| Complementary |
| Nominal output current | 3 A |
| Output type | 2 relays |
| Output contacts | 2 C/O |
| Input output isolation | Galvanic isolation |
| Time delay range | 0.5 s (tolerance: +/- 15 %) |
| Switching capacity in VA | 1250 VA |
| Maximum switching current | 3 A AC/DC |
| Maximum switching voltage | 250 V AC/DC |
| [Us] rated supply voltage | 24...240 V AC/DC 50/60 Hz +/- 10 % |
| Maximum sensing distance | 100 m in free field; 15 m transmitter in a plastic box type XAL D and receiver in a metal enclosure |
| Response time | < 30 ms after transmitter clicks |
| Utilisation category | AC-15 : B300; DC-13 : R300 |
| Maximum power consumption in W | 3 W at 240 V AC; 2 W at 24 V DC |
| Breaking capacity | 750 VA |
| Control circuit frequency | 50...60 Hz +/- 10 % |
| Short-circuit protection | 0.5 A fuse type fast blow |
| Operating position | Any position without derating |
| Electrical connection | 1 conductor cable 0.14…2.5 mm² - 26 AWG...14 AWG - solid - without cable end; 2 conductors cable 0.14…1.5 mm² - 26 AWG...16 AWG - solid - without cable end; 1 conductor cable 0.14…4 mm² - 26 AWG...12 AWG - flexible - with cable end; 2 conductors cable 0.14…1.5 mm² - 26 AWG...16 AWG - flexible - with cable end |
| Tightening torque | 0.6 N.m |
| Housing material | Polycarbonate |
| Status LED | 1 LED green for power ON; 2 LEDs green for relay ON; 2 LEDs green for function mode; 1 LED green and yellow for radiofrequency reception signal |
| Mounting support | 35 mm symmetrical DIN rail |
| Number of channels | 1 |
| Width | 36 mm |
| Height | 108 mm |
| Depth | 75 mm |
| Net weight | 0.13 kg |
| Contractual warranty |
| Warranty (in months) | 18 |
| Environment |
| Standards | IEC 61010; IEC 61010-1; IEC 61010-2-201; UL 61010; UL 61010-1; UL 61010-2-201; EN 61010-1; EN 61010-2-201; CAN/CSA C22.2 No. 61010-1-12; IEC 60947-1; IEC 60068-2-6; IEC 60068-2-27; IEC 60529; IEC 60664-1; NF EN 61140; ETSI EN 301 489-1; ETSI EN 301 489-17; EN 55032; EN 55011; ETSI EN 300 328; IEEE 802.15.4; FCC CFR 47 part 15 class B |
| Product certifications | CE; UL; CB; UKCA; FCC; IC; CCC; Giteki |
| Ambient air temperature for storage | -40…70 °C |
| Relative humidity | 5…90 % |
| Vibration resistance | +/- 7.5 mm (f= 5…8 Hz); 2 gn (f= 8…150 Hz) |
| Shock resistance | 10 gn (duration = 16 ms) for 6000 shocks |
| IP degree of protection | IP20 |
| Pollution degree | 2 |
| Overvoltage category | II |
| Insulation resistance | > 500 MOhm at 500 V DC |
| [Ui] rated insulation voltage | 250 V |
| Mechanical durability | 1000000 cycles |
| Logistical informations |
| Country of origin | ID |
| Main |
| Range of product | Harmony XB5R |
| Product or component type | Programmable receiver |
| Device short name | ZBRRA |
| Product specific application | Interface to actuators |
| Function of module | Bi-stable; Monostable; Enable/disable |
| Reset time | 1 s time delay |
| Transmission frequency | 2405 MHz |
| Antenna type | Omnidirectional |
| Antenna gain | 0 dBi |
| Packing Units |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 4.6 cm |
| Package 1 Width | 8 cm |
| Package 1 Length | 9.6 cm |
| Package 1 Weight | 138 g |
| Unit Type of Package 2 | S03 |
| Number of Units in Package 2 | 64 |
| Package 2 Height | 30 cm |
| Package 2 Width | 30 cm |
| Package 2 Length | 40 cm |
| Package 2 Weight | 9.479 kg |
The wireless and battery-free radio push buttons, switches and sensors of the Harmony XB4R/XB5R series are used in many applications in the building sector (automatic gates, etc.) and industry (conveyor systems, etc.). The radio solutions impress with advantages such as low installation costs and times, high flexibility and mobility as well as maximum availability. This programmable receiver has 2 relay outputs. The receiver requires a nominal auxiliary voltage of 24-240V ACDC. The respective receiver is taught in using a simple key combination. The transmitter and receiver communicate via a worldwide free frequency band of 2.4 GHz and are approved for ZigBee Green Power. The possible range extends up to 100m in open field and 25m with a closed control cabinet. The existing certifications and compliance with standards ensure that the device can be used in many countries. Thanks to the Green Premium environmental label, you can receive detailed information on material content, environmental impact and circular economy that supports your sustainability goals.