Schneider Electric VW3M5101R100, EAN: 3389119207317

Schneider Electric VW3M5101R100 motor cable 10 m

Industrial Material > Engines and accessories

Schneider Electric VW3M5101R100 motor cable 10 m

Lieske Part No. 434921
Mfg Part No VW3M5101R100
EAN-Code 3389119207317
Manufacturer Schneider Electric
Here only 248,79 EUR
296,06 EUR incl. VAT

Further information for Schneider Electric VW3M5101R100 motor cable 10 m

Complementary
Electrical connectionConnector - industrial M23 for servo motor side; Free end for servo drive side
Net weight2.29 kg
Contractual warranty
Warranty (in months)18
Logistical informations
Country of originDE
Main
Product or component typePower cable
Accessory / separate part typePreassembled power cordset
Accessory / separate part categoryConnection accessories
Accessory / separate part destinationBetween servo motor and servo drive
Range compatibilityLexium 32; Lexium 05; Lexium 15
Cable length10 m
Cable composition4 x 1.5 mm² + 2 x 1 mm²
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height6.000 cm
Package 1 Width40.000 cm
Package 1 Length40.000 cm
Package 1 Weight2.097 kg
Unit Type of Package 2S06
Number of Units in Package 230
Package 2 Height75.000 cm
Package 2 Width60.000 cm
Package 2 Length80.000 cm
Package 2 Weight83.500 kg
This product is a power cable from the manufacturer Schneider Electric, type VW3M5101R100, specifically designed for connecting servo motors from the BMH and BSH series to servo amplifiers from the Lexium family, including Lexium 32, Lexium 05, and Lexium 15. It is a pre-assembled network cable set serving as connection accessory, ensuring the electrical connection between the servo motor and the servo drive. The cable length is 10 meters, suitable for applications with medium range in industrial automation.

Applications
This cable is used in industrial drive systems where reliable and interference-free power and signal transmission between the servo drive and the motor is required. It is intended for use in machine building, manufacturing technology, and automation systems where BMH and BSH series motors are connected to Lexium servo drives. Typical use occurs in environments subject to high mechanical and electrical loads.

Functions and Equipment in Detail
The cable consists of a combination of 4 conductors with a cross-section of 1.5 mm² each and 2 conductors with a cross-section of 1 mm² each. This configuration ensures sufficient power transmission for the drive system components. On the servo motor side, an M23 industrial connector is mounted, enabling a secure and mechanically stable connection. On the servo drive side, the cable ends open, allowing direct connection to the corresponding terminal clamps. This configuration enables flexible integration into existing installations.

Technology Explained Simply
The use of 4x1.5 mm² conductors serves for transmitting power signals and motor current, while the 2x1 mm² conductors are designated for signal communication between motor and drive. The M23 connector is a standardized industrial connector designed for high mechanical loads, ensuring a secure connection even under vibrations and movements. The open end at the drive allows direct connection to terminal clamps, avoiding additional plug connections.

Compatibility and Accessories
The cable is compatible with servo drives from the Lexium family, particularly models Lexium 32, Lexium 05, and Lexium 15. It is designed for use with servo motors from the BMH and BSH series. As accessories, additional cable lengths are available, including models with 3, 5, 15, and 20 meters, all featuring the same conductor configuration (4x1.5+2x1). These variants allow adaptation to different system configurations.

Installation and Mounting
Mounting is performed by connecting the M23 connector to the servo motor and connecting the free end to the corresponding terminal clamps of the servo drive. Installation requires no additional tools or components, as the cable is pre-assembled. The connection is mechanically robust and designed for industrial environments.

Operational Advantages
The pre-assembled cable reduces mounting time and minimizes wiring errors. The use of a standardized M23 connector ensures a secure and repeatable connection. The specific conductor configuration ensures stable power and signal transmission, increasing the reliability of the drive system. The cable length of 10 meters provides sufficient flexibility for many industrial applications without using unnecessarily long cables.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/434921
qrcode für Schneider Electric VW3M5101R100 motor cable 10 m