Schneider Electric XPSUEP34AC, EAN: 3606489601782

Schneider Electric XPSUEP34AC safety relay 4S 2Ö 48-240V

Schneider Electric XPSUEP34AC safety relay 4S 2Ö 48-240V

Lieske Part No. 1861724
Mfg Part No XPSUEP34AC
EAN-Code 3606489601782
Manufacturer Schneider Electric
Here only 183,35 EUR
218,19 EUR incl. VAT

Further information for Schneider Electric XPSUEP34AC safety relay 4S 2Ö 48-240V

Complementary
Power consumption in W2 W 48 V DC
Power consumption in VA6.5 VA 240 V AC 50/60 Hz
Input protection typeInternal, electronic
safety outputs4 NO redundant; 2 NC single
safety inputs0 extension bus 24 V DC 5 mA
Maximum line resistance60 Ohm
Input compatibilityNormally closed circuit conforming to ISO 14119; XC limit switch conforming to ISO 14119; Mechanical contact conforming to ISO 14119; Normally closed circuit conforming to ISO 13850; Antivalent pair conforming to ISO 14119; OSSD pair conforming to IEC 61496-1-2; 3-wire proximity sensors PNP
[Ie] rated operational current5 A AC-1 for normally open relay contact; 3 A AC-15 for normally open relay contact; 5 A DC-1 for normally open relay contact; 3 A DC-13 for normally open relay contact
[Ith] conventional free air thermal current8 A
Associated fuse rating10 A gG for NO relay output circuit conforming to IEC 60947-1; 4 A gG for NC relay output circuit conforming to IEC 60947-1
Minimum output current10 mA for relay output
Minimum output voltage12 V for relay output
Maximum response time on input open20 ms
[Ui] rated insulation voltage250 V (pollution degree 2) conforming to IEC 60947-1
[Uimp] rated impulse withstand voltage4 kV overvoltage category II conforming to IEC 60947-1
Local signallingLED (green) for power ON; LED (red) for error; LED (yellow) for safety output status
Mounting support35 mm symmetrical DIN rail
Depth120 mm
Height100 mm
Width22.5 mm
Net weight0.200 kg
Contractual warranty
Warranty (in months)18
Environment
StandardsIEC 60947-5-1; IEC 61508-1 functional safety standard; IEC 61508-2 functional safety standard; IEC 61508-3 functional safety standard; IEC 61508-4 functional safety standard; IEC 61508-5 functional safety standard; IEC 61508-6 functional safety standard; IEC 61508-7 functional safety standard; ISO 13849-1 functional safety standard; IEC 62061 functional safety standard
Product certificationsTÜV; cULus
IP degree of protectionIP20 (terminals) conforming to IEC 60529; IP40 (housing) conforming to IEC 60529; IP54 (mounting area) conforming to IEC 60529
Ambient air temperature for storage-25…85 °C
Relative humidity5…95 % non-condensing
Logistical informations
Country of originID
Main
Range of productHarmony Safety Automation
Product or component typeSafety module
Safety module nameXPSUEP
Safety module applicationFor extending number of safety contacts
Function of moduleSafety output extension
Safety levelCan reach PL e/category 4 for normally open relay contact conforming to ISO 13849-1; Can reach SILCL 3 for normally open relay contact conforming to IEC 62061; Can reach SIL 3 for normally open relay contact conforming to IEC 61508; Can reach PL c/category 1 for normally closed relay contact conforming to ISO 13849-1; Can reach SILCL 1 for normally closed relay contact conforming to IEC 62061; Can reach SIL 1 for normally closed relay contact conforming to IEC 61508
Safety reliability dataMTTFd > 30 years conforming to ISO 13849-1; Dcavg >= 99 % conforming to ISO 13849-1; PFHd = 1.61E-09 conforming to ISO 13849-1; HFT = 1 conforming to IEC 62061; PFHd = 1.61E-09 conforming to IEC 62061; SFF > 99% conforming to IEC 62061; HFT = 1 conforming to IEC 61508-1; PFHd = 1.61E-09 conforming to IEC 61508-1; SFF > 99% conforming to IEC 61508-1; Type = B conforming to IEC 61508-1
Electrical circuit typeAddition to Preventa XPSU base module
Connections - terminalsRemovable spring terminal block, 0.2...2.5 mm² solid or flexible; Removable spring terminal block, 0.25...2.5 mm² flexible with ferrule single conductor; Removable spring terminal block, 0.2...1.5 mm² solid or flexible twin conductor; Removable spring terminal block, 2 x 0.25...1 mm² flexible with ferrule without cable end, with bezel; Removable spring terminal block, 2 x 0.5...1.5 mm² flexible with ferrule with cable end, with bezel
[Us] rated supply voltage48...240 V AC/DC - 10...10 %
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height6.800 cm
Package 1 Width14.000 cm
Package 1 Length15.800 cm
Package 1 Weight303.000 g
Unit Type of Package 2S03
Number of Units in Package 26
Package 2 Height30.000 cm
Package 2 Width30.000 cm
Package 2 Length40.000 cm
Package 2 Weight2.584 kg
The Harmony XPS Universal safety relays are ideal for use in a variety of safety applications thanks to their selectable safety function and start option using rotary switches on the front. This reduces the number of variants of the devices you need, and the diagnostic function allows states to be easily transferred to a PLC, so that in the event of a fault, downtime is reduced by clear error information. The side connector for connecting to the XPSU safety relay enables direct operation without separate wiring of the control. This relay extension has 4 safe relay normally open contacts and 2 normally closed contacts as outputs. The supply voltage is 48-240 VAC/DC and the connections are made via removable spring-loaded terminals. Installation is done by snapping onto a top-hat rail or screwing onto mounting plates. A uniquely numbered locking band is included to protect the settings under the transparent cover. A wide range of approvals enable international use. Thanks to the Green Premium environmental label, you can receive detailed information on material content, environmental impact and circular economy that supports your sustainability goals.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1861724
qrcode für Schneider Electric XPSUEP34AC safety relay 4S 2Ö 48-240V