Schneider Electric ZBE102, EAN: 3389110089486

Schneider Electric ZBE102 Auxiliary Switch Block 1NO Screw Terminal

Industrial Material > Control devices / Pilot devices > Built-Command and signaling devices

Schneider Electric ZBE102 Auxiliary Switch Block 1NO Screw Terminal

Lieske Part No. 418832
Mfg Part No ZBE102
EAN-Code 3389110089486
Manufacturer Schneider Electric
Here only 3,72 EUR
4,43 EUR incl. VAT

Further information for Schneider Electric ZBE102 Auxiliary Switch Block 1NO Screw Terminal

Complementary
Net weight0.011 kg
Contacts type and composition1 NC
Positive openingWith conforming to IEC 60947-5-1 appendix K
Operating travel1.5 mm (NC changing electrical state); 4.3 mm (total travel)
Operating force2 N NC changing electrical state
Mechanical durability10000000 cycles
Tightening torque0.8…1.2 N.m conforming to IEC 60947-1
Shape of screw headCross compatible with pozidriv No 1 screwdriver; Slotted compatible with flat Ø 4 mm screwdriver; Slotted compatible with flat Ø 5.5 mm screwdriver
Contacts materialSilver alloy (Ag/Ni)
Short-circuit protection10 A cartridge fuse type gG conforming to IEC 60947-5-1
[Ith] conventional free air thermal current10 A conforming to IEC 60947-5-1
[Ui] rated insulation voltage600 V (pollution degree 3) conforming to IEC 60947-1
[Uimp] rated impulse withstand voltage6 kV conforming to IEC 60947-1
[Ie] rated operational current3 A at 240 V, AC-15, A600 conforming to IEC 60947-5-1; 6 A at 120 V, AC-15, A600 conforming to IEC 60947-5-1; 0.1 A at 600 V, DC-13, Q600 conforming to IEC 60947-5-1; 0.27 A at 250 V, DC-13, Q600 conforming to IEC 60947-5-1; 0.55 A at 125 V, DC-13, Q600 conforming to IEC 60947-5-1; 1.2 A at 600 V, AC-15, A600 conforming to IEC 60947-5-1
Electrical durability1000000 cycles, AC-15, 2 A at 230 V, operating rate
Mounting of blockFront mounting
Electrical composition codeC1 (quantity
Device presentationBasic element
Contractual warranty
Warranty (in months)18
Environment
Protective treatmentTH
Ambient air temperature for storage-40…70 °C
Ambient air temperature for operation-40…70 °C
StandardsIEC 60947-5-1; CSA C22.2 No 14; JIS C8201-5-1; IEC 60947-1; UL 508; IEC 60947-5-4; JIS C8201-1
Product certificationsCSA; GOST; BV; DNV; LROS (Lloyds register of shipping); CCC; UL
Vibration resistance5 gn (f= 2…500 Hz) conforming to IEC 60068-2-6
Shock resistance30 gn (duration = 18 ms) for half sine wave acceleration conforming to IEC 60068-2-27; 50 gn (duration = 11 ms) for half sine wave acceleration conforming to IEC 60068-2-27
Logistical informations
Country of originFR
Main
Range of productHarmony XB4; Harmony XB5
Product or component typeContact block
Device short nameZBE
Sale per indivisible quantity5
IP degree of protectionIP20 conforming to IEC 60529
Contact operationSlow-break
Contact block typeSingle
Contacts usageStandard contacts
Connections - terminalsScrew clamp terminals, = 1 x 0.22 mm² without cable end conforming to IEC 60947-1
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height5.500 cm
Package 1 Width3.400 cm
Package 1 Length5.400 cm
Package 1 Weight9.000 g
Unit Type of Package 2BB1
Number of Units in Package 25
Package 2 Height5.600 cm
Package 2 Width4.300 cm
Package 2 Length5.400 cm
Package 2 Weight52.000 g
Unit Type of Package 3S03
Number of Units in Package 3800
Package 3 Height30.000 cm
Package 3 Width30.000 cm
Package 3 Length40.000 cm
Package 3 Weight8.757 kg
The ZBE102 is an auxiliary switch block of the Harmony XB4 and XB5 series from Schneider Electric, designed for use in industrial and building automation applications. As a contact block with one normally open contact, it serves for signal transmission or controlling switching operations in electrical circuits. It is modular in design and can be mounted on pushbuttons, indicator lights, or selector switches with 22 mm or 30 mm mounting dimensions, enabling flexible and individual device configuration. Front mounting is achieved by snap-fitting onto a mounting flange, while the rear side features screw terminals for electrical connection.

