Complementary
Discrete input compatibility	16 conforming to IEC 61131-2 type 3
Discrete input current	5 mA
Voltage state 1 guaranteed	15...28.8 V DC
Voltage state 0 guaranteed	0...5 V DC
Current state 1 guaranteed	>= 2.5 mA
Input impedance	4.4 kOhm
Response time on input	4 ms (maximum (turn on)); 4 ms (maximum (turn off))
Safety reliability data	MTBF = 250 years 40 °C
Sensor power supply	19.2…28.8 V
Power supply type	Electronic powered by internal bus
Typical current consumption	34 mA at 5 V DC; 5 mA
Electrical connection	HE-10 connector for inputs
Maximum cable distance between devices	Unshielded cable:
Isolation between channels and bus	500 V AC
Local signalling	1 LED per channel (green) for input status
Housing colour	Grey
Mounting support	Top hat type TH35-15 rail conforming to IEC 60715; Top hat type TH35-7.5 rail conforming to IEC 60715; plate or panel with fixing kit
Height	90 mm
Width	21.4 mm
Depth	81.3 mm
Net weight	0.65 kg
Contractual warranty
Warranty (in months)	18
Environment
IP degree of protection	IP20
Protective treatment	None
Marking	CE
Product certifications	CE; CULus; UKCA; RCM; EAC; CULus HazLoc
Standards	IEC 61131-2
Ambient air temperature for operation	-10…35 °C (vertical installation); -10…55 °C (horizontal installation)
Ambient air temperature for storage	-25…70 °C
Relative humidity	10…95 % without condensation for operation; 10…95 % without condensation for storage
Operating altitude	0...2000 m
Pollution degree	2
Vibration resistance	3.5 mm (f = 5…8.4 Hz) on DIN rail; 3 gn (f = 8.4…150 Hz) on DIN rail; 3.5 mm (f = 5…8.4 Hz) on panel mounting; 3 gn (f = 8.4…150 Hz) on panel mounting
Shock resistance	15 gn for 11 ms
Logistical informations
Country of origin	TW
Main
Range of product	Modicon TM3
Product or component type	Discrete input module
Range compatibility	Modicon M241; Modicon M251; Modicon M221; Modicon M262
Device application	Industrial application
Discrete input number	16
Discrete input voltage	24 V DC
Discrete input logic	Sink or source (positive/negative)
Packing Units
Unit Type of Package 1	PCE
Number of Units in Package 1	1
Package 1 Height	7.5 cm
Package 1 Width	12.5 cm
Package 1 Length	10.5 cm
Package 1 Weight	179.0 g
Unit Type of Package 2	S04
Number of Units in Package 2	42
Package 2 Height	30 cm
Package 2 Width	40 cm
Package 2 Length	60 cm
Package 2 Weight	8.326 kg
Unit Type of Package 3	P12
Number of Units in Package 3	504
Package 3 Height	105 cm
Package 3 Width	120 cm
Package 3 Length	80 cm
Package 3 Weight	106 kg

Modicon TM3 digital input module. For expanding Modicon M221, M241, M251 and M262 PLC controllers with I/O channels. Compatible with third-party controllers using Modicon TM3 bus couplers. A total of 16 digital inputs, designed as sink/source logic inputs. I/O channels with 24VDC input voltage. Configurable input filter for improved signal acquisition speed or to reduce noise effects. Configurable latching function for capturing pulses with a shorter amplitude width than the controller's sampling time. Project planning and configuration using EcoStruxure Machine Expert software or standalone configurator (download from www.se.com). Connection via HE10 connector. Ambient temperature during operation -10°C to +55°C. Mounting on 35mm DIN rail or directly on control panel with optional holder. Certifications according to CE, cULus/CSA, EAC, RCM, cULus Hazardous Location.