Complementary
Maximum motor cable length	500 m unshielded cable; 300 m shielded cable
dv/dt	6000 V/µs max at 200...240 V; 6000 V/µs max at 380...480 V
Thermal losses	287 W at 4 kHz
maximum drive output frequency	100 Hz
Ambient air temperature for operation	-10…50 °C (without current derating); 50…60 °C (with current derating 1.5 % per °C)
Operating altitude	0...1000 m without current derating; 1000...4000 m with current derating 1 % per 100 m
Width	420 mm
Height	360 mm
Depth	270 mm
Net weight	40 kg
Contractual warranty
Warranty (in months)	18
Environment
IP degree of protection	IP00
Ambient air temperature for storage	-40…70 °C
Logistical informations
Country of origin	CN
Main
Product or component type	Dv/dt filter
Range compatibility	Altivar Process ATV600; Altivar Process ATV900; Altivar ATV610
Product specific application	Output filter
[In] rated current	305 A
nedded quantity	1
Electrical connection	Copper bar M10, connection capacity: 300 mm² / 500 kcmil
Packing Units
Unit Type of Package 1	PCE
Number of Units in Package 1	1
Package 1 Height	43.500 cm
Package 1 Width	45.000 cm
Package 1 Length	79.000 cm
Package 1 Weight	53.000 kg

Output filter du/dt Three-phase supply voltage 200-240 V. Du/dt output filter for frequency converter, IP00, for ATV630D55M3 - D75M3 converters. Rated current 305 A, max. switching frequency 2.5 kHz. The filters operate in a switching frequency range between 2 and 8 kHz. The values indicated depend on the nominal switching frequency of the converter. This frequency depends on the nominal size of the converter. These cable lengths are only examples as they vary according to the application. They are for motors in accordance with IEC 6034-25 and NEMA MG1/31.2006. If the filter is used with ATV650U07N4/N4E - D90N4/N4E converters, it must be installed in a separate cabinet to ensure protection class IP 55. Shielded cable (300/984 m).