Schneider Electric ZBRRD, EAN: 3606480521164

Schneider Electric ZBRRD Progr. Receiver AC/DC for rope pull emergency switch

Industrial Material > Control devices / Pilot devices > Built-Command and signaling devices

Schneider Electric ZBRRD Progr. Receiver AC/DC for rope pull emergency switch

Lieske Part No. 798619
Mfg Part No ZBRRD
EAN-Code 3606480521164
Manufacturer Schneider Electric
Here only 256,50 EUR
305,24 EUR incl. VAT

Further information for Schneider Electric ZBRRD Progr. Receiver AC/DC for rope pull emergency switch

Complementary
Nominal output current0.3 A at 48 V DC conforming to IEC 60947-5-1; 3 A at 24 V DC conforming to UL 508; 1.5 A at 240 V AC conforming to IEC 60947-5-1; 3 A at 120 V AC conforming to IEC 60947-5-1; 3 A at 240 V AC conforming to UL 508; 3 A at 24 V DC conforming to CSA C22.2 No 14; 3 A at 240 V AC conforming to CSA C22.2 No 14
Output type2 relays
Output contacts2 C/O
Input output isolationGalvanic isolation
Time delay range0.5 s (tolerance: - 15...15 %)
Switching capacity in VA1250 VA
Maximum switching current5 mA AC/DC
Maximum switching voltage250 V AC/DC
[Us] rated supply voltage24...240 V AC/DC 50/60 Hz - 10...10 %
Communication port protocolZigbee green power at 2.4 GHz conforming to IEEE 802.15.4
Maximum sensing distance100 m in free field; 25 m transmitter in a plastic box type XAL D and receiver in a metal enclosure; 40 m transmitter in box type XAL D, receiver in metal enclosure and use relay-antenna
Response time< 30 ms after transmitter clicks
Utilisation categoryAC-15 : B300 conforming to IEC 60947-5-1; DC-12 conforming to IEC 60947-5-1
Breaking capacity15 W
Control circuit frequency50...60 Hz +/- 10 %
Short-circuit protection0.4 A fuse type fast blow
Operating positionAny position without derating
Electrical connection1 conductor cable 0.14…2.5 mm² - 26 AWG...14 AWG - solid - without cable end conforming to IEC 60947-1; 2 conductors cable 0.14…1.5 mm² - 26 AWG...16 AWG - solid - without cable end conforming to IEC 60947-1; 1 conductor cable 0.14…4 mm² - 26 AWG...12 AWG - flexible - with cable end conforming to IEC 60947-1; 2 conductors cable 0.14…1.5 mm² - 26 AWG...16 AWG - flexible - with cable end conforming to IEC 60947-1
Housing materialPolycarbonate
Status LED1 LED green for power ON; 2 LEDs green for relay ON; 2 LEDs green for function mode; 1 LED green and yellow for reception signal
Mounting support35 mm symmetrical DIN rail conforming to IEC 60715; Mounting plate
Rated short-duration power frequency withstand voltage1.5 kV 50 Hz conforming to IEC 60947-5-1
[Uimp] rated impulse withstand voltage4 kV
Surge withstand1 kV differential mode conforming to IEC 61000-4-5; 2 kV common mode conforming to IEC 61000-4-5
Number of channels1
Modulation TechniqueO-QPSK
Bandwidth5 MHz
Width36 mm
Height108 mm
Depth75 mm
Net weight0.13 kg
Tightening torque0.5…1 N.m conforming to IEC 60947-1
Contractual warranty
Warranty (in months)18
Environment
StandardsCSA C22.2 No 14; IEC 60947-5-1; UL 508; IEC 60947-1
Radio agreementRSS; SRRC; ANATEL; ARIB T66; FCC; ICASA
Product certificationsCCC; UL; GOST; CSA; C-Tick
MarkingCE
Ambient air temperature for storage-40…70 °C
Relative humidity90 % at -20…55 °C, without condensation conforming to ETSI EN 300 440-1
Vibration resistance+/- 7.5 mm (f= 5…14 Hz) conforming to IEC 60068-2-6; 2 gn (f= 8…150 Hz) conforming to IEC 60068-2-6
Shock resistance10 gn (duration = 16 ms) for 6000 shocks conforming to IEC 60068-2-27
IP degree of protectionIP20 (casing) conforming to IEC 60529; IP20 (terminals)
Pollution degree2 conforming to IEC 60664-1
Overvoltage categoryII conforming to IEC 60664-1
Insulation resistance> 500 MOhm at 500 V DC conforming to NF C 20-030
[Ui] rated insulation voltage250 V conforming to IEC 60664-1
Electrical durability100000 cycles
Mechanical durability1000000 cycles
Logistical informations
Country of originID
Main
Range of productHarmony
Product or component typeProgrammable receiver
Device short nameZBRRD
Product specific applicationInterface to actuators
Function of moduleBi-stable; Monostable
Reset time2 ms time delay
Transmission frequency2405 MHz
Antenna typeOmnidirectional
Antenna gain0 dBi
emission class5M00G7W
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height4.5 cm
Package 1 Width7.9 cm
Package 1 Length9.7 cm
Package 1 Weight138.0 g
Unit Type of Package 2S03
Number of Units in Package 264
Package 2 Height30.0 cm
Package 2 Width30.0 cm
Package 2 Length40.0 cm
Package 2 Weight9.541 kg
The wireless and battery-free radio push buttons, switches and sensors of the Harmony XB4R/XB5R series are used in many applications in the building sector (automatic gates, etc.) and industry (conveyor systems, etc.). The radio solutions impress with advantages such as low installation costs and times, high flexibility and mobility as well as maximum availability. This programmable receiver has 2 relay outputs. The receiver requires a nominal auxiliary voltage of 24-240V ACDC. The respective receiver is taught in using a simple key combination. The transmitter and receiver communicate via a worldwide free frequency band of 2.4 GHz and are approved for ZigBee Green Power. The possible range extends up to 100m in open field and 25m with a closed control cabinet. The existing certifications and compliance with standards ensure that the device can be used in many countries. Thanks to the Green Premium environmental label, you can receive detailed information on material content, environmental impact and circular economy that supports your sustainability goals.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/798619
qrcode für Schneider Electric ZBRRD Progr. Receiver AC/DC for rope pull emergency switch