| Complementary |
| Transmission rate | 10 Mbits 100 m; 100 Mbits 100 m |
| Number of addresses | 256 |
| Communication port protocol | PROFINET |
| Electrical connection | 2 connectors RJ45 |
| Local signalling | 4 LEDs (green/red) for communication status |
| Net weight | 0.45 kg |
| Contractual warranty |
| Warranty (in months) | 18 |
| Logistical informations |
| Country of origin | ID |
| Main |
| Range compatibility | Lexium 32 |
| Accessory / separate part category | Communication accessories |
| Accessory / separate part type | Card |
| Product or component type | Communication module |
| Product compatibility | Lexium 32M |
| Accessory / separate part destination | Servo drive |
| Packing Units |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 6.700 cm |
| Package 1 Width | 13.000 cm |
| Package 1 Length | 19.000 cm |
| Package 1 Weight | 157.000 g |
| Unit Type of Package 2 | S03 |
| Number of Units in Package 2 | 16 |
| Package 2 Height | 30.000 cm |
| Package 2 Width | 30.000 cm |
| Package 2 Length | 40.000 cm |
| Package 2 Weight | 3.171 kg |
The product VW3M3308 from Schneider Electric is a communication module, specifically developed for integrating servo amplifiers from the Lexium 32 product family, particularly type LXM32M, into industrial networks. It is a plug-in card inserted into the designated slot of the servo amplifier to enable communication via the fieldbus protocol
Profinet. This technology is widely used in industrial automation and enables reliable, time-critical data transmission between control systems and drives. The card is thus a central component for networking drive technology in modern production environments.
Applications
The module is used in systems requiring decentralized control of servo drives over a Profinet network. This includes, for example, machine building, packaging technology, material handling systems, or assembly lines, where multiple drives must be synchronized and controlled via a central control system. Compatibility with the Lexium 32M series makes it a direct replacement or add-on part for existing systems requiring expanded communication capabilities.
Functions and Features in Detail
The card features two RJ45 connectors used for the physical network connection. These connectors allow flexible integration into existing Ethernet infrastructures. Communication takes place via the
Profinet protocol, optimized for industrial applications and ensuring high data integrity and low latency. The maximum data transfer rate is 100 Mbit/s over a distance of up to 100 meters, with 10 Mbit/s also supported. This covers most industrial requirements, especially for transmitting control and status data between the control system and the drive.
Technology Explained Simply
Local signaling is provided by four LEDs, which light up in green and red to indicate the communication status. These indicators support quick diagnosis of network connections, such as verifying whether the card is correctly connected, whether communication is active, or if errors occur. The card is designed for a maximum of 256 addresses, meaning it can be used in larger, complex networks with multiple connected devices without address conflicts. The use of
RJ45 connectors is standardized and enables a simple, mechanically robust connection.
Installation and Mounting
Installation is performed by simply inserting the card into the designated slot of the servo amplifier. No additional tools or special mounting procedures are required. The card is designed to be directly integrated into the module, eliminating the need for additional connections or adapters. Network connection is made via the RJ45 connectors, which are directly connected to the existing Ethernet network.
Operational Advantages
Integrating the module enables centralized control and monitoring of drives via the Profinet network. This reduces the need for additional control wiring and simplifies commissioning and maintenance. The local LED display supports quick fault diagnosis, increasing operational uptime and shortening maintenance intervals. The high number of supported addresses (256) also makes the module suitable for larger installations where multiple drives are controlled over a common network.