| Complementary |
| Duty cycle | Light cycle (heavy duty) |
| Average power available | 3.2 kW at 50 °C |
| Electrical connection | terminal, connection capacity: |
| Protection type | Thermal protection via drive or temperature control switch at 120 °C |
| Width | 540 mm |
| Height | 485 mm |
| Depth | 450 mm |
| Net weight | 21 kg |
| Contractual warranty |
| Warranty (in months) | 18 |
| Environment |
| IP degree of protection | IP23 |
| Ambient air temperature for storage | -25…70 °C |
| Ambient air temperature for operation | 0…50 °C |
| Product certifications | UL; CE; EAC; UKCA; RoHS |
| Logistical informations |
| Country of origin | DE |
| Main |
| Range of product | Altivar |
| Range compatibility | Altivar Process ATV900 |
| Product or component type | Braking resistor |
| Ohmic value | 2.5 Ohm |
| [Ue] rated operational voltage | 24 V DC; 250 V AC |
| Packing Units |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 48.500 cm |
| Package 1 Width | 54.000 cm |
| Package 1 Length | 45.000 cm |
| Package 1 Weight | 34.000 kg |
Braking resistor, for ATV930D30M3 - D45M3, ATV930C11N4C - C16N4C drives. Reference values for a light braking cycle. Power VA 3.2 kW, protection class IP23, resistance 2.5 O at 20 °C. Supply voltage 200-240 V or 380-480 V 50/60 Hz. Load factor for resistors The value of the average power that can be dissipated from the resistor into the housing at 50 °C. Determined for a load factor during braking that corresponds to the majority of common applications. Standard overload 0.8 s braking at a braking torque of 1.2 Tn for a cycle of 40 s. High overload 0.8 s braking at a braking torque of 1.5 Tn for a cycle of 40 s. Required number per drive 1. Braking resistors allow Altivar Process drives to operate during braking to a standstill by dissipating the braking energy. They enable maximum transient braking torque. Braking resistors are designed for a defined cycle. Depending on your own applications and cycles, you can use these resistors or define a new value. Braking resistors for light braking cycles for machines with cycles and inertia. The braking power is limited to 1.5 Tn for 0.8 s every 40 s. Braking resistors for medium braking cycles for machines with high inertia and conveyor systems. The braking power is limited to 1.35 Tn for 4 s every 40 s.