Schneider Electric ZBE101, EAN: 3389110089479

Schneider Electric ZBE101 Auxiliary Switch Block 1S Screw Terminal

Industrial Material > Control devices / Pilot devices > Built-Command and signaling devices

Schneider Electric ZBE101 Auxiliary Switch Block 1S Screw Terminal

Lieske Part No. 401885
Mfg Part No ZBE101
EAN-Code 3389110089479
Manufacturer Schneider Electric
Here only 4,85 EUR
5,77 EUR incl. VAT

Further information for Schneider Electric ZBE101 Auxiliary Switch Block 1S Screw Terminal

Complementary
Net weight0.011 kg
Contacts type and composition1 NO
Positive openingWithout
Operating travel2.6 mm (NO changing electrical state); 4.3 mm (total travel)
Operating force2.3 N NO changing electrical state
Mechanical durability10000000 cycles
Tightening torque0.8…1.2 N.m conforming to IEC 60947-1
Shape of screw headCross compatible with pozidriv No 1 screwdriver; Slotted compatible with flat Ø 4 mm screwdriver; Slotted compatible with flat Ø 5.5 mm screwdriver
Contacts materialSilver alloy (Ag/Ni)
Short-circuit protection10 A cartridge fuse type gG conforming to IEC 60947-5-1
[Ith] conventional free air thermal current10 A conforming to IEC 60947-5-1
[Ui] rated insulation voltage600 V (pollution degree 3) conforming to IEC 60947-1
[Uimp] rated impulse withstand voltage6 kV conforming to IEC 60947-1
[Ie] rated operational current3 A at 240 V, AC-15, A600 conforming to IEC 60947-5-1; 6 A at 120 V, AC-15, A600 conforming to IEC 60947-5-1; 0.1 A at 600 V, DC-13, Q600 conforming to IEC 60947-5-1; 0.27 A at 250 V, DC-13, Q600 conforming to IEC 60947-5-1; 0.55 A at 125 V, DC-13, Q600 conforming to IEC 60947-5-1; 1.2 A at 600 V, AC-15, A600 conforming to IEC 60947-5-1
Electrical durability1000000 cycles, AC-15, 2 A at 230 V, operating rate
Mounting of blockFront mounting
Electrical composition codeC1 (quantity
Device presentationBasic element
Contractual warranty
Warranty (in months)18
Environment
Protective treatmentTH
Ambient air temperature for storage-40…70 °C
Ambient air temperature for operation-40…70 °C
StandardsCSA C22.2 No 14; IEC 60947-5-1; UL 508; IEC 60947-1; JIS C8201-5-1; IEC 60947-5-4; JIS C8201-1
Product certificationsCCC; UL; DNV; GOST; LROS (Lloyds register of shipping); BV; CSA
Vibration resistance5 gn (f= 2…500 Hz) conforming to IEC 60068-2-6
Shock resistance30 gn (duration = 18 ms) for half sine wave acceleration conforming to IEC 60068-2-27; 50 gn (duration = 11 ms) for half sine wave acceleration conforming to IEC 60068-2-27
Logistical informations
Country of originFR
Main
Range of productHarmony XB5; Harmony XB4
Product or component typeContact block
Device short nameZBE
Sale per indivisible quantity5
IP degree of protectionIP20 conforming to IEC 60529
Contact operationSlow-break
Contact block typeSingle
Contacts usageStandard contacts
Connections - terminalsScrew clamp terminals, = 1 x 0.22 mm² without cable end conforming to IEC 60947-1
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height1.000 cm
Package 1 Width2.500 cm
Package 1 Length3.000 cm
Package 1 Weight9.000 g
Unit Type of Package 2BB1
Number of Units in Package 25
Package 2 Height4.500 cm
Package 2 Width5.500 cm
Package 2 Length5.500 cm
Package 2 Weight52.000 g
Unit Type of Package 3S03
Number of Units in Package 3800
Package 3 Height30.000 cm
Package 3 Width30.000 cm
Package 3 Length40.000 cm
Package 3 Weight8.691 kg
Schneider Electric auxiliary switch block ZBE101, part of the Harmony XB4 and XB5 series, designed for use in industrial control and switching installations. As a contact block with one normally open (NO) contact, it serves for signal transmission or controlling auxiliary functions in electrical circuits. It is designed for mounting on 22 mm mounting flanges, enabling modular expansion of pushbuttons, indicator lights, and other control devices. Front mounting is achieved by snap-in, ensuring a mechanically stable and vibration-resistant connection. The switch is suitable for use in metal and plastic programs and features screw terminals for electrical connections.

