Schneider Electric VLVAF3P03515AA, EAN: 3606489476571

Schneider Electric VLVAF3P03515AA compensation system 275 kvar

Energy > Energy Management > Compensation systems

Schneider Electric VLVAF3P03515AA compensation system 275 kvar

Lieske Part No. 1867023
Mfg Part No VLVAF3P03515AA
EAN-Code 3606489476571
Manufacturer Schneider Electric
Here only 20.206,50 EUR
24.045,74 EUR incl. VAT

Further information for Schneider Electric VLVAF3P03515AA compensation system 275 kvar

Complementary
Network pollution levelPolluted
[Gh/Sn] harmonic pollution rate25…50 %
[THDU] total harmonic distorsion of voltage4…7 %
Tuning factor3.8
Tuning frequency190 Hz
Power per step25 kvar
Step composition25 + 50 + 2x100
Location of connectionBottom
Controller typePowerLogic PFC Controller VPL6
capacitor technologyPowerLogic PFC Capacitor + Detuned Reactor
Poles description3P
Capacitance tolerance- 5 % to 10 %
[Ui] rated insulation voltage800 V
[Uimp] rated impulse withstand voltage8 kV
Maximum permissible voltage1.1 x Un (8 hours over 24 hours) conforming to IEC 60831
[Imp] maximum permanent currentCapacitor: 1.8 x In at 480 V conforming to IEC 60831; Battery: 1.19 x In at 400 V conforming to IEC 61439-2; Battery: 1.19 x In at 415 V conforming to IEC 61439-2
main incomer protectionCircuit breaker protection
Breaking capacityIcu 50 kA
Control typeRotary handle
Step protection typeOverload: harmonic control from PowerLogic PFC Controller; Short-circuit: fuse
Accessibility for operationFront
ColourGrey (RAL 7035)
maximum weight400 kg
Height2000 mm
Width800 mm
Depth600 mm
Provided equipmentAuxiliary transformer
Internal voltage transformer400/230 V - 630 VA
Function availableAlarm contact; GenSet shedding contact
Contractual warranty
Warranty (in months)18
Environment
StandardsIEC 61439-1; IEC 61439-2; IEC 61921
Product certificationsASEFA; EAC; CE
Mounting locationIndoor
IP degree of protectionEnvironment: IP31; Safety: IPxx B
IK degree of protectionIK10
Relative humidity0…95 %
Ambient air temperature for operation-5…45 °C
Average ambient air temperature for operation35 °C (annual) ; 45 °C (over 24 hours)
Main
Network rated voltage400 V AC 50 Hz; 415 V AC 50 Hz
Reactive power rating275 kvar
Operating modeAutomatic
RangePowerLogic
Device short nameautomatic capacitor bank with detuned reactor
Product or component typeCapacitor bank
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height80.000 cm
Package 1 Width120.000 cm
Package 1 Length210.000 cm
Package 1 Weight378.600 kg
The low-voltage reactive power compensation from the PowerLogic PFC family helps to avoid contractual penalties from energy suppliers. Save energy, reduce operating costs and reduce CO² emissions through reactive power compensation of inductive loads. This hardware is compatible with the power management software to take advantage of the benefits of digital power supply and enable seamless integration into EcoStruxture Power. Intelligent monitoring and measurement functions are available for safe operation. To optimize operation and maintenance in a wide range of applications, both in commercial and industrial areas. This version, suitable for mains voltage 400V 50Hz, delivers reactive power up to 275kvar with a detuning factor of 7%. The compensation is automatically set by the reactive power controller of the PowerLogic PFC controller family. It is designed for mains harmonic voltages up to 7% or mains harmonic currents up to 20%, where the mains is defined as a polluted harmonic network. The PowerLogic PFC Capacitor Banks IEC range is certified to CE, IEC 61921, IEC 61439 Part 1 and IEC61439 Part 2. It contains high life expectancy capacitors from the PFC capacitor family designed to IEC831 Part 1 and IEC831 Part 2. And contain an intelligent controller with Modbus communication RS485. The RAL7035 enclosure is a floor standing system with a bottom connection protected by a circuit breaker. The external dimensions of the enclosure are 800mm width, 600mm depth, 2000mm height and a maximum product weight of 400kg. As standard the enclosures are IP31. Optional kits are available to easily convert them to IP54. This product is particularly suitable for reactive power compensation applications with variable or unstable loads.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1867023
qrcode für Schneider Electric VLVAF3P03515AA compensation system 275 kvar