Schneider Electric ZBE702, EAN: 3389110089523

Schneider Electric ZBE702 Auxiliary Switch Block 1NO

Industrial Material > Control devices / Pilot devices > Built-Command and signaling devices

Schneider Electric ZBE702 Auxiliary Switch Block 1NO

Lieske Part No. 515004
Mfg Part No ZBE702
EAN-Code 3389110089523
Manufacturer Schneider Electric
Here only 57,19 EUR
68,06 EUR incl. VAT

Further information for Schneider Electric ZBE702 Auxiliary Switch Block 1NO

Complementary
Net weight0.011 kg
Contacts type and composition1 NC
Positive openingWith conforming to IEC 60947-5-1 appendix K
Operating travel1.5 mm (NC changing electrical state); 4.3 mm (total travel)
Operating force2 N NC changing electrical state
Mechanical durability5000000 cycles
Contacts materialSilver alloy (Ag/Ni)
Short-circuit protection4 A cartridge fuse type gG conforming to IEC 60947-5-1
[Ith] conventional free air thermal current6 A conforming to IEC 60947-5-1
[Ui] rated insulation voltage250 V (pollution degree 3) conforming to IEC 60947-1
[Uimp] rated impulse withstand voltage4 kV conforming to IEC 60947-1
[Ie] rated operational current3 A at 120 V, AC-15, B300 conforming to IEC 60947-5-1; 1.5 A at 240 V, AC-15, B300 conforming to IEC 60947-5-1; 0.1 A at 250 V, DC-13, R300 conforming to IEC 60947-5-1; 0.22 A at 125 V, DC-13, R300 conforming to IEC 60947-5-1
Contractual warranty
Warranty (in months)18
Environment
Protective treatmentTH
Ambient air temperature for storage-40…70 °C
Ambient air temperature for operation-25…70 °C
StandardsIEC 60947-5-4; JIS C8201-5-1; UL 508; IEC 60947-5-1; CSA C22.2 No 14; IEC 60947-1; JIS C8201-1
Product certificationsBV; UL; CSA; DNV; LROS (Lloyds register of shipping)
Vibration resistance5 gn (f= 2…500 Hz) conforming to IEC 60068-2-6
Shock resistance30 gn (duration = 18 ms) for half sine wave acceleration conforming to IEC 60068-2-27; 50 gn (duration = 11 ms) for half sine wave acceleration conforming to IEC 60068-2-27
Logistical informations
Country of originFR
Main
Range of productHarmony XB4; Harmony XB5
Product or component typeContact block
Device short nameZBE
Sale per indivisible quantity10
IP degree of protectionIP20 conforming to IEC 60529
Contact operationSlow-break
Contact block typeSingle
Contacts usageStandard contacts
Connections - terminalsPins for printed circuit board
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height0.7 cm
Package 1 Width2.0 cm
Package 1 Length3.0 cm
Package 1 Weight2.0 g
Unit Type of Package 2BB1
Number of Units in Package 210
Package 2 Height6.6 cm
Package 2 Width2.3 cm
Package 2 Length3.4 cm
Package 2 Weight24.0 g
Unit Type of Package 3S01
Number of Units in Package 3400
Package 3 Height15 cm
Package 3 Width15 cm
Package 3 Length40 cm
Package 3 Weight1.135 kg
The ZBE702 is an auxiliary switch block of the Harmony XB4 and XB5 series from Schneider Electric, specifically designed for use in industrial and building technology applications. As a contact block with one normally open contact (1O), it is used for signal transmission or controlling auxiliary functions in electrical circuits. It is modular in design and can be connected to pushbuttons, indicator lights, selector switches, or emergency stop switches of the Harmony series, supporting mounting dimensions of 22 mm and 30 mm. Mounting is done by snap-fitting onto a mounting flange, with the electrical connection made via pins for a printed circuit board. This enables flexible integration into existing control systems.

Applications
This auxiliary switch block is suitable for use in industrial controls, machine building, building technology, and other applications where reliable and robust signal transmission is required. The Harmony XB4 (metal) and XB5 (plastic) series offer high mechanical stability and are designed for use in demanding environments. Due to international standards compliance and certifications, the ZBE702 is suitable for use in various global markets.

Functions and Features in Detail
The contact block features a single normally open contact that switches in stages, ensuring positive opening according to IEC 60947-5-1, Annex K. The actuation force is 2 N, enabling precise and reliable switching performance. The operating stroke of the normally open contact is 1.5 mm under alternating electrical conditions, with a total stroke of 4.3 mm. The mechanical life is 5,000,000 cycles, ensuring high operational reliability over a long period. The contact material is a silver alloy (Ag/Ni), providing good electrical conductivity and high wear resistance.

Technical Explanation
The ZBE702 is designed for use in control systems where contacts are connected via a printed circuit board. The pins for the board enable a secure and stable electrical connection. The protection rating IP20 corresponds to IEC 60529 and protects against finger contact, but not against dust or water. The rated insulation voltage is 250 V at pollution degree 3, ensuring safe insulation in environments with increased contamination risk. The rated impulse voltage withstand is 4 kV, enhancing reliability during transient voltage surges. The conventional thermal current is 6 A in free air, defining the thermal load capacity of the device.

Compatibility and Accessories
The auxiliary switch block is compatible with the Harmony XB4 and XB5 series. It can be mounted on various mounting flanges, such as the ZB5AZ009. For mounting devices onto the flange, the device carrier ZB4BZ009 is available. A mounting key ZB5AZ905 enables secure tightening of the fastening elements. These accessories support flexible and secure installation of the contact block in various application scenarios.

Mounting and Installation
Mounting is done by snap-fitting the contact block onto a mounting flange attached to a pushbutton, indicator light, or other Harmony series devices. The electrical connection is made via pins that are inserted into a printed circuit board. Installation requires no special tools, except for a mounting key if the flange is screwed. The operating ambient temperature ranges from -25 °C to +70 °C, while the storage temperature can range from -40 °C to +70 °C.

Operational Advantages
The ZBE702 offers high mechanical life, reliable switching performance, and easy mounting. The use of standard contacts and compatibility with various Harmony devices enables flexible and modular system design. Certifications according to IEC 60947-5-4, UL 508, CSA C22.2 No. 14, and other standards ensure the safety and reliability of the device. Vibration resistance of 5 gn and shock resistance of 30 gn or 50 gn make the contact block suitable for use in moving or vibrating machinery. The warranty period is 18 months.

Standards and Certifications
The ZBE702 complies with standards IEC 60947-5-4, IEC 60947-5-1, IEC 60947-1, JIS C8201-5-1, JIS C8201-1, UL 508, and CSA C22.2 No. 14. Product certifications include BV, UL, CSA, DNV, and LROS (Lloyds Register of Shipping). These certifications confirm the safety, reliability, and international usability of the device. The Green Premium environmental label provides information on material contents, environmental impacts, and circular economy, supporting the implementation of sustainability goals. Batteries are not included in the delivery scope.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/515004
qrcode für Schneider Electric ZBE702 Auxiliary Switch Block 1NO