| Complementary |
| Maximum motor cable length | 1000 m unshielded cable; 500 m shielded cable |
| [In] rated current | 95 A |
| Thermal losses | 290 W at 4 kHz |
| Electrical connection | terminal block, connection capacity: 50 mm² / 1 AWG |
| Switching frequency | 4...8 kHz |
| Maximum output frequency | 100 Hz |
| Maximum voltage drop at rated load | 8 % |
| Permissible voltage | 480 V AC |
| Max current | 1.20 x nominal current (duration = 60 s) |
| Width | 380 mm |
| Height | 760 mm |
| Depth | 285 mm |
| Net weight | 60 kg |
| Contractual warranty |
| Warranty (in months) | 18 |
| Environment |
| IP degree of protection | IP20; IP21 (with kit VW3A53904) |
| Environmental characteristic | Biological pollution resistance class 3B1 conforming to IEC 60721-3-3; Chemical pollution resistance class 3C3 conforming to IEC 60721-3-3; Dust pollution resistance class 3S3 conforming to IEC 60721-3-3 |
| Pollution degree | 3 conforming to IEC 61800-5-1 |
| Relative humidity | 5…95 % without condensation |
| Ambient air temperature for operation | 50…60 °C (with current derating 1.5 % per °C); -15…50 °C (without current derating) |
| Ambient air temperature for storage | -40…70 °C |
| Mechanical robustness | Shocks class 3M4 conforming to IEC 60721-3-3; Vibrations class 3M4 conforming to IEC 60721-3-3 |
| Logistical informations |
| Country of origin | CN |
| Main |
| Product or component type | Sinus filter |
| Range compatibility | Altivar Process ATV600; Altivar Process ATV900 |
| Product specific application | Output filter |
| Packing Units |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 43.000 cm |
| Package 1 Width | 44.500 cm |
| Package 1 Length | 78.500 cm |
| Package 1 Weight | 71.500 kg |
Sinusfilter Dreiphasige Versorgungsspannung 200-240 V. Sinusausgangsfilter, für Frequenzumrichter, für Umrichter ATV630D15M3 - D22M3, IP 20. Bemessungsstrom 95 A. Die Filter arbeiten in einem Schaltfrequenzbereich zwischen 4 und 8 kHz. Wenn der Filter mit ATV650U07N4/N4E - D90N4/N4E Umrichtern verwendet wird, muss er in einen separaten Schrank verbaut werden, um die Schutzart IP 55 zu gewährleisten.