| Complementary |
| Electrical durability | 100000 cycles for configurable relay logic |
| Discrete output voltage | 24 V DC (voltage limits: |
| Maximum output current | 0.2 A, assignable logic |
| Minimum switching current | 3 mA at 24 V DC for configurable relay logic |
| Maximum switching current | Configurable relay logic 5 A at 250 V AC on resistive load, cos phi = 1; Configurable relay logic 5 A at 30 V DC on resistive load, cos phi = 1; Configurable relay logic 1.5 A at 250 V AC on inductive load, cos phi = 0.4 and L/R = 7 ms; Configurable relay logic 1.5 A at 30 V DC on inductive load, cos phi = 0.4 and L/R = 7 ms |
| PTC probe input | TH2+, TH2- trip resistance, impedance: 3 kOhm; TH2+, TH2- reset resistance, impedance: 1.8 Ohm; TH2+, TH2- short circuit protection, impedance: < 0.05 Ohm; TH2+, TH2- for 6 PTC probe, impedance: |
| Discrete input voltage | 24 V DC (voltage limits: |
| Discrete input frequency | 0...30 kHz frequency control |
| Electrical connection | Terminal, 1.5 mm² / 16 AWG, 0.25 N.m |
| Net weight | 0.3 kg |
| Contractual warranty |
| Warranty (in months) | 18 |
| Logistical informations |
| Country of origin | ID |
| Main |
| Product or component type | Extended I/O card |
| Range compatibility | Altivar 61Q; Altivar Lift; Altivar 71Q; Altivar 71; Altivar 61 |
| Supply | Internal supply for reference potentiometer, 10.5 V DC (10…11 V) |
| Analogue input number | 2 |
| Analogue input type | AI3-/Al3+ differential current programmable: 0...20 mA, impedance: 250 Ohm, sampling time: 4…6 ms, resolution: 11 bits + sign; AI4 software-configurable current: 0...20 mA, impedance: 250 Ohm, sampling time: 4…6 ms, resolution: 11 bits; AI4 software-configurable voltage: 0...10 V DC, 24 V max, impedance: 30000 Ohm, sampling time: 4…6 ms, resolution: 11 bits |
| Analogue output number | 2 |
| Analogue output type | AO2 software-configurable current: 0...20 mA, impedance: 500 Ohm, sampling time: 4…6 ms, resolution: 10 bits; AO2 software-configurable voltage: +/- 10 V DC, impedance: 470 Ohm, sampling time: 4…6 ms, resolution: 10 bits; AO3 software-configurable current: 0...20 mA, impedance: 500 Ohm, sampling time: 4…6 ms, resolution: 10 bits; AO3 software-configurable voltage: +/- 10 V DC, impedance: 470 Ohm, sampling time: 4…6 ms, resolution: 10 bits |
| Discrete output number | 5 |
| Discrete output type | (LO3, LO4) assignable logic, sampling time: 4…6 ms, compatible with level 1 PLC; (R4A, R4B, R4C) configurable relay logic |
| Discrete output logic | (LO3, LO4) negative; (LO3, LO4) positive |
| Discrete input number | 6 |
| Discrete input type | (RP) frequency control, sampling time: 4…6 ms; (LI11...LI14) programmable, compatible with level 1 PLC, impedance: 3.5 kOhm, sampling time: 4…6 ms |
| Discrete input logic | Negative (LI11...LI14), >= 16 V (state 0), = 3.5 V (state 1) |
| Packing Units |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 7.000 cm |
| Package 1 Width | 17.000 cm |
| Package 1 Length | 23.000 cm |
| Package 1 Weight | 382.000 g |
| Unit Type of Package 2 | S03 |
| Number of Units in Package 2 | 7 |
| Package 2 Height | 30.000 cm |
| Package 2 Width | 30.000 cm |
| Package 2 Length | 40.000 cm |
| Package 2 Weight | 3.208 kg |
Mit dieser erweiterten E/A-Karte kann Ihr Antrieb die Anforderungen von komplexeren oder umfangreicheren Anwendungen erfüllen. Es verfügt über vier logische Eingänge, zwei analoge Eingänge, einen Eingang für den PTC-Fühler und einen Eingang zur Frequenzsteuerung. Außerdem verfügt er über drei Logikausgänge und zwei Analogausgänge. Er ist kompatibel mit Altivar 61 und Altivar 71.