| Additional features |
| Network contamination level | Slightly contaminated |
| [Gh/Sn] harmonic load | 15…25 % |
| [THDU] Total harmonic distortion of voltage | 3…4 % |
| Power per stage | 50 kvar |
| Step-by-step construction | 50 |
| Connector position | Top |
| Capacitor technology | PowerLogic PFC capacitor |
| Pole description | 3P |
| Capacitor tolerance | -5 % to 10 % |
| [Ui] Rated insulation voltage | 690 V |
| [Uimp] Rated impulse voltage withstand | 6 kV |
| Max. permissible voltage | 1.1 x Un (8 hours over 24 hours) corresponds to IEC 60831 |
| [Imp] max. continuous current | Capacitor: 1.8 x inch at 480 V corresponds to IEC 60831; Battery: 1.43 x inch at 400 V corresponds to IEC 61439-2; Battery: 1.19 x inch at 415 V corresponds to IEC 61439-2 |
| Protection of main input switch | Power circuit breaker protection |
| Breaking capacity | Icu 35 kA |
| Accessibility for operation | front side |
| Colour | Grey (RAL 7035) |
| Maximum weight | 64 kg |
| Height | 700 mm |
| Width | 600 mm |
| Depth | 300 mm |
| Supplied accessories | Auxiliary transformer |
| Internal voltage converter | 400/230 V - 100 VA |
| Function available | alarm contact; generator set ejection contact |
| Contractual warranty |
| Warranty (in months) | 18 |
| Main features |
| Supply voltage | 400 V AC 50 Hz; 415 V AC 50 Hz |
| Reactive power indication | 50 kvar |
| Operating mode | Fixed |
| Product series | PowerLogic |
| Device short name | Fixed capacitor block |
| Product or component type | Capacitor bank |
| Mounting |
| Standards | IEC 61921; IEC 61439-2; IEC 61439-1 |
| Product certifications | EAC; ASEFA; CE |
| Mounting location | Indoor |
| Degree of protection (IP) | Safety: IPxx B; Environment: IP54 |
| Degree of protection (IK) | IK10 |
| Relative humidity | 0…95 % |
| Operating ambient temperature | -5…45 °C |
| Average ambient air temperature for operation | 35°C (annual); 45°C (over 24 hours) |
| Packaging units |
| VPE 1 type | PCE |
| Number of devices per package | 1 |
| VPE 1 height | 87,0 cm |
| VPE 1 width | 80,0 cm |
| VPE 1 length | 120,0 cm |
| Packaging weight (Lbs) | 33,0 kg |
The low-voltage reactive power compensation from the PowerLogic PFC family helps to avoid contractual penalties from energy suppliers. Save energy, reduce operating costs and reduce CO² emissions through reactive power compensation of inductive loads. This hardware is compatible with the power management software to take advantage of the benefits of digital power supply and enable seamless integration into EcoStruxture Power. Intelligent monitoring and measurement functions are available for safe operation. To optimize operation and maintenance in a wide range of applications, both in commercial and industrial areas. This version, suitable for mains voltage 400V 50Hz, delivers reactive power up to 50kvar. The compensation is automatically set by the reactive power controller of the PowerLogic PFC controller family. It is designed for mains harmonic voltages up to 4% or mains harmonic currents up to 10%, where the mains is defined as a low harmonic load network. The PowerLogic PFC Capacitor Banks IEC range is certified to CE, IEC 61921, IEC 61439 Part 1 and IEC61439 Part 2. It contains long life capacitors from the PFC capacitor family, designed to IEC831 Part 1 and IEC831 Part 2. And includes an intelligent controller with Modbus communication RS485. The RAL7035 enclosure is a wall mounted system with a bottom entry connection protected by a circuit breaker. The external dimensions of the enclosure are 800mm width, 300mm depth, 1000mm height and a maximum product weight of 64kg. As standard, the enclosures are IP31. Optional kits are available to easily convert them to IP54. This product is particularly suitable for reactive power compensation applications with stable loads.