| Complementary |
| Mounting location | Left; Right |
| [Ue] rated operational voltage | 690 V AC 50/60 Hz |
| [Uimp] rated impulse withstand voltage | 8 kV |
| [Ith] conventional free air thermal current | 12 A |
| [Ithe] conventional enclosed thermal current | 10 A |
| Mechanical durability | 100000 cycles |
| Electrical durability | 30000 cycles DC-11; 100000 cycles AC-15 |
| Connections - terminals | Screw clamp terminals 2 cable(s) 0.75…1.5 mm² - flexible - with cable end; Screw clamp terminals 2 cable(s) 1…2.5 mm² - solid |
| Tightening torque | 0.7 N.m - on screw clamp terminals |
| Height | 65 mm |
| Width | 20 mm |
| Depth | 48.5 mm |
| Net weight | 0.05 kg |
| Contractual warranty |
| Warranty (in months) | 18 |
| Environment |
| Standards | IEC 60947-5 |
| Product certifications | GL; CSA; UL; UKCA |
| Protective treatment | TC |
| IP degree of protection | IP20 conforming to IEC 60529 |
| Ambient air temperature for operation | -20…50 °C |
| Fire resistance | 960 °C conforming to IEC 60695-2-1 |
| Logistical informations |
| Country of origin | CZ |
| Main |
| Range | TeSys |
| Device short name | VZ |
| Product or component type | Auxiliary contact block |
| Performance level | High performance |
| Contacts type and composition | 1 NO + 1 NC |
| Contact operation | Late-make 1 NO; Early-break 1 NC |
| Product compatibility | V2; V5; V02; V6; V1; V4; V01; V0; V3 |
| Network type | AC; DC |
| Network frequency | 50/60 Hz |
| Packing Units |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 5.500 cm |
| Package 1 Width | 3.700 cm |
| Package 1 Length | 9.000 cm |
| Package 1 Weight | 52.000 g |
| Unit Type of Package 2 | S02 |
| Number of Units in Package 2 | 69 |
| Package 2 Height | 15.000 cm |
| Package 2 Width | 30.000 cm |
| Package 2 Length | 40.000 cm |
| Package 2 Weight | 3.931 kg |
Schneider Electric VZ7 is an auxiliary switch block of the TeSys Vario series, specifically developed as an add-on module for various switch bodies of the V-series. It serves to extend the switching functions of main switches, disconnectors, or emergency stop switches by integrating auxiliary contacts. The module provides one close contact (S) and one open contact (Ö), with the close contact designed as a delayed (late-closing) contact and the open contact as an early-opening contact. This contact control enables precise coordination of switching operations in drive or control circuits, for example, for signal transmission to other components or for status indication.
The device is designed as an auxiliary switch block to be mounted on switch bodies of the TeSys Vario series. It features a compact design with a height of 65 mm, width of 20 mm, and depth of 48.5 mm. Mounting is performed on one side of the switch housing, with a maximum of two such modules per switch—each on the left and right side. The terminals are screw terminals, enabling connection of two cables with cross-sections of 0.75 to 1.5 mm² (flexible, with cable end ferrule) or 1 to 2.5 mm² (rigid). The required tightening torque is 0.7 Nm.
The VZ7 is intended for use in industrial control and switching installations, particularly in systems with high operating voltages. It is compatible with switch bodies V2, V5, V02, V6, V1, V4, V01, V0, and V3. The rated operating voltage is 690 V AC at 50/60 Hz, with a rated impulse voltage withstand of 8 kV. For DC applications, the module is rated up to 250 V DC and 8 A. The mechanical life is 100,000 cycles, while the electrical life is 30,000 cycles at DC-11 and 100,000 cycles at AC-15. The operating ambient temperature range is from -20 °C to +50 °C.
The contact control of the VZ7 is designed such that the close contact (NO) closes after the main contact (delayed), while the open contact (NC) opens before the main contact (early-opening). This enables secure signal transmission, for example, for indicating the switch status or controlling auxiliary functions. The screw terminals are designed for both flexible and rigid cables, with cable retention varying depending on cable type. The protection rating IP20 corresponds to IEC 60529 and protects against finger contact, but not against dust or water. The fire resistance is 960 °C according to IEC 60695-2-1.
The module is intended for use with various TeSys Vario switch bodies, including models V0, V1, V2, V3, V4, V5, V6, V01, and V02. It can be combined with other add-on modules such as the VZ20. Compatible switch housings and front covers include, for example, emergency stop main switches such as VCF1GE, VCF2GE, or VCF5GEN, as well as disconnectors such as VBD02 or V02. Mounting is performed directly on the switch housing, with positioning possible on the left or right side.
Mounting of the VZ7 is done on one side of the switch housing, with the screw terminals tightened to a torque of 0.7 Nm. Cable connections are made via the designated screw terminals, with maximum cross-sections of 0.75 to 2.5 mm² to be observed. The maximum number of additional auxiliary contact blocks per switch is two, one on the left and one on the right side. Installation is in accordance with standards IEC 60947-5 and certifications UL, CSA, GL, and UKCA.
The VZ7 provides a reliable and compact solution for extending switching functions in industrial installations. The high mechanical and electrical life ensures long-term operational durability. Compatibility with various switch bodies of the TeSys Vario series enables flexible integration into existing systems. Certifications according to IEC, UL, CSA, GL, and UKCA ensure compliance with international safety and quality standards. The module is RoHS- and REACH-compliant, ensuring environmental compatibility and adherence to Green Premium guidelines.