottom -
Colour schemegreen/transparent -
MountingSelf-adhesive -
Compliance with standardsDIN EN ISO 7010, ASR A1.3 -
The product is a standard pictogram of the brand SCHUCH, type 121/35, with manufacturer number 121120028. It is a self-adhesive identification element in green/transparent colour, specifically designed for marking emergency exits in the lower area. The pictogram serves for emergency escape route identification in accordance with DIN EN ISO 7010 and ASR A1.3, enabling clear and unambiguous orientation for persons in an emergency. It is designed as accessory for emergency lights and is directly attached to the light or to the wall to visually highlight the path to an emergency exit.

Standard pictogram is a standardised symbol used in safety technology for marking hazards, emergencies or escape routes. The standard DIN EN ISO 7010 defines the graphic symbols for safety markings to ensure a uniform and globally understandable representation. The ASR A1.3 (Workplace Regulation) regulates the requirements for marking escape routes in workplaces. The pictogram 121/35 complies with these standards and is therefore suitable for use in industry, commerce, public buildings and other facilities where clear escape route marking is required.

Self-adhesive means that the pictogram is equipped with an adhesive layer on the back, allowing it to be mounted directly onto smooth surfaces such as metal, plastic or painted walls without additional fastening materials. The adhesive is formulated to ensure permanent adhesion without damaging the substrate. The green/transparent colour ensures good visibility, especially in combination with emergency lights, which typically emit green light to highlight the escape route.

Emergency exit below describes the specific orientation of the pictogram. It indicates the path to an emergency exit located below the light or mounting point. This orientation is important to avoid confusion and to ensure that persons in an emergency move directly in the correct direction. The representation is clear and unambiguous, ensuring quick understanding even in stressful situations.

Escape route marking is a central component of fire protection and safety planning. The marking must be placed so that it is visible from all relevant points in the building and clearly marks the path to a safe exit. The pictogram 121/35 is designed for this purpose and can be mounted on emergency lights or on walls near emergency exits. It is not intended as a replacement for an emergency light, but complements it to improve orientation.

Accessory for emergency lights is frequently used to enhance the functionality and visibility of the lights. The pictogram 121/35 is specifically developed for use with emergency lights and fits into common mounting concepts. It is directly attached to the light or to the wall, with the self-adhesive back enabling simple and quick installation. The use of standard pictograms is mandatory in many industries to comply with safety regulations.

Installation is carried out by simply removing the protective film and pressing the pictogram onto the desired surface. It is important that the substrate is clean, dry and free of grease to ensure optimal adhesion. It is not part of a complete emergency light system, but serves as supplementary marking.

The use of pictogram 121/35 contributes to improving safety in buildings by clearly and unambiguously marking the path to an emergency exit. It is an important component of comprehensive escape route marking and supports compliance with applicable standards and regulations. The combination of clear design, standardised representation and easy installation makes it a practical tool for electrical and safety technicians when installing emergency lights and escape route markings.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/207876
qrcode für SCHUCH 121120028 121/35 emergency exit self-adhesive