| Complementary |
| Synchronisation time between inputs | Depending on configuration selected |
| Power consumption in W | 12 W |
| Input protection type | External fuse 16 A |
| [Uc] control circuit voltage | 28.8 V |
| Maximum line resistance | 100 Ohm |
| Output type | 2 relays, 2 NO contacts (4 NO total) circuit(s); Solid state, 6 circuit(s), volt-free |
| Breaking capacity | 180 VA holding AC-15 C300 relay output; 1800 VA inrush AC-15 C300 relay output |
| Output thermal current | 4 A for both outputs simultaneously; 6 A for 1 output and 2 A for the other for relay output |
| [Ith] conventional free air thermal current | 16 A for relay output; 6.5 A for static output circuit |
| Associated fuse rating | 16 A gL for power supply; 4 A gL for relay output; 6 A fast blow for relay output |
| Minimum output current | 10 mA for relay output |
| Minimum output voltage | 17 V for relay output |
| Response time | Configurable : 20 ms or 30 ms with software XPSMCWIN |
| [Ui] rated insulation voltage | 300 V (pollution degree 2) conforming to IEC 60647-5-1, DIN VDE 0110 part 1 |
| [Uimp] rated impulse withstand voltage | 4 kV overvoltage category III conforming to IEC 60647-5-1, DIN VDE 0110 part 1 |
| Method of access | Slave |
| Exchange size | 14 words |
| Number of addresses | 1…127 for CANopen; 1…247 for Modbus |
| Parity | Even for Modbus; No for Modbus; Odd for Modbus |
| Data format | 1 start bit/8 data bits; 1 stop bit even or odd; 2 stop bits without parity; RTU (Remote Terminal Unit) mode |
| Supported modbus function | 01: 8-bit output data/32-bit input data; 02: 32-bit input data/8-bit output data; 03: information and errors |
| Local signalling | 48 LEDs |
| Mounting support | Mounting plate |
| Depth | 153 mm |
| Height | 151.5 mm |
| Width | 74 mm |
| Net weight | 0.84 kg |
| Contractual warranty |
| Warranty (in months) | 18 |
| Environment |
| IP degree of protection | IP20 conforming to IEC 60529 |
| Ambient air temperature for operation | -10…55 °C |
| Ambient air temperature for storage | -25…85 °C |
| Main |
| Range of product | Preventa Safety automation |
| Product or component type | Configurable safety controller |
| Safety module name | XPSMC |
| Safety use category | Category 4 maximum conforming to EN 954-1/EN/ISO 13849-1; PLE maximum conforming to ISO 13849-1; SIL 3 maximum conforming to IEC 61508 |
| Type of start | Configurable |
| Standards | IEC 60947-5-1; EN 574/ISO 13851; EN 1760-1/ISO 13856-1; IEC 61496-1; IEC 61508; EN 954-1/EN/ISO 13849-1; IEC 60204-1 |
| Product certifications | UL; TÜV; CSA |
| [Us] rated supply voltage | 24 V DC - 20...20 % |
| Number of inputs | 32 |
| Communication port protocol | CANopen with 1 SUB-D 9-pin male port(s), serial link, transmission rate: 20 kbps, 50 kbps, 125 kbps, 250 kbps, 500 kbps, 800 kbps or 1 Mbps; Modbus with 1 RJ45 port(s), serial link, transmission rate: 1200 bps, 2400 bps, 4800 bps, 9600 bps or 19200 bps |
| Safety level | Can reach PL e/category 4 conforming to EN 954-1/EN/ISO 13849-1; Can reach SIL 3 conforming to IEC 61508 |
| Packing Units |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 9.400 cm |
| Package 1 Width | 17.800 cm |
| Package 1 Length | 25.800 cm |
| Package 1 Weight | 1.285 kg |
| Unit Type of Package 2 | S04 |
| Number of Units in Package 2 | 6 |
| Package 2 Height | 30.000 cm |
| Package 2 Width | 40.000 cm |
| Package 2 Length | 60.000 cm |
| Package 2 Weight | 8.305 kg |
Preventa compact safety controller XPSMC. Compact safety controller for implementing safety applications. Controller with 32 safe digital inputs, 6 safe transistor outputs and 2x 2 safe relay outputs. Configuration by the user with XPSMCWIN software. Achievable safety level up to Cat. 4, PL e, SIL 3. Bus communication Modbus and CANopen. Please order connection terminals separately. Supply voltage 24 VDC.