| Complementary |
| Maximum supply current | 0.2 A |
| Protection type | Short-circuit protection; Overload protection |
| Maximum cable distance between devices | 50 m |
| Maximum operating frequency | 300 kHz |
| Input signal | A; B; Compliment of A; Compliment of B |
| Input impedance | 440 Ohm |
| Electrical connection | Terminal, connection capacity: 0.2 mm² (24 AWG) |
| Net weight | 0.2 kg |
| Contractual warranty |
| Warranty (in months) | 18 |
| Logistical informations |
| Country of origin | ID |
| Main |
| Range of product | Altivar |
| Product or component type | Encoder interface card |
| Range compatibility | Altivar Lift; Altivar 61; Altivar 71Q; Altivar 71; Altivar 61Q |
| Discrete output type | Differential |
| Communication port protocol | RS422 |
| [Us] rated supply voltage | 5 V DC (voltage limits: 5…5.5 V) |
| Number of pulses per revolution | 10000 for ATV71H......383; 5000 for all ATV61 drives; 5000 for ATV71H...M3; 5000 for ATV71H...M3X; 5000 for ATV71H...N4 |
| Packing Units |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 7.500 cm |
| Package 1 Width | 17.000 cm |
| Package 1 Length | 23.000 cm |
| Package 1 Weight | 142.000 g |
| Unit Type of Package 2 | S03 |
| Number of Units in Package 2 | 7 |
| Package 2 Height | 30 cm |
| Package 2 Width | 30 cm |
| Package 2 Length | 40 cm |
| Package 2 Weight | 1.479 kg |
Diese Encoder-Schnittstellenkarte kann für Flux Vector Control-Betrieb mit Sensor für Asynchronmotoren verwendet werden. Er kann auch für den Vektorregelungsbetrieb mit Drehzahlrückführung für Synchronmotoren verwendet werden. Er verbessert die Antriebsleistung unabhängig vom Lastzustand des Motors. Er ist kompatibel mit der RS 422-Differenzialausgangs-Encodertechnologie. Diese Karte ist einfach zu installieren und zu entfernen, sie wird in einen speziellen Steckplatz des Frequenzumrichters eingesetzt. Er ist gegen Kurzschluss und Überlast in der Geberversorgung geschützt. Er ist kompatibel mit Altivar 61 und Altivar 71.