Applications
The ZBE101 is suitable for applications in industrial automation, building technology, and switching installations where reliable and robust auxiliary switch functionality is required. It is particularly suited for environments with mechanical stress, as it features high vibration resistance of 5 gn in the frequency range of 2 to 500 Hz, as well as shock resistance of 30 gn (18 ms) and 50 gn (11 ms). The operating temperature ranges from -40 °C to +70 °C, making it suitable for use in climatically diverse regions.

Functions and Equipment in Detail
The contact block features a single NO contact that switches in stages. The actuation force is 2.3 N, with an operating stroke of 2.6 mm (changing electrical state) and a total stroke of 4.3 mm. The contacts are made of a silver alloy (Ag/Ni), ensuring high electrical conductivity and corrosion resistance. The screw terminals allow secure connection of cables with a cross-section from 0.22 mm² without wire end ferrules. The tightening torques range from 0.8 to 1.2 Nm, with screw heads compatible with No. 1 Phillips screwdrivers and flat screwdrivers with Ø 4 mm and Ø 5.5 mm.

Technology Explained Simply
The ZBE101 is a mechanical contact block that closes an electrical contact when actuated. The switching function operates in stages, meaning the contact does not close immediately but after a defined actuation movement. The mechanical life is 10,000,000 cycles, ensuring high reliability over long operating periods. The electrical life is 1,000,000 cycles under AC-15 operation with 2 A at 230 V. The rated insulation voltage is 600 V (pollution degree 3), and the rated impulse voltage withstand is 6 kV. The conventional thermal current rating is 10 A in free air. The rated operating currents depend on voltage and load type (AC-15 or DC-13) and range from 0.1 A at 600 V DC to 6 A at 120 V AC.

Compatibility and Accessories
The ZBE101 is compatible with Harmony XB4 (metal) and XB5 (plastic) series and can be mounted on 22 mm mounting flanges. Suitable accessories include mounting flange ZB5AZ009, mounting key ZB5AZ905, auxiliary switch block ZBE1015 (spring return), and device carrier ZB4BZ009. These components enable flexible and modular adaptation to existing control devices and system configurations.

Mounting and Installation
Mounting is done by snapping the contact block onto the corresponding mounting flange. The electrical connection is made via the screw terminals on the rear. The screw terminals are designed for cable cross-sections from 0.22 mm². Mounting is done in front position, with mechanical stability ensured by the snap-in connection. The ambient temperature for operation and storage is between -40 °C and +70 °C.

Operational Advantages
The ZBE101 is characterized by high mechanical and electrical life, making it suitable for long-term applications. Its robust construction and certifications according to IEC 60947-5-1, UL 508, CSA C22.2 No. 14, and other international standards enable use in global markets. The protection rating IP20 protects against finger contact and solid foreign objects, but is not waterproof. Certifications include CCC, UL, DNV, GOST, LROS, and BV, ensuring international usability. Product certifications and standards guarantee compliance with safety and quality requirements.

The item is supplied in a packaging unit of 5 pieces (VPE 5), with the individual packaging (PCE) containing one device. Packaging unit BB1 includes 5 pieces and is designed for shipping and storage. Packaging unit S03 includes 800 pieces and is intended for bulk distribution. The warranty period is 18 months.

Protection rating IP20 corresponds to IEC 60529 and protects against finger contact and solid foreign objects, but is not waterproof. The rated insulation voltage of 600 V (pollution degree 3) and the rated impulse voltage withstand of 6 kV ensure electrical safety. The contact material silver alloy (Ag/Ni) ensures high conductivity and longevity. The standards IEC 60947-5-1, UL 508, CSA C22.2 No. 14, and others ensure international usability. The certifications CCC, UL, DNV, GOST, LROS, BV, and CSA confirm compliance with international requirements.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/401885
qrcode für Schneider Electric ZBE101 Auxiliary Switch Block 1S Screw Terminal