Schneider Electric ZBE701, EAN: 3389110089516

Schneider Electric ZBE701 Auxiliary Switch Block 1S

Industrial Material > Control devices / Pilot devices > Built-Command and signaling devices

Schneider Electric ZBE701 Auxiliary Switch Block 1S

Lieske Part No. 568641
Mfg Part No ZBE701
EAN-Code 3389110089516
Manufacturer Schneider Electric
Here only 57,19 EUR
68,06 EUR incl. VAT

Further information for Schneider Electric ZBE701 Auxiliary Switch Block 1S

Complementary
Net weight0.011 kg
Contacts type and composition1 NO
Positive openingWithout
Operating travel2.6 mm (NO changing electrical state); 4.3 mm (total travel)
Operating force2.3 N NO changing electrical state
Mechanical durability5000000 cycles
Contacts materialSilver alloy (Ag/Ni)
Short-circuit protection4 A cartridge fuse type gG conforming to IEC 60947-5-1
[Ith] conventional free air thermal current6 A conforming to IEC 60947-5-1
[Ui] rated insulation voltage250 V (pollution degree 3) conforming to IEC 60947-1
[Uimp] rated impulse withstand voltage4 kV conforming to IEC 60947-1
[Ie] rated operational current3 A at 120 V, AC-15, B300 conforming to IEC 60947-5-1; 1.5 A at 240 V, AC-15, B300 conforming to IEC 60947-5-1; 0.1 A at 250 V, DC-13, R300 conforming to IEC 60947-5-1; 0.22 A at 125 V, DC-13, R300 conforming to IEC 60947-5-1
Contractual warranty
Warranty (in months)18
Environment
Protective treatmentTH
Ambient air temperature for storage-40…70 °C
Ambient air temperature for operation-25…70 °C
StandardsIEC 60947-5-1; IEC 60947-1; UL 508; IEC 60947-5-4; JIS C8201-5-1; CSA C22.2 No 14; JIS C8201-1
Product certificationsBV; UL; CSA; DNV; LROS (Lloyds register of shipping)
Vibration resistance5 gn (f= 2…500 Hz) conforming to IEC 60068-2-6
Shock resistance30 gn (duration = 18 ms) for half sine wave acceleration conforming to IEC 60068-2-27; 50 gn (duration = 11 ms) for half sine wave acceleration conforming to IEC 60068-2-27
Logistical informations
Country of originFR
Main
Range of productHarmony XB4; Harmony XB5
Product or component typeContact block
Device short nameZBE
Sale per indivisible quantity10
IP degree of protectionIP20 conforming to IEC 60529
Contact operationSlow-break
Contact block typeSingle
Contacts usageStandard contacts
Connections - terminalsPins for printed circuit board
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height0.500 cm
Package 1 Width2.000 cm
Package 1 Length3.000 cm
Package 1 Weight1.700 g
Unit Type of Package 2BB1
Number of Units in Package 210
Package 2 Height2.500 cm
Package 2 Width3.500 cm
Package 2 Length6.500 cm
Package 2 Weight22.000 g
Unit Type of Package 3S01
Number of Units in Package 3400
Package 3 Height15 cm
Package 3 Width15 cm
Package 3 Length40 cm
Package 3 Weight1.085 kg
The article ZBE701 from Schneider Electric is an auxiliary switch of the Harmony XB4 and XB5 series, specifically designed as a contact block for industrial command and signaling devices. It serves as a modular add-on to extend pushbuttons, signal lamps, or selector switches, enabling the integration of switching functions into existing control panels. The contact block is designed for mounting dimensions of 22 mm and 30 mm and is secured via a mounting flange, ensuring a reliable installation in control panels or operator interfaces. Electrical connection is made via pins for PCB, which are directly inserted into a printed circuit board, allowing for compact and reliable integration into electronic controls.

