Schneider Electric XPSUAB31CC, EAN: 3606489601584

Schneider Electric XPSUAB31CC safety relay 48-240V

Schneider Electric XPSUAB31CC safety relay 48-240V

Lieske Part No. 1861677
Mfg Part No XPSUAB31CC
EAN-Code 3606489601584
Manufacturer Schneider Electric
Here only 135,38 EUR
161,10 EUR incl. VAT

Further information for Schneider Electric XPSUAB31CC safety relay 48-240V

Complementary
Synchronisation time between inputs0.5 s; 2.2 s
Type of startAutomatic/manual/monitored
Power consumption in W2.0 W 48 V DC
Power consumption in VA6.5 VA 240 V AC 50/60 Hz
Input protection typeInternal, electronic
safety outputs1 C/O
safety inputs1 safety input 24 V DC 5 mA
maximum wire resistance500 Ohm
Input compatibilityNormally closed circuit conforming to ISO 14119; XC limit switch conforming to ISO 14119; Mechanical contact conforming to ISO 14119; Normally closed circuit conforming to ISO 13850; Antivalent pair conforming to ISO 14119; OSSD pair conforming to IEC 61496-1-2; Two-hand control conforming to EN 574/ISO 13851-III A; 3-wire proximity sensors PNP
[Ie] rated operational current5 A AC-1 for normally open relay contact; 3 A AC-15 for normally open relay contact; 5 A DC-1 for normally open relay contact; 3 A DC-13 for normally open relay contact; 3 A AC-1 for normally closed relay contact; 1 A AC-15 for normally closed relay contact; 2 A DC-1 for normally closed relay contact; 1 A DC-13 for normally closed relay contact
Control Outputs2 on/off configurable pulsed output
Input/output typeSemiconductor pulsed diagnostic output 24 V DC, 20 mA Z1, not safety-related
[Ith] conventional free air thermal current3 A
Associated fuse rating6 A gG for relay output conforming to IEC 60947-1
Minimum output current10 mA for relay output
Minimum output voltage15 V for relay output
Maximum response time on input open20 ms
[Ui] rated insulation voltage250 V (pollution degree 2) conforming to IEC 60947-1
[Uimp] rated impulse withstand voltage4 kV overvoltage category II conforming to IEC 60947-1
Local signallingLED (green) for power ON; LED (red) for error; LED (yellow) for start; LED (yellow) for safety status; LED (yellow) for safety input S12; LED (yellow) for safety input S13
Mounting support35 mm symmetrical DIN rail
Depth120 mm
Ambient air temperature for operation-25…55 °C
Height100 mm
Width22.5 mm
Net weight0.200 kg
Contractual warranty
Warranty (in months)18
Environment
StandardsIEC 60947-5-1; IEC 61508-1 functional safety standard; IEC 61508-2 functional safety standard; IEC 61508-3 functional safety standard; IEC 61508-4 functional safety standard; IEC 61508-5 functional safety standard; IEC 61508-6 functional safety standard; IEC 61508-7 functional safety standard; ISO 13849-1 functional safety standard; IEC 62061 functional safety standard
Product certificationsTÜV; cULus
IP degree of protectionIP20 (terminals) conforming to IEC 60529; IP40 (housing) conforming to IEC 60529; IP54 (mounting area) conforming to IEC 60529
Relative humidity5…95 % non-condensing
Logistical informations
Country of originID
Main
Range of productHarmony Safety Automation
Product or component typeSafety module
Safety module nameXPSUAB
Safety module applicationFor electrical monitoring of two-hand control stations; For application with safety switchover contact; For emergency stop, guard and light curtain monitoring; Monitoring antivalent contacts
Function of moduleEmergency stop monitoring 1-channel wiring; Guard monitoring 1-channel wiring; Monitoring 1 PNP sensor; Monitoring two-hand control station type IIIA; Magnetic switch monitoring; Light curtain monitoring; RFID switch; Monitoring of electro-sensitive protection equipment (ESPE); Proximity sensor monitoring
Safety levelCan reach PL = c conforming to ISO 13849-1; Can reach SILCL 1 conforming to IEC 62061; Can reach SIL 1 conforming to IEC 61508
Safety reliability dataMTTFd >= 30 years conforming to ISO 13849-1; Dcavg < 60 % conforming to ISO 13849-1; PFHd = 1177E-09 1/h conforming to ISO 13849-1; HFT = 0 conforming to IEC 62061; PFHd = 1177E-09 1/h conforming to IEC 62061; SFF > 60% conforming to IEC 62061; HFT=0 conforming to IEC 61508-1; PFHd = 1177E-09 1/h conforming to IEC 61508-1; SFF > 60% conforming to IEC 61508-1; Type = B conforming to IEC 61508-1
Electrical circuit typeNC pair; PNP pair; Antivalent pair; OSSD pair
Connections - terminalsRemovable spring terminal block, 0.2...2.5 mm² solid or flexible; Removable spring terminal block, 0.25...2.5 mm² flexible with ferrule single conductor; Removable spring terminal block, 0.2...1.5 mm² solid or flexible twin conductor; Removable spring terminal block, 2 x 0.25...1 mm² flexible with ferrule without cable end, with bezel; Removable spring terminal block, 2 x 0.5...1.5 mm² flexible with ferrule with cable end, with bezel
[Us] rated supply voltage48...240 V AC/DC - 10...10 %
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height6.5 cm
Package 1 Width14.0 cm
Package 1 Length15.5 cm
Package 1 Weight269.0 g
Unit Type of Package 2S03
Number of Units in Package 216
Package 2 Height30 cm
Package 2 Width30 cm
Package 2 Length40 cm
Package 2 Weight5.156 kg
The Harmony XPS Universal safety relays are ideal for use in a variety of safety applications thanks to their selectable safety function and start option using rotary switches on the front. This reduces the number of variants of the devices required and the diagnostic function allows states to be easily transferred to a PLC, so that in the event of a fault, downtime is reduced by clear error information. The required function can be easily set from 6 selectable safety functions. Mechanical contacts from emergency stop/stop buttons, position switches, magnetic switches, two-hand operation type IIIA, electronic PNP sensors, light curtains or RFID safety switches with OSSD outputs can be connected to the inputs. Automatic, manual or monitored start as well as an optional start-up test are available for the start function. This safety switching device has 1 safe relay changeover contact and 1 diagnostic message as an output. With the help of the qualified diagnostics, states and errors are detected and transferred to a standard input of a PLC using a telegram via direct wiring. A ready-made function block for common control systems evaluates these messages so that the operator is fully informed on the machine display. The supply voltage is 48-240 VAC/DC and the connections are made via removable spring-loaded terminals. Applications up to safety level PL c in category 1 or SIL1 can be realized. Installation is done by snapping onto a top hat rail or screwing onto mounting plates. A uniquely numbered locking strap is included to protect the settings under the transparent cover. A wide range of approvals enable international use. Thanks to the Green Premium environmental label, you can receive detailed information on material content, environmental impact and circular economy that supports your sustainability goals.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1861677
qrcode für Schneider Electric XPSUAB31CC safety relay 48-240V