Schneider Electric XPSMCMC10804, EAN: 3606481987068

Schneider Electric XPSMCMC10804 CPU Modicon XPSMCM

Schneider Electric XPSMCMC10804 CPU Modicon XPSMCM

Lieske Part No. 594748
Mfg Part No XPSMCMC10804
EAN-Code 3606481987068
Manufacturer Schneider Electric
Here only 642,20 EUR
764,22 EUR incl. VAT

Further information for Schneider Electric XPSMCMC10804 CPU Modicon XPSMCM

Complementary
Synchronisation time between inputs< 0.5 ms
Power dissipation in W3 W
Maximum number of I/O expansion module14 with 128 discrete output(s) for input; 14 with 32.0 discrete output(s) for output
Integrated connection typeBackplane expansion bus; USB 2.0 port
Data storage equipmentSD card (optional)
Inductive load2.4 mH
Load capacitance0.82 µF
Safety levelCan reach category 4 conforming to ISO 13849-1; Can reach PL = e conforming to ISO 13849-1; Type 4 conforming to IEC 61496-1; SILCL 3 conforming to IEC 62061
Quality labelsCE
Local signalling1 LED green with PWR marking for power ON; 1 LED green with RUN marking for RUN (status); 1 LED red with E IN marking for internal error; 1 LED red with E EX marking for external error; 1 LED orange with COM marking for communication; 1 LED blue with EN marking for master enable; 8 LEDs yellow with IN marking for input status; 2 LEDs green/red with OUT marking for output status; 2 LEDs yellow with RST marking for restart signal; 2 LEDs yellow with STATUS marking for output channel
Connections - terminals2 captive screw terminals, removable terminal block; 1 captive screw terminals, removable terminal block
Mounting supportOmega 35 mm DIN rail conforming to EN 50022
Depth114.5 mm
Height99 mm
Width22.5 mm
Net weight0.155 kg
Contractual warranty
Warranty (in months)18
Environment
StandardsIEC 61496-1; ISO 13849-1; IEC 61508; IEC 61800-5-1; IEC 62061
Product certificationsTÜV; RCM; cULus
IP degree of protectionIP20
Ambient air temperature for operation-10…55 °C
Ambient air temperature for storage-20…85 °C
Relative humidity10…95 %
Pollution degree2
[Uimp] rated impulse withstand voltage4 kV conforming to IEC 61800-5-1
Safety reliability dataPFHd = 1.35E-8 1/h high; DC > 99 %; MTTFd < 100 years
Insulation250 V AC between power supply and housing conforming to IEC 61800-5-1
Overvoltage categoryII
Electromagnetic compatibilityElectrostatic discharge immunity test - test level: 6 kV (on contact) conforming to IEC 61000-4-2; Electrostatic discharge immunity test - test level: 20 kV (on air) conforming to IEC 61000-4-2; Susceptibility to electromagnetic fields - test level: 10 V/m (80...1000 MHz) conforming to IEC 61000-4-3; Susceptibility to electromagnetic fields - test level: 30 V/m (1.4 GHz...2 GHz) conforming to IEC 61000-4-3
Vibration resistance+/-0.35 mm (f= 10…55 Hz) conforming to IEC 61496-1
Shock resistance10 gn (duration = 16 ms) for 1000 shocks on each axis conforming to IEC 61496-1
service life20 year(s)
Logistical informations
Country of originIT
Main
Range of productModicon Safety automation
Device short nameXPSMCM
Electrical connectionScrew terminal
Product or component typeSafety controller CPU
[Us] rated supply voltage24 V - 20...20 % DC
Number of inputs8 digital for input connection; 4 digital for interlock start/restart or external device monitoring
Number of outputs4 safety outputs OSSD for contactor/drive connection; 4 test for line control outputs; 4 configurable for diagnostic connection
Discrete input voltage24 V
Discrete output current400 mA
Discrete input current400 mA
Discrete input typeSafety input; PNP
Discrete output typePNP
Backplane connectorWithout
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height4.500 cm
Package 1 Width12.600 cm
Package 1 Length16.500 cm
Package 1 Weight262.000 g
Unit Type of Package 2S03
Number of Units in Package 226
Package 2 Height30.000 cm
Package 2 Width30.000 cm
Package 2 Length40.000 cm
Package 2 Weight8.891 kg
The Safety Controller CPU XPSMCMC10804 from Schneider Electric is the base module of the Modicon safety automation series and serves as the central unit for processing configured safety functions in machine and plant control systems. As a modular safety controller, it enables flexible system expansion according to requirements, while the CPU itself is designed for stand-alone applications without planned extensions. The operating voltage is 24 V DC with a tolerance of ±20 %, ensuring stable power supply in industrial environments. Electrical connections are made via removable screw terminals, ensuring secure and reliable connections. Mounting is done on an Omega 35 mm DIN rail in accordance with EN 50022, enabling standardized installation in enclosures.