Applications

The auxiliary switch ZBE701 is intended for use in industrial plants, machine controls, and building automation systems. Due to its modular design and compatibility with the Harmony XB4 (metal) and XB5 (plastic) series, it can be flexibly integrated into existing operator concepts. The devices are particularly suitable for applications requiring additional switching functions such as status indication, feedback, or control signals. The robust construction and certification to international standards also make it suitable for demanding environments.

Functions and Equipment in Detail

The contact block features 1 normally open contact (1S) as a standard contact. The contacts are made of a silver alloy (Ag/Ni), ensuring high contact reliability and resistance to contamination and oxidation. Operation is step-switching, with the operating stroke of the normally open contact being 2.6 mm under alternating electrical state and a total stroke of 4.3 mm. The actuation force is 2.3 N, enabling precise and powerful switching motion. The mechanical life is 5,000,000 cycles, indicating high durability and long service life.

Technology Explained Simply

The contact block is designed for use in electrical circuits where the normally open contact closes the circuit when the main device (e.g., pushbutton) is actuated. Rated operating currents are 3 A at 120 V (AC-15, B300) and 1.5 A at 240 V (AC-15, B300), as well as 0.1 A at 250 V (DC-13, R300) and 0.22 A at 125 V (DC-13, R300). The conventional thermal current (Ith) is 6 A in free air, describing the thermal load capacity of the device. The rated insulation voltage (Ui) is 250 V at pollution degree 3, ensuring electrical insulation for use in contaminated environments. The rated impulse voltage withstand (Uimp) is 4 kV, describing the device’s ability to withstand electrical overvoltages. For short-circuit protection, a 4 A fuse cartridge type gG is specified to protect against overloads.

Compatibility and Accessories

The auxiliary switch ZBE701 is compatible with the Harmony XB4 and XB5 series and can be combined with various accessories. These include the mounting flange ZB5AZ009 for installation on the device carrier, the device carrier ZB4BZ009 made of metal, and the mounting key ZB5AZ905 for secure fastening. These components enable flexible and secure integration into existing control panels and switchboards.

Mounting and Installation

Mounting is done by snapping the contact block onto the respective mounting flange, which is attached to the front plate of the main device (e.g., pushbutton). Electrical connection is made via pins directly inserted into the printed circuit board. Installation is therefore quick and can be done without additional tools. The operating temperature range is between -25 °C and +70 °C, and the storage temperature range is between -40 °C and +70 °C. The protection rating IP20 corresponds to IEC 60529 and protects against finger contact and solid foreign objects, but not against water or dust.

Operational Advantages

The auxiliary switch ZBE701 offers high reliability due to the use of silver alloy contacts and a long service life of 5,000,000 switching cycles. The modular design allows flexible adaptation to different requirements. Certifications to IEC 60947-5-1, IEC 60947-1, UL 508, CSA C22.2 No. 14, and other standards ensure international usability. Vibration resistance of 5 gn (f= 2…500 Hz) and shock resistance of 30 gn (18 ms) or 50 gn (11 ms) make the device suitable for use in moving or vibrating installations. The Green Premium environmental label provides detailed information on material contents and environmental impacts, supporting sustainability goals.

Standards and Certifications

The device complies with standards IEC 60947-5-1, IEC 60947-1, UL 508, IEC 60947-5-4, JIS C8201-5-1, CSA C22.2 No. 14, and JIS C8201-1. Product certifications include BV, UL, CSA, DNV, and LROS (Lloyds Register of Shipping), ensuring international recognition and usability in various markets. The warranty period is 18 months.

Protection Rating and Environmental Conditions

The protection rating IP20 protects against finger contact and solid foreign objects, but is not waterproof or dustproof. The operating temperature range is between -25 °C and +70 °C, and the storage temperature range is between -40 °C and +70 °C. The devices are designed for indoor use, with environmental conditions within the specified temperature ranges.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/568641
qrcode für Schneider Electric ZBE701 Auxiliary Switch Block 1S