| Complementary |
| Electrical connection | Connector - industrial M23 for servo motor side; Free end for servo drive side |
| Net weight | 1.21 kg |
| Contractual warranty |
| Warranty (in months) | 18 |
| Logistical informations |
| Country of origin | DE |
| Main |
| Product or component type | Power cable |
| Accessory / separate part type | Preassembled power cordset |
| Accessory / separate part category | Connection accessories |
| Accessory / separate part destination | Between servo motor and servo drive |
| Range compatibility | Lexium 05; Lexium 32; Lexium 15 |
| Cable length | 5 m |
| Cable composition | 4 x 1.5 mm² + 2 x 1 mm² |
| Packing Units |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 6.000 cm |
| Package 1 Width | 27.000 cm |
| Package 1 Length | 27.000 cm |
| Package 1 Weight | 1.125 kg |
| Unit Type of Package 2 | S06 |
| Number of Units in Package 2 | 60 |
| Package 2 Height | 75.000 cm |
| Package 2 Width | 60.000 cm |
| Package 2 Length | 80.000 cm |
| Package 2 Weight | 80.200 kg |
The product VW3M5101R50 from Schneider Electric is a pre-assembled power cable, specifically designed for connecting a Lexium servo amplifier to servo motors of the BMH and BSH series. It serves as connection accessory for industrial use, particularly in drive systems, where a reliable and mechanically robust connection between drive and motor is required. The cable is 5 m in length and features a specific composition of 4 x 1.5 mm² and 2 x 1 mm², enabling the transmission of power and control signals. The construction is designed for industrial environments, with clearly defined electrical connections: on the servo motor side, a
M23 industrial connector is provided, while on the servo drive side, a
free cable end is available, requiring direct connection.
Applications
This cable is primarily intended for connecting servo motors of the BMH and BSH series with servo amplifiers from the Lexium family, particularly the models Lexium 05, Lexium 32, and Lexium 15. This combination is typical in automated production systems, material handling technology, machine building, and other areas of industrial automation, where precise motion control and high mechanical load capacity are required. The cable length of 5 m provides sufficient flexibility for most standard configurations, eliminating the need for additional extensions.
Functions and Equipment in Detail
The cable composition of 4 x 1.5 mm² and 2 x 1 mm² enables simultaneous transmission of electrical power (for motor supply) and control signals (for positioning and speed regulation). The 4 conductors with 1.5 mm² cross-section are designed for main power supply, while the two 1 mm² conductors are responsible for signal transmission. The
M23 connector on the motor side is a standardized industrial connector, ensuring a secure, dust- and moisture-resistant connection. The free end at the drive requires manual connection, with correct wire assignment according to manufacturer specifications.
Technology Explained Simply
The use of different cross-sections (1.5 mm² and 1 mm²) accounts for the differing requirements for power and signal transmission. The larger cross-sections (1.5 mm²) ensure low voltage drop and high current-carrying capacity, which is necessary for motor supply. The smaller conductors (1 mm²) are sufficient for transmitting control signals, which require lower current levels. The M23 connector is a proven industrial standard, providing a mechanically stable and electrically reliable connection, even under harsh operating conditions.
Compatibility and Accessories
The cable is compatible with servo amplifiers Lexium 05, Lexium 32, and Lexium 15, as well as with servo motors of the BMH and BSH series. It can be used in systems employing these components. As accessories, additional cable lengths are available, including models with 3 m, 10 m, 15 m, and 20 m, all featuring the same composition (4x1.5+2x1). These variants allow adaptation to different system configurations. Compatibility with the specified servo motors and drives is guaranteed by the manufacturer.
Installation and Mounting
Mounting is performed by directly connecting the M23 connector to the servo motor. On the servo drive side, a free cable end is provided, which must be connected according to the wiring diagrams of the respective drive. Correct wire assignment is essential for proper operation. Installation does not require special tools, although careful inspection of connections before commissioning is recommended.
Advantages in Operation
The pre-assembled cable reduces installation time and minimizes wiring errors. The use of a standardized M23 connector ensures a secure and repeatable connection. The cable length of 5 m provides sufficient flexibility for typical system configurations. The robust construction and specific conductor composition ensure reliable power and signal transmission under industrial conditions. The warranty period is 18 months, underscoring the product's reliability.