| Complementary |
| Electrical connection | Free end for servo drive side; Connector - Molex 4-pin for servo motor side |
| AWG gauge | 4 x 18 AWG |
| Net weight | 0.45 kg |
| Contractual warranty |
| Warranty (in months) | 18 |
| Logistical informations |
| Country of origin | TN |
| Main |
| Range of product | Lexium 28 |
| Product or component type | Power cable |
| Accessory / separate part type | Preassembled power cordset |
| Accessory / separate part category | Connection accessories |
| Product compatibility | Servo motor BCH2 at 50 W (40 mm) (without brake); Servo motor BCH2 at 100 W (40 mm) (without brake); Servo motor BCH2 at 200 W (60 mm) (without brake); Servo motor BCH2 at 400 W (60 mm) (without brake); Servo motor BCH2 at 400 W (80 mm) (without brake); Servo motor BCH2 at 750 W (80 mm) (without brake) |
| Accessory / separate part destination | Between servo motor and servo drive |
| Range compatibility | Lexium 28 |
| Cable length | 5 m |
| Packing Units |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 4.600 cm |
| Package 1 Width | 28.400 cm |
| Package 1 Length | 34.200 cm |
| Package 1 Weight | 700.000 g |
| Unit Type of Package 2 | S02 |
| Number of Units in Package 2 | 5 |
| Package 2 Height | 15.000 cm |
| Package 2 Width | 30.000 cm |
| Package 2 Length | 40.000 cm |
| Package 2 Weight | 3.816 kg |
Motor cable for connecting the Lexium servo amplifier LXM28 to the servo motor of the BCH2 series. The cable is 5.0 m long in the shielded version 4x 0.82-1.0 mm². It is intended for controlling servos without brake BCH2xxAxx. For connection to the servo amplifier LXM28, there are open cable ends and a plastic connector for the corresponding BCH2xx5x servo motor.