Schneider Electric XB7ES542P, EAN: 3389110162363

Schneider Electric XB7ES542P pushbutton 1NO 40 mm red

Industrial Material > Control devices / Pilot devices > Built-Command and signaling devices

Schneider Electric XB7ES542P pushbutton 1NO 40 mm red

Lieske Part No. 587523
Mfg Part No XB7ES542P
EAN-Code 3389110162363
Manufacturer Schneider Electric
Here only 257,35 EUR
306,25 EUR incl. VAT

Further information for Schneider Electric XB7ES542P pushbutton 1NO 40 mm red

Complementary
CAD overall width40 mm
CAD overall height40 mm
CAD overall depth72 mm
Terminals description ISO n°1(11-12)NC
Net weight0.032 kg
Device mountingFixing hole - diameter: 22.5 mm 22.3 +0.4/0 conforming to IEC 60947-1
Fixing center>= 30 x 40 mm (support panel) metal - thickness: 1…6 mm; >= 30 x 40 mm (support panel) plastic - thickness: 2…6 mm
Fixing modeFixing nut beneath head: 2…2.4 N.m
Contact operationSlow-break
Contacts usageStandard
Positive openingWith conforming to IEC 60947-5-1 appendix K
Mechanical durability10000 cycles
Tightening torque0.8…1.2 N.m conforming to IEC 60947-1
Shape of screw headCross compatible with JIS No 1 screwdriver; Cross compatible with Philips no 1 screwdriver; Cross compatible with pozidriv No 1 screwdriver; Slotted compatible with flat Ø 4 mm screwdriver; Slotted compatible with flat Ø 5.5 mm screwdriver
Short-circuit protection4 A cartridge fuse type gG conforming to IEC 60947-5-1
[Ui] rated insulation voltage250 V (pollution degree 3) conforming to IEC 60947-1
[Uimp] rated impulse withstand voltage4 kV conforming to IEC 60947-1
[Ie] rated operational current0.1 A at 250 V, DC-13, R300 conforming to IEC 60947-5-1; 0.22 A at 125 V, DC-13, R300 conforming to IEC 60947-5-1; 0.3 A at 240 V, AC-14, D300 conforming to IEC 60947-5-1; 0.6 A at 120 V, AC-14, D300 conforming to IEC 60947-5-1
Electrical durability1000000 cycles, DC-13, 0.3 A at 24 V, operating rate
Electrical reliabilityΛ < 10exp(-6) at 17 V and 5 mA conforming to IEC 60947-5-4
Contractual warranty
Warranty (in months)18
Environment
Protective treatmentTH
Ambient air temperature for storage-40…70 °C
Ambient air temperature for operation-25…70 °C
Electrical shock protection classClass II conforming to IEC 60536
IP degree of protectionIP20 (rear face) conforming to IEC 60529; IP54 (front face) conforming to IEC 60529
Enclosure TypeUL type 12
StandardsIEC 60947-5-1; UL 508; IEC 60947-1; CSA C22.2 No 14; IEC 60364-5-53
Product certificationsCCC
Vibration resistance5 gn (f= 2…500 Hz) conforming to IEC 60068-2-6
Shock resistance10 gn (duration = 11 ms) for half sine wave acceleration conforming to IEC 60068-2-27
Logistical informations
Country of originID
Main
Range of productHarmony XB7
Product or component typeEmergency switching off monolithic push-button
Device short nameXB7
Mounting diameter22 mm
Sale per indivisible quantity10
Shape of signaling unit headRound
Type of operatormechanical latching
ResetTurn to release
Operator profileRed mushroom Ø 40 mm, unmarked
Contacts type and composition1 NC
Connections - terminalsScrew clamp terminals
Device presentationMonolithic product
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height4.0 cm
Package 1 Width15.0 cm
Package 1 Length20.0 cm
Package 1 Weight38.0 g
Unit Type of Package 2S02
Number of Units in Package 2100
Package 2 Height15 cm
Package 2 Width30 cm
Package 2 Length40 cm
Package 2 Weight7.4 kg
Unit Type of Package 3P06
Number of Units in Package 31600
Package 3 Height70.000 cm
Package 3 Width60.000 cm
Package 3 Length80.000 cm
Package 3 Weight102.4 kg
The XB7ES542P emergency stop pushbutton from the Harmony XB7 series by Schneider Electric is an industrial command switch in monoblock design, specifically designed for use in machine building, enclosure construction, and industrial applications. The device features a red mushroom head with a diameter of 40 mm, ergonomically shaped to enable comfortable operation. Mounting is performed into a hole with a diameter of 22 mm, with fastening achieved via a nut under the head at a tightening torque of 2 to 2.4 Nm. The pushbutton is reset by rotation locking, ensuring a secure and mechanically latched position.