Applications
The XPSMCMC10804 is intended for use in industrial safety applications, particularly in machine building, material handling technology, and automation systems where high safety integrity is required. It is suitable for installations requiring monitoring and control of safe input and output connections, such as emergency stop switches, light curtains, or interlocks. The CPU is designed for operation in environments with temperatures ranging from -10 °C to 55 °C, with storage up to 85 °C. Relative humidity may range between 10 % and 95 %, with a pollution degree of 2. The protection rating IP20 protects against contact with fingers and against solid foreign objects, but not against water or dust — therefore, the installation environment must be appropriately dry and dust-free.

Functions and Equipment in Detail
The CPU features 8 safe digital inputs for connecting to safety components, as well as 4 digital inputs for start/restart of interlocks or external monitoring. On the output side, there are 4 safe OSSD outputs (Safe Output Signal Device) available, which can be directly connected to contactors or drives. Additionally, there are 4 test outputs for cable monitoring and 4 configurable outputs for diagnostic connections. The discrete inputs and outputs operate at 24 V with a current of 400 mA, with the input type being PNP. The synchronization time between inputs is less than 0.5 ms, ensuring rapid response to safety events. The integrated USB 2.0 interface enables configuration via the free software SoSafe Configurable from Schneider Electric, allowing programming and diagnostics directly from a PC.

Technology Explained Simply
The CPU is designed for operation in safety-critical applications and achieves a safety level PL = e in Category 4 according to ISO 13849-1, representing the highest requirement for safety functions in the machine building industry. Additionally, it complies with Type 4 according to IEC 61496-1 and SILCL 3 according to IEC 62061, emphasizing reliability and fault-free operation. Reliability values include a PFHd of 1.35E-8 1/h, Diagnostics Coverage (DC) > 99 %, and MTTFd < 100 years, indicating very high service life and low failure probability. The power dissipation is 3 W, ensuring efficient energy use. The surge voltage withstand is 4 kV in accordance with IEC 61800-5-1, and the overvoltage category is II. The insulation between power supply and housing is 250 V AC, ensuring safe isolation. Electromagnetic compatibility is tested in accordance with IEC 61000-4-2 and IEC 61000-4-3, with confirmed immunity against electrostatic discharge (6 kV contact, 20 kV air) and electromagnetic fields (10 V/m up to 1,000 MHz, 30 V/m up to 2 GHz). Vibration resistance is ±0.35 mm at 10–55 Hz, and shock resistance is 10 Gn (16 ms, 1,000 shocks per axis), demonstrating robustness under industrial conditions.

Compatibility and Accessories
The module can be combined with up to 14 expansion modules, enabling a total system of up to 128 safe inputs and 32 safe outputs. Additionally, 48 alarm outputs, speed detection, and analog value evaluation can be integrated. An optional SD card slot on the rear allows configuration storage, simplifying restoration or migration of settings. LED indicators provide status information for the system and each input and output, supporting diagnostics during operation.

Mounting and Installation
Mounting is done on an Omega 35 mm DIN rail in accordance with EN 50022, ensuring standardized and secure fastening in enclosures. Dimensions are 22.5 mm width, 99 mm height, and 114.5 mm depth, allowing integration into compact enclosures. The product weight is 0.155 kg. The service life is specified as 20 years, indicating long-term operational capability. Configuration is done via USB connection with the SoSafe Configurable software, making programming and diagnostics simple and user-friendly.

Operational Advantages
The XPSMCMC10804 offers high safety integrity with maximum levels PL e, Category 4, SILCL 3, and Type 4, making it suitable for critical applications. The modular architecture allows flexible expansion, while the CPU itself is optimized for simple, independent applications. The integrated USB interface and free configuration software simplify commissioning and maintenance. LED indicators enable quick fault detection, and the robust construction with high shock and vibration resistance ensures reliable performance in industrial environments. Compliance with standards IEC 61496-1, ISO 13849-1, IEC 61508, IEC 61800-5-1, and IEC 62061, along with certifications TÜV, RCM, and cULus, underscores the product’s quality and safety.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/594748
qrcode für Schneider Electric XPSMCMC10804 CPU Modicon XPSMCM