Schneider Electric VLVAF2P03507AG, EAN: 3606489476861

Schneider Electric VLVAF2P03507AG compensation system 75 kvar

Energy > Energy Management > Compensation systems

Schneider Electric VLVAF2P03507AG compensation system 75 kvar

Lieske Part No. 1867119
Mfg Part No VLVAF2P03507AG
EAN-Code 3606489476861
Manufacturer Schneider Electric
Here only 12.788,90 EUR
15.218,79 EUR incl. VAT

Further information for Schneider Electric VLVAF2P03507AG compensation system 75 kvar

Additional features
Network contamination levelContaminated
[Gh/Sn] harmonic load25…50 %
[THDU] Total harmonic distortion of voltage4…7 %
Tuning factor2,7
Tuning frequency135 Hz
Power per stage25 kvar
Step-by-step construction25 + 50
Connector positionBottom
Controller typePowerLogic PFC controller VPL6
Capacitor technologyPowerLogic PFC capacitor + filter choke
Pole description3P
Capacitor tolerance-5 % to 10 %
[Ui] Rated insulation voltage690 V
[Uimp] Rated impulse voltage withstand8 kV
Max. permissible voltage1.1 x Un (8 hours over 24 hours) corresponds to IEC 60831
[Imp] max. continuous currentCapacitor: 1.8 x inch at 480 V corresponds to IEC 60831; Battery: 1.12 x inch at 400 V corresponds to IEC 61439-2; Battery: 1.19 x inch at 415 V corresponds to IEC 61439-2
Protection of main input switchWithout protection
[Icw] rated short-time current withstand35 kA at 1 s (Icw)
Step protection typeOverload: harmonic control by PowerLogic PFC controller; Short-circuit: fuse
Accessibility for operationfront side
ColourGrey (RAL 7035)
Maximum weight350 kg
Height1400 mm
Width800 mm
Depth600 mm
Supplied accessoriesAuxiliary transformer
Internal voltage converter400/230 V - 400 VA
Function availablealarm contact; generator set ejection contact
Contractual warranty
Warranty (in months)18
Main features
Supply voltage400 V AC 50 Hz; 415 V AC 50 Hz
Reactive power indication75 kvar
Operating modeAutomatic
Product seriesPowerLogic
Device short nameAutomatic capacitor bank with filter circuit choke
Product or component typeCapacitor bank
Mounting
StandardsIEC 61439-1; IEC 61921; IEC 61439-2
Product certificationsCE; ASEFA; EAC
Mounting locationIndoor
Degree of protection (IP)Environment: IP31; Safety: IPxx B
Degree of protection (IK)IK10
Relative humidity0…95 %
Operating ambient temperature-5…45 °C
Average ambient air temperature for operation35°C (annual); 45°C (over 24 hours)
Packaging units
VPE 1 typePCE
Number of devices per package1
VPE 1 height150,0 cm
VPE 1 width80,0 cm
VPE 1 length120,0 cm
Packaging weight (Lbs)322,0 kg
The low-voltage reactive power compensation from the PowerLogic PFC family helps to avoid contractual penalties from energy suppliers. Energy savings, lower operating costs and reduce CO² emissions through reactive power compensation of inductive loads. This hardware is compatible with the power management software to take advantage of the benefits of digital power supply and enable seamless integration into EcoStruxture Power. Intelligent monitoring and measurement functions are available for safe operation. To optimize operation and maintenance in a wide range of applications, both in commercial and industrial areas. This version, suitable for mains voltage 400 V 50 Hz, delivers reactive power up to 75 kvar with a detuning factor of 14%. The compensation is automatically set by the reactive power controller of the PowerLogic PFC controller family. It is designed for mains harmonic voltages up to 7% or mains harmonic currents up to 20%, where the mains is defined as a polluted harmonic network. The PowerLogic PFC Capacitor Banks IEC range is certified to CE, IEC 61921, IEC 61439 Part 1 and IEC61439 Part 2. It contains high life expectancy capacitors from the PFC capacitor family designed to IEC831 Part 1 and IEC831 Part 2. And contain an intelligent controller with Modbus communication RS485. The RAL7035 enclosure is a floor standing system with a connection coming from below. The external dimensions of the enclosure are 800mm width, 600mm depth, 1400mm height and a maximum product weight of 350kg. As standard the enclosures are IP31. Optional kits are available to easily convert them to IP54. This product is particularly suitable for reactive power compensation applications with variable or unstable loads.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1867119
qrcode für Schneider Electric VLVAF2P03507AG compensation system 75 kvar