Emergency Stop Function
This pushbutton serves as an emergency stop switch and is equipped with a normally closed (NC) contact that interrupts the circuit when actuated. The contacts are designed for staged switching and are intended for standard applications. The positive opening complies with the requirements of IEC 60947-5-1, Annex K, ensuring safe and reliable switching performance even under critical conditions. The electrical life is rated at 1,000,000 cycles under a service load of 0.3 A at 24 V DC-13, indicating high load capacity and durability.

Technology and Equipment
Connections are made via screw terminals on the rear of the device. The terminals are compatible with screwdrivers of types JIS No. 1, Phillips No. 1, Position No. 1, as well as flat screwdrivers with Ø 4 mm and Ø 5.5 mm. The tightening torque for the terminals is 0.8 to 1.2 Nm. The rated insulation voltage is 250 V at pollution degree 3, and the rated impulse voltage withstand is 4 kV. The rated operational currents are defined for various load types: 0.1 A at 250 V DC-13, 0.22 A at 125 V DC-13, 0.3 A at 240 V AC-14, and 0.6 A at 120 V AC-14.

Protection and Reliability
The device is rated IP54 on the front and IP20 on the rear according to IEC 60529, making it suitable for use in environments with limited protection requirements. The protection class against electric shock is Class II, providing additional safety. Vibration resistance is 5 gn in the frequency range of 2 to 500 Hz, and shock resistance is 10 Gn for a sinusoidal half-wave acceleration with a duration of 11 ms. The operating temperature range is -25 °C to 70 °C, and the storage temperature range is -40 °C to 70 °C.

Compatibility and Standards
The pushbutton complies with standards IEC 60947-5-1, UL 508, IEC 60947-1, CSA C22.2 No. 14, and IEC 60364-5-53. Product certification includes CCC. The housing variant is designed for mounting in metal and plastic carrier plates, which must have a minimum thickness of 1 to 6 mm (metal) or 2 to 6 mm (plastic). The mounting center must be at least 30 x 40 mm.

Application and Advantages
The XB7ES542P is designed for universal use in industrial installations where a safe and reliable emergency stop function is required. The monoblock design simplifies installation and reduces space requirements. The high electrical life and mechanical life of 10,000 cycles ensure long-term operational durability. The use of plastic materials and compliance with Green Premium guidelines support sustainability goals through transparent information on material content and environmental impact. The wide range of certifications enables use in international markets.

Accessories
Additional components from the Harmony XB7 series are compatible with this device, such as the XB7NS8442 (emergency stop switch, 1NC, red, D22 mm, mushroom head Ø40 mm) or the XB7ES545P (mushroom pushbutton, 1NO1NC, red, D22 mm, rotation locking). These allow for flexible expansion and adaptation to specific requirements in enclosure construction.

Functions and Equipment in Detail
The pushbutton is equipped with a mechanical locking mechanism enabling rotation locking. The contacts are configured as normally closed (NC) and designed for staged switching. The screw terminals are designed for secure and durable connections. The IP protection rating of IP54 on the front protects against dust and splashing water, while IP20 on the rear provides limited protection. The operating temperature ranges and shock and vibration resistance make the device suitable for industrial applications.

Mounting and Installation
Mounting is performed into a hole with a diameter of 22 mm. Fastening is achieved via a nut under the head at a tightening torque of 2 to 2.4 Nm. The carrier plate must be at least 30 x 40 mm in size and have a thickness of 1 to 6 mm (metal) or 2 to 6 mm (plastic). Connections are made via screw terminals on the rear, with a tightening torque of 0.8 to 1.2 Nm for the terminals. The terminals are compatible with various screwdriver types.

Operational Advantages
The XB7ES542P offers high reliability due to its long electrical life and mechanical robustness. The rotation locking ensures a secure reset. The IP54 protection rating on the front protects against environmental conditions. Compliance with international standards and certifications enables use in various markets. The monoblock design reduces installation effort and space requirements in enclosures. The Green Premium certification supports sustainability goals through transparent information on materials and environmental impact.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/587523
qrcode für Schneider Electric XB7ES542P pushbutton 1NO 40 mm red