Complementary
Duty cycle	Light cycle (heavy duty)
Average power available	1.1 kW at 50 °C
Electrical connection	terminal, connection capacity:
Protection type	Thermal protection via drive or temperature control switch at 120 °C
Width	190 mm
Height	570 mm
Depth	180 mm
Net weight	3.8 kg
Contractual warranty
Warranty (in months)	18
Environment
IP degree of protection	IP20
Ambient air temperature for storage	-25…70 °C
Ambient air temperature for operation	0…50 °C
Product certifications	UL; CE; EAC; UKCA; RoHS
Logistical informations
Country of origin	DE
Main
Range of product	Altivar
Range compatibility	Altivar Machine ATV320; Altivar Process ATV900; Altivar Machine ATV340
Product or component type	Braking resistor
Ohmic value	16 Ohm
[Ue] rated operational voltage	24 V DC; 250 V AC
Packing Units
Unit Type of Package 1	PCE
Number of Units in Package 1	1
Package 1 Height	20.600 cm
Package 1 Width	25.200 cm
Package 1 Length	58.200 cm
Package 1 Weight	4.434 kg
Unit Type of Package 2	P06
Number of Units in Package 2	8
Package 2 Height	75.000 cm
Package 2 Width	60.000 cm
Package 2 Length	80.000 cm
Package 2 Weight	44.164 kg

Braking resistor, for ATV930U55M3 - U75M3, ATV930D18N4 - D30N4, ATV950D18N4 - D30N4, ATV950D18N4E - D30N4E drives. Reference values for a light braking cycle. Power VA 1.1 kW, protection class IP20, resistance 16 ? at 20 °C. Supply voltage 200-240 V or 380-480 V 50/60 Hz. Load factor for resistors The value of the average power that can be dissipated from the resistor into the housing at 50 °C. Determined for a load factor during braking that corresponds to the majority of common applications. Standard overload 0.8 s braking at a braking torque of 1.2 Tn for a cycle of 40 s. High overload 0.8 s braking at a braking torque of 1.5 Tn for a cycle of 40 s. Required number per drive 1. Braking resistors allow Altivar Process drives to operate during braking to a standstill by dissipating the braking energy. They enable maximum transient braking torque. Braking resistors are designed for a defined cycle. Depending on your own applications and cycles, you can use these resistors or define a new value. Braking resistors for light braking cycles for machines with cycles and inertia. The braking power is limited to 1.5 Tn for 0.8 s every 40 s. Braking resistors for medium braking cycles for machines with high inertia and conveyor systems. The braking power is limited to 1.35 Tn for 4 s every 40 s.