Complementary
Electrical connection	Terminal 16 mm² 4 AWG
maximum earth leakage current	7.6 mA at 400 V 50 Hz TN; 7.6 mA at 400 V 50 Hz TT
power supply voltage	380…480 V; 200…240 V
Tolerance	10 %
Mechanical robustness	Shocks class 3M4 conforming to IEC 60721-3-3; Vibrations class 3M4 conforming to IEC 60721-3-3
Width	90 mm
Height	283 mm
Depth	165 mm
Net weight	5.2 kg
Contractual warranty
Warranty (in months)	18
Environment
IP degree of protection	IP20mounting side by side; IP21with kit VW3A47904
Relative humidity	5…95 % without condensation conforming to IEC 61800-5-1
Ambient air temperature for operation	-10…50 °C (without current derating); 50…60 °C (with current derating 1.5 % per °C)
Ambient air temperature for storage	-40…70 °C
Operating altitude	0...1000 m without current derating; 1000...4000 m with current derating 1 % per 100 m
Standards	IEC 61800-3
Logistical informations
Country of origin	CN
Main
Range of product	Altivar
Product or component type	EMC input filter
Range compatibility	Altivar Process ATV900; Altivar Process ATV600
Product specific application	Radio interference input filter
[In] rated current	50 A
Thermal losses	8 W
Network number of phases	Three phase
Packing Units
Unit Type of Package 1	PCE
Number of Units in Package 1	1
Package 1 Height	29.000 cm
Package 1 Width	37.500 cm
Package 1 Length	52.500 cm
Package 1 Weight	6.242 kg
Unit Type of Package 2	P06
Number of Units in Package 2	4
Package 2 Height	75.000 cm
Package 2 Width	60.000 cm
Package 2 Length	80.000 cm
Package 2 Weight	35.240 kg

Three-phase supply voltage 200-240 V 50 Hz. EMC radio interference suppression filter, for frequency converter, for ATV630D11M3 converter, category C3, 50 m. Filter rated current 7.6 mA. The max. lengths are only examples as they vary according to the stray capacitance of the motors and cables used. For motors connected in parallel, the length of all cables must be taken into account. The values indicated depend on the nominal switching frequency of the converter. This frequency depends on the nominal size of the converter. Max. length of the shielded cable according to IEC/EN 61800-3 category C2 (50m). Max. length of the shielded cable according to IEC/EN 61800-3 category C3. For more stringent requirements, additional EMC input filters can be used. They reduce conducted emissions to values below category C1, C2 or C3 of the IEC/EN 61800-3 standard. The use of these additional filters is only possible in TN networks (connection to neutral conductor) or TT networks (connection of the neutral conductor to earth). According to the standard IEC/EN 61800-3, Appendix D2.1, filters in IT systems (isolated or neutral earthed impedance) can lead to the fact that the continuous insulation monitoring only takes place in random operation.