Complementary
Maximum radio communication distance	100 m in free field; 250 m if a relay antenna is located between the transmitter and Harmony Hub; 60 m if an external antenna is connected to Harmony Hub; 25 m with Harmony Hub installed in a metal housing or in a closed metal enclosure
Radio response time	< 30 ms
[Us] rated supply voltage	24...240 V AC/DC 50/60 Hz - 10...10 %
Immunity to microbreaks	10 ms
Maximum power consumption in W	4 W AC/DC
Breaking capacity	15 W
Control circuit frequency	50...60 Hz +/- 10 %
Short-circuit protection	16 A GB2 circuit breaker
Operating position	Any position
Mounting support	35 mm symmetrical DIN rail conforming to IEC 60715; Mounting plate
Electrical connection	1 conductor cable 0.2…4 mm² - 24 AWG...12 AWG - solid - without cable end conforming to IEC 60947-1; 2 conductors cable 0.2…1.5 mm² - 24 AWG...16 AWG - solid - without cable end conforming to IEC 60947-1; 1 conductor cable 0.2…0.75 mm² - 24 AWG...14 AWG - flexible - with cable end conforming to IEC 60947-1; 2 conductors cable 0.2…2.5 mm² - 24 AWG...18 AWG - flexible - with cable end conforming to IEC 60947-1
Tightening torque	0.35…0.4 N.m conforming to IEC 60947-1; 0.35…0.40 N.m conforming to IEC 60947-1
Housing material	Polycarbonate
Status LED	1 LED green for power ON; 1 LED yellow for communication network; 5 LEDs red for function mode; 1 LED green and yellow for reception signal
Rated short-duration power frequency withstand voltage	1.5 kV 50 Hz conforming to IEC 60947-5-1
[Uimp] rated impulse withstand voltage	4 kV
Surge withstand	1 kV differential mode conforming to IEC 61000-4-5; 2 kV common mode conforming to IEC 61000-4-5
Width	122 mm
Height	90 mm
Depth	60 mm
Net weight	0.27 kg
Antenna gain	0 dBi
Integrated connection type	1 isolated serial link 2 x RJ45 in parallel Modbus Serial line slave Modbus slave RTU asynchronous in baseband RS485, half duplex, 1.2...115.2 kbauds, 2 twisted shielded pairs
Data storage equipment	SD card
Topology	Devices linked by daisy-chaining or tap junctions
Data format	7 or 8 bits, 1 or 2 stop bits
Parity	No; Even; Odd
Contractual warranty
Warranty (in months)	18
Environment
Radio agreement	ANATEL, type III conforming to ETSI EN 301 489-3; FCC, category 2 conforming to ETSI EN 300 440-1; ICASA; RSS, category 1 conforming to ETSI EN 300 440-1; SRRC
Product certifications	GOST; CE; UL; C-Tick; CSA; CCC
Directives	2006/95/EC - low voltage directive; 2004/108/EC - electromagnetic compatibility; 1999/5/EC - R&TTE directive
Standards	CSA C22.2 No 14; IEC 62311; IEC 61131-2; ETSI EN 300 440-2; ETSI EN 300 328; IEC 60950-1; UL 508
Ambient air temperature for storage	-40…70 °C
Relative humidity	90 % at -25…55 °C, without condensation conforming to ETSI EN 300 440-1
Operating altitude	0...2000 m
Storage altitude	0…3000 m
Vibration resistance	+/- 3.5 mm (f = 5…14 Hz) conforming to IEC 60068-2-6; 1 gn (f = 5…150 Hz) on panel mounting conforming to IEC 60068-2-6; 2 gn (f = 8…150 Hz) on DIN rail conforming to IEC 60068-2-6
Shock resistance	10 gn (duration = 16 ms) for 6000 shocks conforming to IEC 60068-2-27
IP degree of protection	IP20 (casing) conforming to IEC 60529; IP20 (terminals)
Pollution degree	2 conforming to IEC 60664-1
Electromagnetic compatibility	1.2/50 µs shock waves immunity test - test level: 1 kV (differential mode) conforming to IEC 61000-4-5; 1.2/50 µs shock waves immunity test - test level: 2 kV (common mode) conforming to IEC 61000-4-5; Immunity to microbreaks and voltage drops - test level: 10 ms conforming to IEC 61000-4-11
Dielectric strength	3000 V between input and output AC; 4250 V between input and output DC; 1500 V between input and ground AC; 2150 V between input and ground DC
Logistical informations
Country of origin	ID
Main
Range of product	Harmony
Product or component type	Harmony Hub wireless/Serial Line gateway
Device short name	ZBRN2
Product specific application	Wireless Schneider Electric devices ecosystem
Function of module	Zigbee green power concentrator
Communication port protocol	Modbus client application
Antenna type	Integrated
Transmission frequency	2405…2480 MHz
Packing Units
Unit Type of Package 1	PCE
Number of Units in Package 1	1
Package 1 Height	7.300 cm
Package 1 Width	9.600 cm
Package 1 Length	13.000 cm
Package 1 Weight	308.000 g
Unit Type of Package 2	S02
Number of Units in Package 2	10
Package 2 Height	15 cm
Package 2 Width	30 cm
Package 2 Length	40 cm
Package 2 Weight	3.519 kg

The wireless and battery-free radio push buttons, switches and sensors of the Harmony XB4R/XB5R series are used in many applications in the building sector (automatic gates, etc.) and industry (conveyor systems, etc.). The radio solutions impress with advantages such as low installation costs and times, high flexibility and mobility as well as maximum availability. This device is connected serially via Modbus. The receiver requires a nominal auxiliary voltage of 24-240V ACDC. The respective receiver is taught in using a simple key combination. The transmitter and receiver communicate via a worldwide free frequency band of 2.4 GHz and are approved for ZigBee Green Power. The possible range extends up to 100m in open field and 25m with a closed control cabinet. The existing certifications and compliance with standards ensure that the device can be used in many countries. Thanks to the Green Premium environmental label, you can receive detailed information on material content, environmental impact and circular economy that supports your sustainability goals.