| Complementary |
| Range compatibility | Lexium 32; Altivar Machine ATV340; Altivar Process ATV900 |
| Cable length | 25 m |
| Net weight | 1.4 kg |
| Contractual warranty |
| Warranty (in months) | 18 |
| Main |
| Range of product | Lexium |
| Accessory / separate part category | Connection accessories |
| Accessory / separate part type | Encoder cable |
| Product or component type | Connecting cable |
| Device application | For creating control cordsets for SinCos Hiperface encoders |
| Accessory / separate part destination | From servo motor to servo drive |
| Cable composition | 3 x (2 x 0.14 mm²) + (2 x 0.34 mm²) |
| Packing Units |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 5.000 cm |
| Package 1 Width | 30.000 cm |
| Package 1 Length | 30.000 cm |
| Package 1 Weight | 1.625 kg |
| Unit Type of Package 2 | S04 |
| Number of Units in Package 2 | 6 |
| Package 2 Height | 30.000 cm |
| Package 2 Width | 40.000 cm |
| Package 2 Length | 60.000 cm |
| Package 2 Weight | 10.400 kg |
| Unit Type of Package 3 | P06 |
| Number of Units in Package 3 | 24 |
| Package 3 Height | 75.000 cm |
| Package 3 Width | 80.000 cm |
| Package 3 Length | 60.000 cm |
| Package 3 Weight | 49.600 kg |
The product VW3M8222R250 from Schneider Electric is a
connection cable of the
Lexium series, specifically designed for connecting
SinCos-Hiperface encoders to servo amplifiers and frequency converters. It serves as a control cable between the
servo motor and the
servo amplifier, transmitting signals for position detection and control. The cable construction is tailored to the requirements of industrial drive technology to ensure reliable and interference-free signal transmission.
Applications
This cable is intended for use in drive systems based on the
Lexium 32 series as well as the frequency converter families
Altivar Maschine ATV340 and
Altivar Prozess ATV900. These systems are used in industrial automation, particularly in machine building, material handling, and production facilities. The connection between encoder and control device is essential for precise positioning and speed control of drives.
Functions and Equipment in Detail
The cable is designed as an
encoder cable and features a specific conductor configuration: 3 x (2 x 0.14 mm²) + (2 x 0.34 mm²). This composition ensures sufficient signal integrity for the sine/cosine signals of the Hiperface encoder as well as power supply signals. The
cable length is 25 meters, which is sufficient for many industrial applications to connect the encoder on the motor to the control device in the control cabinet. The total mass of the cable is
1.4 kg, which should be considered during planning of installation and mounting.
Technology Explained Simply
The cable construction takes into account the specific requirements of Hiperface encoder technology. The three pairs, each with 0.14 mm² cross-section, are used for transmitting sine and cosine signals as well as a reference signal, which are necessary for precise position detection. The two additional conductors with 0.34 mm² cross-section are used for powering the encoder. The use of multiple conductor pairs in a shielded or screened design (not explicitly stated, but typical for encoder cables) minimizes interference from electromagnetic influences, which are common in industrial environments.
Compatibility and Accessories
The cable is compatible with the mentioned product families:
Lexium 32,
Altivar Maschine ATV340, and
Altivar Prozess ATV900. This compatibility ensures direct use without additional adapters or conversion devices. The connection is made directly from the servo motor to the servo amplifier, with signals transmitted via the cable. It is a standard accessory part, typically required during installation of drive systems.
Mounting and Installation
Installation involves connecting the cable to the encoder on the servo motor and to the corresponding terminal on the servo amplifier. Routing the 25-meter cable requires careful planning to avoid mechanical stress, bending radii, and potential interference sources. Cable routing should be done to prevent mechanical strain and to avoid signal degradation from external interference. The use of cable trays or protective sleeves may be recommended, depending on the environment.
Advantages in Operation
Using the VW3M8222R250 provides a standardized and reliable connection solution for Hiperface encoders. The predefined cable length of 25 meters allows flexible arrangement of motor and control device. The specific conductor configuration ensures high signal quality, supporting the accuracy of drive control. Compatibility with the mentioned systems reduces complexity during system integration and minimizes error sources from incorrect or incompatible cables.
The warranty period is 18 months, highlighting the product's reliability. The cable is part of the
Lexium product family and is offered as
accessory for control lines of SinCos-Hiperface encoders. No additional accessories or tools are required for installation — the connection is made directly to the designated terminals of the devices.