| Complementary |
| Product compatibility | ATV71H...M3383; ATV71H...M3X383; ATV71H...N4383 |
| Maximum supply current | 0.2 A |
| Protection type | Short-circuit protection; Overload protection |
| Maximum cable distance between devices | 50 m |
| Speed feedback resolution | 2exp(13) maximum |
| Clock frequency | 500 kHz fixed |
| Output type | SinCos 10000 lines maximum; EnDat 2.1 25 bits maximum; SSI Gray or binary with no, odd or even parity, configurable; SinCos Hiperface 10000 lines maximum |
| Electrical connection | Terminal, connection capacity: 0.5 mm² (20 AWG) |
| Net weight | 0.2 kg |
| Contractual warranty |
| Warranty (in months) | 18 |
| Logistical informations |
| Country of origin | FR |
| Main |
| Range of product | Altivar |
| Product or component type | Encoder interface card |
| Range compatibility | Altivar 71; Altivar 71Q; Altivar Lift |
| Encoder type | SinCos Hiperface; EnDat 2.2; SSI |
| [Us] rated supply voltage | 5 V (voltage limits: 5…5.5 V); 8 V (voltage limits: 8…8.5 V); 12 V (voltage limits: 12…12.5 V) |
| Packing Units |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 8.000 cm |
| Package 1 Width | 17.000 cm |
| Package 1 Length | 23.500 cm |
| Package 1 Weight | 156.000 g |
| Unit Type of Package 2 | S03 |
| Number of Units in Package 2 | 7 |
| Package 2 Height | 30 cm |
| Package 2 Width | 30 cm |
| Package 2 Length | 40 cm |
| Package 2 Weight | 1.566 kg |
This universal encoder interface card is an option for the Altivar range of variable speed drives. It is compatible with Altivar 71. It improves drive performance regardless of the load condition of the motor, torque at zero, accurate speed control, torque accuracy. As well as shorter response times to a torque surge, improved dynamic performance in transient condition. It is protected against short circuit and overload. It weighs 200 g. It is used for flux vector control operation with sensor (FVC mode) for asynchronous motors or for vector control operation with speed feedback (FSY mode) for synchronous motors. It is inserted in a special slot of the drive.