| Complementary |
| Maximum supply current | 0.175 A |
| Protection type | Overload protection; Short-circuit protection |
| Maximum cable distance between devices | 500 m |
| Maximum operating frequency | 300 kHz |
| Input signal | A; B; Compliment of A; Compliment of B/AB/A |
| Input impedance | 1000 Ohm |
| Voltage state 1 guaranteed | > 11.5...< 25 V |
| Electrical connection | Terminal, connection capacity: 0.2 mm² (24 AWG) |
| Contractual warranty |
| Warranty (in months) | 18 |
| Logistical informations |
| Country of origin | ID |
| Main |
| Range of product | Altivar |
| Product or component type | Encoder interface card |
| Range compatibility | Altivar 61Q; Altivar 71Q; Altivar 71; Altivar 61; Altivar Lift |
| Discrete output type | Push-pull |
| [Us] rated supply voltage | 24 V DC (voltage limits: 20…30 V) |
| Number of pulses per revolution | 10000 for ATV71H......383; 5000 for all ATV61 drives; 5000 for ATV71H...M3; 5000 for ATV71H...M3X; 5000 for ATV71H...N4 |
| Packing Units |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 7.500 cm |
| Package 1 Width | 17.000 cm |
| Package 1 Length | 23.000 cm |
| Package 1 Weight | 142.000 g |
| Unit Type of Package 2 | S03 |
| Number of Units in Package 2 | 7 |
| Package 2 Height | 30 cm |
| Package 2 Width | 30 cm |
| Package 2 Length | 40 cm |
| Package 2 Weight | 1.503 kg |
Diese Encoder-Schnittstellenkarte kann für Flux Vector Control-Betrieb mit Sensor für Asynchronmotoren verwendet werden. Er kann auch für den Vektorregelungsbetrieb mit Drehzahlrückführung für Synchronmotoren verwendet werden. Er verbessert die Antriebsleistung unabhängig vom Lastzustand des Motors. Er ist kompatibel mit der Encoder-Technologie mit Push-Pull-Ausgängen. Diese Karte ist einfach zu installieren und zu entfernen, sie wird in einen speziellen Steckplatz des Frequenzumrichters eingesetzt. Er ist gegen Kurzschluss und Überlast in der Geberversorgung geschützt. Er ist kompatibel mit Altivar 61 und Altivar 71.