| Complementary |
| Energy peak | 1900 J at 400 V; 3800 J at 230 V; 1900 J at 480 V; 4200 J at 115 V |
| Continuous power | 100 W |
| Protection type | Thermal protection via the servo drive |
| Net weight | 0.63 kg |
| Cable length | 0.75 m |
| Contractual warranty |
| Warranty (in months) | 18 |
| Environment |
| IP degree of protection | IP65 |
| Ambient air temperature for storage | -25…85 °C |
| Ambient air temperature for operation | 0…50 °C |
| Logistical informations |
| Country of origin | CZ |
| Main |
| Range of product | Lexium; Altivar |
| Range compatibility | Lexium 28; Lexium 32i; Lexium 52; Lexium 05; Lexium 32; Lexium 15; Easy Lexium 16 |
| Product compatibility | Motion servo drive LXM16D at 0.75 kW, 200...230 V, single phase; Motion servo drive LXM16D at 1 kW, 200...230 V, single phase; Motion servo drive LXM16D at 1.5 kW, 200...230 V, single phase |
| Product or component type | Braking resistor |
| Ohmic value | 27 Ohm |
| Packing Units |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 4.5 cm |
| Package 1 Width | 12.6 cm |
| Package 1 Length | 39.8 cm |
| Package 1 Weight | 600.0 g |
| Unit Type of Package 2 | S04 |
| Number of Units in Package 2 | 20 |
| Package 2 Height | 30 cm |
| Package 2 Width | 40 cm |
| Package 2 Length | 60 cm |
| Package 2 Weight | 12.912 kg |
The braking resistor VW3A7602R07 from Schneider Electric is a specific accessory for servo drives of the Lexium series as well as frequency inverters of the Altivar series. It serves for the safe dissipation of braking energy generated during deceleration of drives with synchronous motors. The component is designed for use in industrial applications where precise and reliable braking function is required, particularly for drives with high transient braking torques.
Applications
The braking resistor is compatible with various product families of the Lexium series, including Lexium 28, Lexium 32i, Lexium 52, Lexium 05, Lexium 32, Lexium 15, and Easy Lexium 16. It is specifically used for Motion servo drives of type LXM16D with power ratings of 0.75 kW, 1 kW, and 1.5 kW at a supply voltage of 200 to 230 V and single-phase supply. The application occurs in environments where controlled energy dissipation during braking is necessary to ensure electrical safety and extend the service life of drive technology.
Functions and Equipment in Detail
The resistor features an ohmic value of
27 Ohm and a continuous power rating of
100 W, making it suitable for continuous operating conditions. The peak energy is 1900 J at 400 V, 3800 J at 230 V, 1900 J at 480 V, and 4200 J at 115 V, highlighting its capability to dissipate high energy amounts over short periods. The cable length is
0.75 m, enabling flexible mounting and wiring. Thermal protection is provided via the servo drive, preventing overheating of the resistor.
Technology Explained Simply
A braking resistor converts the electrical energy generated during braking in the drive system into heat, which is then dissipated into the environment. This prevents overvoltage in the drive system, which could cause damage. The 27 Ohm resistance is matched to the electrical parameters of the compatible servo drives to ensure efficient energy dissipation. The continuous power rating of 100 W allows for continuous operation under normal load conditions, while the high peak energy values indicate the ability to handle short-term high loads. The cable length of 0.75 m provides sufficient flexibility for installation in industrial machines and systems.
Compatibility and Accessories
The braking resistor is intended for the
Lexium and
Altivar series and can be combined with the mentioned product families. Compatibility is specifically limited to Motion servo drives LXM16D with the specified power ratings and voltages. Use with other drive systems is not intended and may result in malfunctions. Product specifications are matched to the respective drive systems to ensure safe and efficient energy dissipation.
Mounting and Installation
Mounting is performed in environments with an operating temperature of 0 to 50 °C and a storage temperature of -25 to 85 °C. The protection rating
IP65 ensures high protection against dust and splashing water, enabling use in industrial environments with demanding ambient conditions. The cable length of 0.75 m allows flexible placement of the resistor within the machine space, with wiring to be carried out in accordance with electrical regulations and the requirements of the respective drive system.
Advantages in Operation
The use of the braking resistor ensures controlled and safe braking of drives with synchronous motors. The integrated thermal protection function via the servo drive prevents overheating and increases operational safety. The high peak energy capacity enables dissipation of short-term energy peaks, which is particularly beneficial during dynamic drive operations. The IP65 protection rating makes the resistor suitable for use in harsh industrial environments where dust and moisture are prevalent. The compact design and predefined cable length facilitate integration into existing systems.