| Complementary |
| Range compatibility | Altivar 61Q; Altivar 61; Altistart 48; Altivar 32; Altivar 212; Altivar Process ATV600; Altivar Process ATV900; Altivar 21; Altivar Machine ATV340 except Sercos drives; Altistart 22; Altivar 71; Altivar 12; Altivar Machine ATV320; Altivar Easy 310; Altivar 71Q; Modicon M238; Modicon LMC058; Altivar 31C; Altivar Easy 610; Lexium SD3; Altivar 31; Modicon M258; Altivar 312; Zelio Logic |
| Communication port protocol | Modbus |
| Electrical connection | 1 male connector RJ45; 2 female connectors RJ45 |
| Net weight | 0.19 kg |
| Contractual warranty |
| Warranty (in months) | 18 |
| Logistical informations |
| Country of origin | CN |
| Main |
| Range of product | Altivar |
| Bus type | Modbus |
| Accessory / separate part category | Connection accessory |
| Accessory / separate part type | T-junction box |
| Accessory / separate part destination | Modbus network |
| Cable length | 0.3 m |
| Quantity per set | Set of 1 |
| Packing Units |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 3.000 cm |
| Package 1 Width | 11.000 cm |
| Package 1 Length | 15.000 cm |
| Package 1 Weight | 47.000 g |
| Unit Type of Package 2 | S03 |
| Number of Units in Package 2 | 60 |
| Package 2 Height | 30 cm |
| Package 2 Width | 30 cm |
| Package 2 Length | 40 cm |
| Package 2 Weight | 3.527 kg |
| Unit Type of Package 3 | P06 |
| Number of Units in Package 3 | 480 |
| Package 3 Height | 75.000 cm |
| Package 3 Width | 60.000 cm |
| Package 3 Length | 80.000 cm |
| Package 3 Weight | 38.204 kg |
The article VW3A8306TF03 from Schneider Electric is a Modbus T-connector, serving as connection accessory for industrial control and drive systems. It enables branching of a serial Modbus connection via the RS 485 interface, featuring an RJ45 plug at one end and two RJ45 sockets at the other end. The cable length is 0.3 m, allowing for compact and precise integration into existing networks. The device is specifically designed for use with products from the Altivar series as well as with Lexium systems, being compatible with a wide range of models, including Altivar 61Q, Altivar 61, Altistart 48, Altivar 32, Altivar 212, Altivar Prozess ATV600, ATV900, Altivar 21, Altivar Maschine ATV340 (excluding Sercos drives), Altistart 22, Altivar 71, Altivar 12, Altivar Maschine ATV320, Altivar Easy 310, Altivar 71Q, Modicon M238, Modicon LMC058, Altivar 31C, Altivar Easy 610, Lexium SD3, Altivar 31, Modicon M258, Altivar 312, and Zelio Logic.
Applications
The T-connector is used in industrial automation systems where multiple devices communicate over a Modbus network. It serves as a branching component to connect a device (e.g. a frequency converter or control unit) to an existing Modbus network without interrupting the existing cabling. Its use in drive systems such as Altivar or Lexium enables a flexible and scalable network architecture, particularly in environments with limited space or complex cabling situations.
Functions and Equipment in Detail
The device features an RJ45 plug at one end, which is inserted into an existing Modbus line. At the other end, two RJ45 sockets are integrated, to which individual devices can be connected. The cable length of 0.3 m is designed for short connections near the connection point, ensuring a clear and orderly cabling setup. The use of RJ45 connectors allows for quick and secure installation without additional tools. Compatibility with the RS 485 interface ensures that data transmission in the Modbus protocol functions correctly.
Technology Explained Simply
The T-connector operates as a passive network component, requiring no separate power supply. It forwards the electrical signals of the RS 485 interface without altering them. The use of RJ45 connectors is common in industrial communication due to their robustness and standardization. The cable length of 0.3 m is sufficient to enable small branches without compromising signal integrity. The maximum number of connected devices in the network depends on specific settings and network architecture, but is not directly limited by the T-connector device.
Compatibility and Accessories
The device is specifically developed for use with products from the Altivar and Lexium families. It is compatible with a wide range of models used in industrial automation. As accessories, our range includes Modbus cables, such as cable VW3A8306R10 with a length of 1 m, which also features RJ45 plugs at both ends. These cables can be used to establish connections between the T-connector and connected devices, with cable length adjustable according to requirements.
Installation and Mounting
Installation is performed by simply inserting the RJ45 plug into the existing Modbus line and then connecting the two RJ45 sockets to the desired devices. No additional tools or special mounting procedures are required. Cabling is carried out in an industrial environment, ensuring mechanical stability and correct polarity of the RJ45 connections. The cable length of 0.3 m requires devices to be placed in close proximity to the connection point.
Operational Advantages
The T-connector enables flexible expansion of Modbus networks without requiring modifications to existing infrastructure. The use of RJ45 connectors ensures quick and secure installation. Compatibility with a broad range of Altivar and Lexium products makes the device a universal accessory in industrial applications. The short cable length of 0.3 m reduces cable volume and supports orderly cabling. The device is housed in a robust enclosure suitable for industrial environments.