Schneider Electric XPSMC16Z, EAN: 3389119010245

Schneider Electric XPSMC16Z safety controller 16 inputs

Industrial Material > Industrial relays and contactors > Safety relay

Schneider Electric XPSMC16Z safety controller 16 inputs

Lieske Part No. 627023
Mfg Part No XPSMC16Z
EAN-Code 3389119010245
Manufacturer Schneider Electric
Here only 1.373,70 EUR
1.634,70 EUR incl. VAT

Further information for Schneider Electric XPSMC16Z safety controller 16 inputs

Complementary
Synchronisation time between inputsDepending on configuration selected
Power consumption in W12 W
Input protection typeExternal fuse 16 A
[Uc] control circuit voltage28.8 V
Maximum line resistance100 Ohm
Output type2 relays, 2 NO contacts (4 NO total) circuit(s); Solid state, 6 circuit(s), volt-free
Breaking capacity180 VA holding AC-15 C300 relay output; 1800 VA inrush AC-15 C300 relay output
Output thermal current4 A for both outputs simultaneously; 6 A for 1 output and 2 A for the other for relay output
[Ith] conventional free air thermal current16 A for relay output; 6.5 A for static output circuit
Associated fuse rating16 A gL for power supply; 4 A gL for relay output; 6 A fast blow for relay output
Minimum output current10 mA for relay output
Minimum output voltage17 V for relay output
Response timeConfigurable : 20 ms or 30 ms with software XPSMCWIN
[Ui] rated insulation voltage300 V (pollution degree 2) conforming to IEC 60647-5-1, DIN VDE 0110 part 1
[Uimp] rated impulse withstand voltage4 kV overvoltage category III conforming to IEC 60647-5-1, DIN VDE 0110 part 1
Method of accessSlave
Exchange size14 words
Number of addresses1…247 for Modbus
ParityEven for Modbus; No for Modbus; Odd for Modbus
Data format1 start bit/8 data bits; 1 stop bit even or odd; 2 stop bits without parity; RTU (Remote Terminal Unit) mode
Supported modbus function01: 8-bit output data/32-bit input data; 02: 32-bit input data/8-bit output data; 03: information and errors
Local signalling30 LEDs
Mounting supportMounting plate
Depth153 mm
Height151.5 mm
Width74 mm
Net weight0.82 kg
Contractual warranty
Warranty (in months)18
Environment
IP degree of protectionIP20 conforming to IEC 60529
Ambient air temperature for operation-10…55 °C
Ambient air temperature for storage-25…85 °C
Logistical informations
Country of originFR
Main
Range of productPreventa Safety automation
Product or component typeConfigurable safety controller
Safety module nameXPSMC
Safety use categoryCategory 4 maximum conforming to EN 954-1/EN/ISO 13849-1; PLE maximum conforming to ISO 13849-1; SIL 3 maximum conforming to IEC 61508
Type of startConfigurable
StandardsEN 574/ISO 13851; EN 1760-1/ISO 13856-1; IEC 61496-1; IEC 60204-1; IEC 61508; IEC 60947-5-1; EN 954-1/EN/ISO 13849-1
Product certificationsTÜV; UL; CSA
[Us] rated supply voltage24 V DC - 20...20 %
Number of inputs16
Communication port protocolModbus with 1 RJ45 port(s), serial link, transmission rate: 1200 bps, 2400 bps, 4800 bps, 9600 bps or 19200 bps
Safety levelCan reach PL e/category 4 conforming to EN 954-1/EN/ISO 13849-1; Can reach SIL 3 conforming to IEC 61508
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height9.600 cm
Package 1 Width18.000 cm
Package 1 Length26.000 cm
Package 1 Weight1.185 kg
Unit Type of Package 2S04
Number of Units in Package 26
Package 2 Height30.000 cm
Package 2 Width40.000 cm
Package 2 Length60.000 cm
Package 2 Weight7.950 kg
The safety controller XPSMC16Z from Schneider Electric belongs to the Preventa safety technology product line and is designed as a configurable safety control system for use in industrial safety applications. The device features 16 safe digital inputs and enables the implementation of complex safety functions that can reach up to Category 4, PL e according to EN/ISO 13849-1 as well as SIL 3 according to IEC 61508. Configuration is performed using the software XPSMCWIN, allowing the user to customize the logic and response time individually. The operating voltage is 24 V DC with a tolerance range of ±20 %, enabling flexible integration into existing 24-V systems.

Applications

The XPSMC16Z is designed for use in machine and plant engineering, particularly in environments where high safety integrity is required. Typical applications include control of emergency stop circuits, safe motion sequences, protection devices for moving parts, or monitoring of safety light curtains. The Modbus communication via an RJ45 connector allows integration into higher-level control systems, with a selectable transmission rate between 1,200 and 19,200 bps. Addressing is in the range 1 to 247, enabling flexible integration into existing networks.

Functions and equipment in detail

The device features 6 safe transistor outputs that switch voltage-free, as well as 2 relay outputs with 2 NO contacts each (total 4 NO contacts). The outputs are rated for a thermal load of up to 6 A (for one output) and 4 A (for both simultaneously). The minimum output voltage is 17 V, and the minimum output current is 10 mA. The switch-off power is 180 VA (holding) and 1800 VA (inrush current) for AC-15 C300 relay outputs. The response time is configurable and is either 20 ms or 30 ms, depending on the setting selected in the XPSMCWIN software. Local signaling is provided by 30 LEDs indicating operating status, faults, and communication status.

Technology explained clearly

The safety functions of the XPSMC16Z are based on redundant processing of input signals, with the synchronization time between inputs varying according to configuration. The insulation strength is 300 V (pollution degree 2) according to IEC 60647-5-1, and the surge voltage withstand is 4 kV (overvoltage category III). The control circuit voltage is 28.8 V, and the maximum line resistance is 100 Ohm. The power consumption is 12 W. The inputs must be protected by an external fuse of 16 A. The corresponding fuses are: 16 A GL for the power supply, 4 A GL for the relay outputs, and 6 A fast-acting miniature fuse for the relay outputs.

Compatibility and accessories

Various accessories are available for extending and configuring the device. These include the configuration software XPSMCWIN, connection terminals (e.g. XPSMCTC16), connection cables (e.g. XPSMCSCY), and connector sets (e.g. XPSMCTS16). For communication, Ethernet cables SFTP (e.g. 490NTW00002) are also available. Alternatives or extensions include modular safety controllers such as the XPSMCMC10804B or expansion modules such as XPSMCMCO0000MB or XPSMCMRO0004.

Mounting and installation

The controller is mounted on a mounting plate and is designed for installation in enclosures. The protection rating IP20 according to IEC 60529 protects against finger contact and solid foreign objects, but is not suitable for outdoor use or environments with dust and splashing water. The operating temperature range is between -10 °C and 55 °C, and the storage temperature range is between -25 °C and 85 °C. Dimensions are 74 mm (width), 151.5 mm (height), and 153 mm (depth), with a product weight of 0.82 kg.

Advantages in operation

The XPSMC16Z offers high flexibility through configurable logic and modular expandability. The clear signaling via 30 LEDs simplifies diagnosis and maintenance. Modbus communication enables easy integration into existing control systems. The achievable safety levels (Category 4, PL e, SIL 3) make the device suitable for demanding applications in industrial automation. The 24 V DC operating voltage is widely used in industry, facilitating integration into existing systems. Configuration via the XPSMCWIN software allows individual adaptation to specific requirements without additional hardware changes.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/627023
qrcode für Schneider Electric XPSMC16Z safety controller 16 inputs