Complementary
Output type	Transistor PNP
Output contacts	4 PNP
Time delay range	0.5 s (tolerance: +/- 15 %)
Maximum switching current	0.2 A DC
Minimum switching current	10 mA DC
[Us] rated supply voltage	24 V DC +/- 15 %
Maximum sensing distance	100 m in free field; 15 m transmitter in a plastic box type XAL D and receiver in a metal enclosure
Response time	< 30 ms after transmitter clicks
Utilisation category	DC-13 : R300
Maximum power consumption in W	20 W DC
Breaking capacity	4.8 W (per output)
Short-circuit protection	0.5 A fuse type fast blow
Operating position	Any position without derating
Electrical connection	1 conductor cable 0.14…2.5 mm² - 26 AWG...14 AWG - solid - without cable end; 2 conductors cable 0.14…1.5 mm² - 26 AWG...16 AWG - solid - without cable end; 1 conductor cable 0.14…4 mm² - 26 AWG...12 AWG - flexible - with cable end; 2 conductors cable 0.14…1.5 mm² - 26 AWG...16 AWG - flexible - with cable end
Tightening torque	0.6 N.m
Housing material	Polycarbonate
Status LED	1 LED green for power ON; 1 LED green and yellow for radiofrequency reception signal; 4 LEDs green for output active
Mounting support	35 mm symmetrical DIN rail
Width	36 mm
Height	108 mm
Depth	75 mm
Net weight	0.13 kg
Contractual warranty
Warranty (in months)	18
Environment
Standards	IEC 61010; IEC 61010-1; IEC 61010-2-201; UL 61010; UL 61010-1; UL 61010-2-201; EN 61010-1; EN 61010-2-201; CAN/CSA C22.2 No. 61010-1-12; IEC 60947-1; IEC 60068-2-6; IEC 60068-2-27; IEC 60529; IEC 60664-1; NF EN 61140; ETSI EN 301 489-1; ETSI EN 301 489-17; EN 55032; EN 55011; ETSI EN 300 328; IEEE 802.15.4; FCC CFR 47 part 15 class B
Product certifications	CE; UL; CB; UKCA; FCC; IC; CCC; Giteki
Ambient air temperature for storage	-40…70 °C
Relative humidity	5…90 %
Vibration resistance	+/- 7.5 mm (f= 5…8 Hz); 2 gn (f= 8…150 Hz)
Shock resistance	10 gn (duration = 16 ms) for 6000 shocks
IP degree of protection	IP20
Pollution degree	2
Overvoltage category	II
Insulation resistance	> 500 MOhm at 500 V DC
[Ui] rated insulation voltage	60 V
Logistical informations
Country of origin	ID
Main
Range of product	Harmony XB5R
Product or component type	Programmable receiver
Device short name	ZBRRC
Product specific application	Interface to PLC
Function of module	Monostable
Reset time	1 s time delay
Transmission frequency	2405 MHz
Antenna type	Omnidirectional
Antenna gain	0 dBi
Packing Units
Unit Type of Package 1	PCE
Number of Units in Package 1	1
Package 1 Height	4.6 cm
Package 1 Width	7.9 cm
Package 1 Length	9.6 cm
Package 1 Weight	122.0 g
Unit Type of Package 2	S03
Number of Units in Package 2	64
Package 2 Height	30.0 cm
Package 2 Width	30.0 cm
Package 2 Length	40.0 cm
Package 2 Weight	8.498 kg

The wireless and battery-free radio push buttons, switches and sensors of the Harmony XB4R/XB5R series are used in many applications in buildings (automatic gates, etc.) and industry (conveyor systems, etc.). The radio solutions impress with advantages such as low installation costs and times, high flexibility and mobility as well as maximum availability. The receiver requires a nominal auxiliary voltage of 24V DC and serves as an additional receiver for the Harmony Hub ZBRN, for example to control a light column wirelessly. The respective receiver is taught in using a simple key combination. The transmitter and receiver communicate via a worldwide free frequency band of 2.4 GHz and are approved for ZigBee Green Power. The possible range extends up to 100m in open field and 25m with a closed control cabinet. The existing certifications and compliance with standards ensure that it can be used in many countries. Thanks to the Green Premium ecolabel, you can obtain detailed information on material content, environmental impact and circular economy that supports your sustainability goals.