Schneider Electric XPSBAC34AP, EAN: 3606482034020

Schneider Electric XPSBAC34AP safety relay 1 function

Schneider Electric XPSBAC34AP safety relay 1 function

Lieske Part No. 2014497
Mfg Part No XPSBAC34AP
EAN-Code 3606482034020
Manufacturer Schneider Electric
Here only 181,45 EUR
215,93 EUR incl. VAT

Further information for Schneider Electric XPSBAC34AP safety relay 1 function

Complementary
Synchronisation time between inputsUnlimited
Type of startAutomatic/manual/monitored
Power consumption in W2.0 W 48...240 V DC
Power consumption in VA6.0 VA 48...240 V AC 50/60 Hz
Input protection typeInternal, electronic
safety outputs4 NO + 1 NC
safety inputs0
Input compatibilityNormally closed circuit conforming to ISO 14119; XC limit switch conforming to ISO 14119; Mechanical contact conforming to ISO 14119; Normally closed circuit conforming to ISO 13850
input terminalPower supply
[Ie] rated operational current5 A AC-1 for normally open relay contact; 3 A AC-15 for normally open relay contact; 5 A DC-1 for normally open relay contact; 3 A DC-13 for normally open relay contact; 3 A AC-1 for normally closed relay contact; 1 A AC-15 for normally closed relay contact; 3 A DC-1 for normally closed relay contact; 1 A DC-13 for normally closed relay contact
control outputs0
[Ith] conventional free air thermal current6 A
Associated fuse rating10 A gG for NO relay output circuit conforming to IEC 60947-1
Minimum output current10 mA for relay output
Minimum output voltage5 V for relay output
Response time60 ms at 48...240 V AC/DC
[Ui] rated insulation voltage300 V (pollution degree 2) conforming to IEC 60947-1
[Uimp] rated impulse withstand voltage4 kV overvoltage category II conforming to IEC 60947-1
Local signallingLED green with power marking for power ON; LED red with error marking for error; LED yellow with state marking for status; LED yellow with start1 marking for start input; LED yellow with start2 marking for start input
Mounting support35 mm symmetrical DIN rail
Depth120 mm
Height100 mm
Width22.5 mm
Net weight0.200 kg
Contractual warranty
Warranty (in months)18
Environment
Ambient air temperature for operation-25…55 °C
StandardsIEC 60947-5-1; IEC 61508-1 functional safety standard; IEC 61508-2 functional safety standard; IEC 61508-3 functional safety standard; IEC 61508-4 functional safety standard; IEC 61508-5 functional safety standard; IEC 61508-6 functional safety standard; IEC 61508-7 functional safety standard; ISO 13849-1 functional safety standard; IEC 62061 functional safety standard
Product certificationsTÜV; cULus
IP degree of protectionIP20 (terminals) conforming to IEC 60529; IP40 (housing) conforming to IEC 60529; IP54 (mounting area) conforming to IEC 60529
Relative humidity5…95 % non-condensing
Logistical informations
Country of originID
Main
Range of productHarmony Safety Automation
Product or component typeSafety module
Safety module nameXPSBAC
Safety module applicationFor emergency stop and protective guard applications
Function of moduleEmergency stop button with 2 NC contacts; Guard monitoring with 1 or 2 limit switches
Safety levelCan reach PL e/category 4 for normally open relay contact conforming to ISO 13849-1; Can reach SILCL 3 for normally open relay contact conforming to IEC 62061; Can reach SIL 3 for normally open relay contact conforming to IEC 61508; Can reach PL c/category 1 for normally closed relay contact conforming to ISO 13849-1; Can reach SILCL 1 for normally closed relay contact conforming to IEC 62061; Can reach SIL 1 for normally closed relay contact conforming to IEC 61508
Electrical circuit typeNC pair
Connections - terminalsRemovable screw terminal block, 0.2...2.5 mm² solid or flexible; Removable screw terminal block, 0.25...2.5 mm² flexible with ferrule single conductor; Removable screw terminal block, 0.2...1.5 mm² solid or flexible twin conductor; Removable screw terminal block, 2 x 0.25...1 mm² flexible with ferrule without cable end, with bezel; Removable screw terminal block, 2 x 0.5...1.5 mm² flexible with ferrule with cable end, with bezel
[Us] rated supply voltage48...240 V AC - 15...10 %; 48...240 V DC - 20...20 %
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height6.500 cm
Package 1 Width14.800 cm
Package 1 Length15.500 cm
Package 1 Weight306.000 g
Unit Type of Package 2S03
Number of Units in Package 216
Package 2 Height30.000 cm
Package 2 Width30.000 cm
Package 2 Length40.000 cm
Package 2 Weight5.623 kg
The Harmony XPS Basic safety relays implement basic safety functions. The focus is on classic functions and easy operation with many switching contacts. It can be operated directly without any settings and has a realizable safety function. For this purpose, the mechanical break contacts of emergency stop/stop buttons, position or cable pull switches are integrated into the supply circuit of the safety relay. This means that the safety function can be implemented in a single or two-channel (redundant) version. Automatic, manual or monitored start is available on separate inputs for the start function. This safety switching device has 4 safe relay make contacts and 2 relay break contacts as outputs. The supply voltage is 48-240 VAC/DC and the connections are made via removable screw terminals. Applications up to safety level PL e in category 4 or SIL3 can be implemented. Installation is carried out by snapping onto a top hat rail or screwing onto mounting plates. A uniquely numbered locking strap is included to protect the settings under the transparent cover. A wide range of approvals enable international use. Thanks to the Green Premium eco-label, you can receive detailed information on material content, environmental impact and circular economy that supports your sustainability goals.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/2014497
qrcode für Schneider Electric XPSBAC34AP safety relay 1 function