Schneider Electric VW3M5101R200, EAN: 3389119207331

Schneider Electric VW3M5101R200 motor cable 20 m

Industrial Material > Engines and accessories

Schneider Electric VW3M5101R200 motor cable 20 m

Lieske Part No. 597768
Mfg Part No VW3M5101R200
EAN-Code 3389119207331
Manufacturer Schneider Electric
Here only 389,98 EUR
464,08 EUR incl. VAT

Further information for Schneider Electric VW3M5101R200 motor cable 20 m

Complementary
Electrical connectionConnector - industrial M23 for servo motor side; Free end for servo drive side
Net weight4.51 kg
Contractual warranty
Warranty (in months)18
Logistical informations
Country of originDE
Main
Product or component typePower cable
Accessory / separate part typePreassembled power cordset
Accessory / separate part categoryConnection accessories
Accessory / separate part destinationBetween servo motor and servo drive
Range compatibilityLexium 05; Lexium 15; Lexium 32
Cable length20 m
Cable composition4 x 1.5 mm² + 2 x 1 mm²
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height6.600 cm
Package 1 Width41.500 cm
Package 1 Length45.500 cm
Package 1 Weight4.452 kg
Unit Type of Package 2P06
Number of Units in Package 220
Package 2 Height75.000 cm
Package 2 Width60.000 cm
Package 2 Length80.000 cm
Package 2 Weight105.580 kg
The product VW3M5101R200 from Schneider Electric is a pre-assembled power cable for connecting a servo motor to a servo drive in industrial applications. It is specifically designed for connecting BMH and BSH series servo motors to servo amplifiers of the Lexium family, particularly the LXM32. The cable is supplied in a length of 20 m and features a cross-section structure of 4 x 1.5 mm² for power transmission and 2 x 1 mm² for control and signal lines. This composition ensures stable power and signal transmission under high loads and over long distances.

Applications
This cable is designed for use in industrial drive systems where a reliable and robust connection between drive and motor is required. It is particularly used in automation systems operating with Lexium product families 05, 15, and 32.

Functions and Equipment in Detail
On the servo motor side, a M23 industrial connector is pre-mounted, enabling a secure and standardized connection. This connector is designed for industrial applications and ensures a mechanically stable and electrically reliable connection. On the servo drive side, the cable ends as a free end, which is directly connected to the terminal clamps of the amplifier. This configuration allows for flexible installation, as the connection at the drive is made manually and no additional plug connections are required.

Technology Explained Simply
The cable composition of 4 x 1.5 mm² and 2 x 1 mm² is tailored to the requirements of servo drive systems. The four conductors with 1.5 mm² cross-section are used for power transmission, which is necessary for torque and speed control of the motor. The two conductors with 1 mm² cross-section are used for signal transmission, for example for position or status information. The total length of 20 m allows flexible placement of motor and drive without requiring additional extensions or intermediate plug connections.

Compatibility and Accessories
The cable is compatible with servo amplifiers from the Lexium families 05, 15, and 32. It is specifically designed for connection with BMH and BSH series servo motors. As accessories, additional cable variants are available, including models with lengths of 3 m, 5 m, 10 m, and 15 m, also in the configuration 4x1.5 mm² + 2x1 mm². These allow adaptation to different system configurations.

Installation and Mounting
Installation is performed by connecting the M23 connector to the servo motor and directly connecting the free cable end to the terminal clamps of the servo drive. The pre-assembled design reduces installation time and minimizes error sources, as no additional connections or soldering are required. The cable thickness and length are designed to meet the electrical requirements of drive systems.

Operational Advantages
The pre-assembled cable reduces installation time and increases connection reliability, as no additional connections or solder joints are required. The use of a standardized M23 connector ensures a uniform and secure connection. The cable construction is designed for industrial use and enables stable power transmission over the entire length of 20 m. The warranty period is 18 months, indicating the quality and reliability of the product.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/597768
qrcode für Schneider Electric VW3M5101R200 motor cable 20 m