Schneider Electric VW3L1T000R30, EAN: 3606480216305

Schneider Electric VW3L1T000R30 commissioning cable 3 m

Industrial Material > Engines and accessories

Schneider Electric VW3L1T000R30 commissioning cable 3 m

Lieske Part No. 774032
Mfg Part No VW3L1T000R30
EAN-Code 3606480216305
Manufacturer Schneider Electric
Here only 114,13 EUR
135,81 EUR incl. VAT

Further information for Schneider Electric VW3L1T000R30 commissioning cable 3 m

Complementary
Communication interfaceRS485
Integrated connection typeSerial link
Product specific applicationTo set/program communication parameters
Cable length3 m
Electrical connection1 connector, 6 pins for integrated drive; 1 connector RJ45 for RJ45/USB adapter
Condition of useWith specific accessories
Net weight0.5 kg
Contractual warranty
Warranty (in months)18
Logistical informations
Country of originCZ
Main
Range compatibilityLexium ILS; Lexium ILA; Lexium ILE
Accessory / separate part typeCable
Accessory / separate part categoryConnection accessory
Product compatibilityILS; ILA; ILE
Accessory / separate part destinationFor Lexium integrated drive
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height2.0 cm
Package 1 Width18.0 cm
Package 1 Length19.0 cm
Package 1 Weight215.0 g
Unit Type of Package 2S03
Number of Units in Package 220
Package 2 Height30.0 cm
Package 2 Width30.0 cm
Package 2 Length40.0 cm
Package 2 Weight4.813 kg
The product VW3L1T000R30 from Schneider Electric is a pre-assembled commissioning cable for integrated drives of the Lexium family, specifically for the models ILA, ILE and ILS. It is used for setting and programming the communication parameters of these drives and enables the connection between the drive and a control device or a PC via a serial interface. The cable connects on one side to the integrated drive via a 6-pin connector for the RS485 interface and on the other side features an RJ45 connector, which is connected to an RJ45/USB adapter or a corresponding network device. The cable length is 3 m, providing sufficient reach for typical commissioning situations in industrial automation.

Applications
This cable is specifically designed for the commissioning and configuration of integrated drives from the Lexium series. It is used to set communication parameters such as baud rate, parity and data bits, which are required for correct integration into existing control systems. The cable is used in industrial environments where the drives are employed in machine building, material handling or packaging technology. The application requires the use of additional accessories, such as an RJ45/USB adapter, to establish communication with a PC or control device.

Functions and Equipment in Detail
The cable features a serial line with RS485 interface, designed for bidirectional data transmission between the drive and an external device. The connection to the drive is made via a 6-pin connector, which is directly connected to the serial interface of the Lexium drive. On the other side, an RJ45 connector is integrated, which is connected to an RJ45/USB adapter device to enable communication with a PC or control unit. The cable length of 3 m provides sufficient space for positioning the drive and the control device in the operating environment.

Technology Explained Simply
RS485 is a serial communication interface suitable for data transmission over long distances in industrial environments. It enables bidirectional communication and is robust against electromagnetic interference. The cable is supplied as a pre-assembled product, meaning it is already fitted with the necessary connectors and can be used directly without additional wiring work. The connection is made via a physical cable, with the electrical connection established through the 6-pin connector at the drive and the RJ45 connector at the other end.

Compatibility and Accessories
The cable is compatible with the integrated Lexium drives ILA, ILE and ILS. It is specifically developed for commissioning these drives and requires the use of additional accessories, such as an RJ45/USB adapter, to establish communication with a PC or control unit. Suitable accessories include the cable VW3L1R000R30 (LXM accessory cable 3 m for commissioning) and the insert VW3L1R000 (for commissioning socket/plug M12 5-pin), which can be used in combination with the commissioning cable to support drive configuration.

Installation and Mounting
Mounting is done by directly connecting the 6-pin connector to the serial interface of the Lexium drive and the RJ45 connector to an RJ45/USB adapter device. The connection is mechanically stable and enables secure data transmission. The cable length of 3 m allows flexible positioning of the drive and control device. Installation does not require special tools, as the connectors are simply plugged in. The cable is used in conjunction with special accessories, such as an RJ45/USB adapter, to establish communication with a PC or control unit.

Operational Advantages
The commissioning cable enables quick and reliable configuration of the integrated Lexium series drives. The pre-assembled design reduces installation time and minimizes wiring errors. The use of the RS485 interface ensures robust and reliable data transmission, even in electrically noisy environments. The cable length of 3 m provides sufficient space for positioning the devices in industrial applications. Compatibility with models ILA, ILE and ILS makes the cable a universal tool for commissioning these drives.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/774032
qrcode für Schneider Electric VW3L1T000R30 commissioning cable 3 m