Complementary
Current consumption	5 mA at 5 V DC via bus connector at state on; 35 mA at 5 V DC via bus connector at state off; 0 mA at 24 V DC via bus connector at state on; 10 mA at 24 V DC via bus connector at state off; 1200 mA at 24 V DC external power supply at state on
Input voltage limits	19.2...28.8 V per input
Input current limits	5 mA per input
Response time	< 10 ms turn-on for input; < 10 ms turn-off for input
Output voltage	24 V DC for transistor output
Maximum load current	800 mA per channel in starting mode during 100 ms; 300 mA per channel in normal mode
Insulation	Between the RJ45 connectors and internal logic at 500 V AC; Non-insulated between RJ45 connectors
Output protection type	Against overload, protection technology: current limiter
Reset	Automatic reset
Local signalling	3 LEDs green for input status per channel; 2 LEDs green for output status per channel
Electrical connection	3 x 2.5 mm² removable screw terminal block with pitch 5.08 mm adjustment for connecting the 24 V DC power supply; 4 RJ45 connectors for connecting the motor starters
Mounting support	Top hat type TH35-15 rail conforming to IEC 60715; Top hat type TH35-7.5 rail conforming to IEC 60715; plate or panel with fixing kit
Height	90 mm
Depth	85 mm
Width	30 mm
Net weight	0.115 kg
DC supply voltage	24 V
Contractual warranty
Warranty (in months)	18
Environment
Product certifications	CE; cULus; UKCA; RCM; EAC
Marking	CE
Resistance to electrostatic discharge	8 kV in air conforming to EN/IEC 61000-4-2; 4 kV on contact conforming to EN/IEC 61000-4-2
Resistance to electromagnetic fields	10 V/m 80 MHz...1 GHz conforming to EN/IEC 61000-4-3; 3 V/m 1.4 GHz...2 GHz conforming to EN/IEC 61000-4-3; 1 V/m 2 GHz...3 GHz conforming to EN/IEC 61000-4-3
Resistance to magnetic fields	30 A/m 50/60 Hz conforming to EN/IEC 61000-4-8
Resistance to fast transients	1 kV for input conforming to EN/IEC 61000-4-4; 1 kV for output conforming to EN/IEC 61000-4-4
Surge withstand	1 kV input common mode conforming to EN/IEC 61000-4-5; 1 kV output common mode conforming to EN/IEC 61000-4-5
Resistance to conducted disturbances	10 V 0.15...80 MHz conforming to EN/IEC 61000-4-6; 3 V spot frequency (2, 3, 4, 6.2, 8.2, 12.6, 16.5, 18.8, 22, 25 MHz) conforming to Marine specification (LR, ABS, DNV, GL)
Electromagnetic emission	Radiated emissions - test level: 40 dBμV/m QP class A ( 10 m) at 30…230 MHz conforming to EN/IEC 55011; Radiated emissions - test level: 47 dBμV/m QP class A ( 10 m) at 230…1000 MHz conforming to EN/IEC 55011
Ambient air temperature for operation	-10…35 °C vertical installation; -10…55 °C horizontal installation
Ambient air temperature for storage	-25…70 °C
Relative humidity	10…95 %, without condensation (in operation); 10…95 %, without condensation (in storage)
IP degree of protection	IP20 with protective cover in place
Pollution degree	2
Operating altitude	0...2000 m
Storage altitude	0…3000 m
Vibration resistance	3.5 mm at 5…8.4 Hz on DIN rail; 3 gn at 8.4…150 Hz on DIN rail; 3.5 mm at 5…8.4 Hz on panel; 3 gn at 8.4…150 Hz on panel
Shock resistance	15 gn for 11 ms
Logistical informations
Country of origin	TW
Main
Range of product	Modicon TM3
Product or component type	Parallel interface module
Product specific application	TeSys U
[Us] rated supply voltage	24 V DC by external supply (- 15...20 %)
Number of input channels	12
Number of output channels	8
Range compatibility	Modicon M221; Modicon M251; Modicon M241; Modicon M262
Packing Units
Unit Type of Package 1	PCE
Number of Units in Package 1	1
Package 1 Height	7.500 cm
Package 1 Width	12.500 cm
Package 1 Length	10.500 cm
Package 1 Weight	215.000 g
Unit Type of Package 2	S04
Number of Units in Package 2	42
Package 2 Height	30.000 cm
Package 2 Width	40.000 cm
Package 2 Length	60.000 cm
Package 2 Weight	10.000 kg
Unit Type of Package 3	P12
Number of Units in Package 3	504
Package 3 Height	80.000 cm
Package 3 Width	105.000 cm
Package 3 Length	125.000 cm
Package 3 Weight	62.296 kg

TeSys motor starter module Modicon TM3. For expanding Modicon M221, M241, M251 and M262 PLC controllers with I/O channels. Compatible with third-party controllers using Modicon TM3 bus coupler. Enables connection of up to 4 TeSys motor starters via RJ45 connections and quick connection system. The power supply is via 24VDC. Planning and configuration using EcoStruxure Machine Expert software or standalone configurator (download from www.se.com). Ambient temperature during operation -10°C to +55°C. Mounting on 35mm DIN rail or directly on control panel with optional holder. Certifications according to CE, UL, CSA.