Auxiliary switches are commonly used in electrical installations as auxiliary contacts in control panels to transmit status information or to implement additional switching functions. The ZBE102 is designed as a simple contact block containing a normally open contact that breaks the electrical connection when actuated. The contacts are made of silver alloy (Ag/Ni), ensuring high conductivity and resistance to wear and oxidation. The positive opening in accordance with IEC 60947-5-1, Annex K, ensures reliable contact opening without contact breakage or unintended short circuits.

Technology explained clearly: The contact block features an operating stroke of 1.5 mm under alternating electrical conditions and a total stroke of 4.3 mm. The actuation force is 2 N, enabling precise and energy-efficient operation. The screw terminals are rated for a cross-section of 0.22 mm² and comply with IEC 60947-1. The tightening torque ranges from 0.8 to 1.2 Nm, with screw head types compatible with No. 1 Phillips and flat screwdrivers with Ø 4 mm and Ø 5.5 mm. The mechanical life is 10,000,000 cycles, and the electrical life is 1,000,000 cycles under AC-15, 2 A at 230 V and operating speed.

Compatibility and accessories: The ZBE102 is compatible with the Harmony XB4 (metal) and XB5 (plastic) series. Suitable accessories include the mounting key ZB5AZ905, the auxiliary switch block ZBE1025, the mounting flange ZB5AZ009, and the device carrier ZB4BZ009. These components enable modular expansion of control devices and application-specific adaptation.

Mounting and installation: Mounting is done by snap-fitting onto the mounting flange of the main device. The screw terminals on the rear side serve for electrical connection. The protection rating IP20 corresponds to IEC 60529 and protects against finger contact, but not against dust or water. The operating temperature ranges from -40 °C to +70 °C, as does the storage temperature. Vibration resistance is 5 gn at a frequency of 2 to 500 Hz, and shock resistance is 30 gn (18 ms) and 50 gn (11 ms) according to IEC 60068-2-6 and -2-27.

Operational advantages: The ZBE102 is designed for use in industrial environments where high mechanical loads and vibration stresses occur. The rated insulation voltage is 600 V (pollution degree 3), and the rated impulse voltage withstand is 6 kV. The rated operating currents range from 0.1 A to 6 A depending on switching type and voltage. The conventional thermal current is 10 A in free air. Certifications include IEC 60947-5-1, CSA C22.2 No. 14, UL 508, JIS C8201-5-1, and others, ensuring international usability. The Green Premium environmental label provides access to information on material contents and environmental impacts.

Standards and certifications: The devices comply with standards IEC 60947-5-1, IEC 60947-1, UL 508, CSA C22.2 No. 14, JIS C8201-5-1, and JIS C8201-1. Product certifications include CSA, GOST, BV, DNV, LROS, CCC, and UL. The protection rating IP20 offers protection against finger contact, but not against dust or water. The operating temperature ranges from -40 °C to +70 °C, as does the storage temperature. Vibration resistance is 5 gn at a frequency of 2 to 500 Hz, and shock resistance is 30 gn (18 ms) and 50 gn (11 ms) according to IEC 60068-2-6 and -2-27.

Functions and equipment in detail: The contact block is designed for front mounting and features screw terminals for electrical connection. The contacts are made of silver alloy, ensuring high conductivity and resistance to wear and oxidation. Positive opening ensures reliable disconnection of the electrical contact. The mechanical life is 10,000,000 cycles, and the electrical life is 1,000,000 cycles under AC-15, 2 A at 230 V and operating speed. The rated insulation voltage is 600 V (pollution degree 3), and the rated impulse voltage withstand is 6 kV. The rated operating currents range from 0.1 A to 6 A depending on switching type and voltage. The conventional thermal current is 10 A in free air. Certifications include IEC 60947-5-1, CSA C22.2 No. 14, UL 508, JIS C8201-5-1, and others, ensuring international usability. The Green Premium environmental label provides access to information on material contents and environmental impacts.

Applications: The ZBE102 is suitable for industrial applications such as machine controls, drive technology, building automation, and safety systems. Its modular design enables integration into existing control panels and adaptation to specific requirements. The high mechanical and electrical life, along with certifications for international use, make it a reliable component in demanding environments.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/418832
qrcode für Schneider Electric ZBE102 Auxiliary Switch Block 1NO Screw Terminal